Abstract
The paper presents the results of studies of the cutting properties and wear mechanism of the edge cutting tool equipped with replaceable indexable inserts made of cutting ceramic with nanoscale multilayer composite coatings when cutting hardened steel. It has been shown that applying the latter allows one to tune the contact processes based on the changes in friction and lengths of dense and complete contacts between the chip and the rake face of the cutting tools, thereby reducing normal contact strains and the probability of macro- and microbrittle fracture in the contact areas of the tool.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Vereshchaka, A.S., Rabotosposobnost’ rezhushchego instrumenta s iznosostoikimi pokrytiyami (Efficiency of Cutting Tool with Wear-Resistant Coatings), Moscow: Mashinostroenie, 1993.
Kuzin, V.V., Instrumenty s keramicheskimi rezhushchimi plastinami (Tools with Ceramic Cutting Plates), Moscow: Yanus-K, 2006.
Talantov, N.V., Fizicheskie osnovy protsessa rezaniya, iznashivaniya i razrusheniya instrumenta (Physical Foundations of Process of Cutting, Wear and Fracture of Tool), Moscow: Mashinostroenie, 1992.
Shuster, L.M., Adgezionnoe vzaimodeistvie rezhushchego instrumenta s obrabatyvaemym materialom (Adhesion Interaction of Cutting Tool with Processed Material), Moscow: Mashinostroenie, 1988.
Vereshchaka, A.A., Vereshchaka, A.S., Mgaloblishvili, O., Morgan, M.N., and Batako, A.D., Nanoscale multilayered-composite coatings for the cutting tools, Int. J. Adv. Manuf. Technol., 2014, vol. 72, pp. 303–317.
Vereshchaka, A.S. and Kushner, V.S., Rezanie materialov (Cutting of Materials), Moscow: Vysshaya Shkola, 2009.
Vereshchaka, A.S., Vereschaka, A.A., and Kirillov, A.K., Ecologically friendly dry machining by cutting tool from layered composition ceramic with nano-scale multilayered coatings, Prec. Mach. VI Book Ser.: Key Eng. Mater., 2012, vol. 496, pp. 67–74.
Grigoriev, S.N., Vereschaka, A.A., Vereshchaka, A.S., and Kutin, A.A., Cutting tools made of layered composite ceramics with nano-scale multilayered coatings, Proc. 5th CIRP Conf. on High Performance Cutting, 2012; Book Series: Procedia CIRP 2012, vol. 1, pp. 301–306.
Vereshchaka, A.S., Grigoriev, S.N., Sotova, E.S., and Vereshchaka, A.A., Improving the efficiency of the cutting tools made of mixed ceramics by applying modifying nano-scale multilayered coatings, Adv. Manufact. Sci. Eng., PTS 1-4 Book Ser.: Adv. Mater. Res., 2013, vol. 712–715, pp. 391–394.
Vereshchaka, A.S., Grigoriev, S.N., Tabakov, V.P., Sotova, E.S., Vereshchaka, A.A., and Kulikov, M.Yu., Improving the efficiency of the cutting tool made of ceramic when machining hardened steel by applying nano-dispersed multi-layered coatings, Prec. Mach. VI Book Ser.: Key Eng. Mater., 2014, vol. 581, pp. 68–73.
Vereshchaka, A.A., Volosova, M.A., Grigoriev, S.N., and Vereshchaka, A.S., Development of wear-resistant complex for high-speed steel tool when using process of combined cathodic vacuum arc deposition, Procedia CIRP 9C, 2013, pp. 8–12.
Vereshchaka, A.A., Vereshchaka, A.S., and Anikeev, A.I., Carbide tools with nano-dispersed coating for high-performance cutting of hard-to-cut materials, Appl. Mech., Fluid Solid Mech. Book Ser.: Adv. Mater. Res., 2014, vol. 871, pp. 164–170.
Adaskin, A.M., Vereshchaka, A.A., and Vereshchaka, A.S., Study of wear mechanism of hardalloy tools during machining of refractory alloys, J. Frict. Wear, 2013, vol. 34, pp. 208–213.
Poletika, M.F., Kontaktnye nagruzki na rezhushchikh poverkhnostyakh instrumentov (Contact Loading on Cutting Surfaces of Tools), Moscow: Mashgiz, 1962.
Nekrasov, Yu.I., Development of methodology of treatment management at sharpening of refractory steels and alloys on the machines with digital programming management, Doctoral (Eng.) Dissertation, Tyumen’, 2010.
Vasin, S.A., Vereshchaka, A.S., and Kushner, V.S., Rezanie materialov: Termomekhanicheskii podkhod k sisteme vzaimosvyazei pri rezanii: Ucheb. dlya tekhn. VUZov (Cutting of Materials. Thermomechanical Approach to the System of Interconnections at Cutting. A Tutorial for Techn. Inst. Higher Educ.), Moscow: Mos. Gos. Tekhn. Univ., 2001.
Poletika, M.F., Kontaktnye nagruzki na rezhushchikh poverkhnostyakh instrumentov (Contact Loading on Cutting Surfaces of Tools), Moscow: Mashgiz, 1962.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.A. Vereshchaka, E.S. Sotova, A.D. Batako, M.I. Sedykh, A.S. Vereshchaka, 2014, published in Trenie i Iznos, 2014, Vol. 35, No. 6, pp. 699–707.
About this article
Cite this article
Vereshchaka, A.A., Sotova, E.S., Batako, A.D. et al. A study of the cutting properties and wear mechanism of ceramic edge tools with nanostructure multilayer composite coatings. J. Frict. Wear 35, 483–488 (2014). https://doi.org/10.3103/S1068366614060166
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068366614060166