Abstract
The paper reviews the present-day trends in the development of new types of wear-resistant coatings, including nanostructured ones, for PCBN tools. The main currently pursued approaches to creation of high-hardness nanostructured coatings are discussed. Based on the analysis of wear behavior of PCBN tools, some new approaches to the development of promising wear-resistant coating systems have been identified, namely: (i) selecting the structural components of a coating, which should act as a hard grease to effectively reduce the tool wear rate; (ii) adding the compounds that inhibit any chemical reactions in the cutting zone; (iii) reducing the friction coefficient and contact loads through the use of solid lubricants and running-in layers of a coating; (iv) providing a coating with the required structural state.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
https://doi.org/www.iscar.com/Products.aspx/CountryID/1/ProductId/63.
Fatih, T., Çolak, O, Kayacan, M., Investigation of TiN coated CBN and CBN cutting tool performance in hard milling application, Strojniški vestnik–J. Mechan. Eng., 2011, vol. 57, no. 5, pp. 417–424.
de Siqueira, G.G., Stipkovic, F.M., and Ferreira, B.G., Hard turning of tempered DIN 100Cr6 steel with coated and no-coated CBN inserts, J. Mater. Proc. Technol., 2006, vol. 179, pp. 146–153.
Coelho, R.T., Ng, E.G., and Elbestawi, M.A., Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions, Int. J. Machine Tools Manufact., 2007, vol. 47, pp. 263–272.
M’Saoubi, R., Johansson, M.P., and Andersson, J.M., Wear mechanisms of PVD-coated PCBN cutting tools, Wear, 2013, vol. 302, no. 1–2, pp. 1219–1229.
Wada, T. and Hanyu, H., Tool wear of (Ti, Al) N-coated polycrystalline cubic boron nitride compact in cutting of hardened steel, IOP Conf. Ser.: Mater. Sci. Eng., 2017, vol. 264, pp. 1–8.
Veprek, S., Veprek-Heijman, M., Karvankova, P., and Prochazka, J., Different approaches to superhard coatings and nanocomposites, Thin Solid Films, 2005, vol. 476, pp. 1–29.
Veprek, S. and Argon, A.S., Towards the understanding of mechanical properties of super- and ultrahard nanocomposites, J. Vac. Sci. Technol. B, 2002, vol. 20, no. 2, pp. 650–664.
Beresnev, V.M., Sobol', O.V., Pogrebnyak, A.D., et al., Structure and properties of TiAlSiY coatings applied by vacuum-arc deposition in nitrogen atmosphere, Fiz. Khim. Obrab. Mater., 2017, no. 2, pp. 34–43.
Musil, J., Physical and mechanical properties of hard nanocomposite films prepared by reactive magnetron sputtering, in Cavaleiro, A. and de Hosson, J.T.M. (Eds.), Nanostructured Coatings. Nanostructure Science and Technology, New York: Springer, 2006.
Azarenkov, N.A., Beresnev, V.M., Pogrebnyak, A.D., and Kolesnikov, D.A., Nanostrukturnye pokrytiya i nanomaterialy. Osnovy polucheniya. Svoistva. Oblasti primeneniya. Osobennosti sovremennogo nanostrukturnogo napravleniya v nanotekhnologii (Nanostructured Coatings and Nanomaterials. Fundamentals of Production. Properties. Applications. Special Features of Present-Day Nanostructure Tendency in Nanotechnology), Moscow: LIBROKOM, 2012.
Münz, W.D., Smitho, I.J., Schönjahn, C., Deeming, A.P., and Clapham, S., PVD superlattice structured hard coatings designed for dry high speed machining, in II Int. Seminar on Improving Machining Tool Performance, 2000. http://imtp.free.fr/imtp2/B2/Munz.pdf (27.10.2016).
Grankin, S.S., Phase Composition and Physical-Mechanical Properties of Nanostructured Composite Coatings Based on Nitrides of Refractory Metals, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Kharkiv, 2016.
Patscheider, J., Nanocomposite hard coatings for wear protection, MRS Bulletin, 2003, vol. 28, pp. 180–183.
Chim, Y.C., Ding, X.Z., Zeng, X.T., and Zhang, S., Oxidation resistance of TiN, CrN, TiAlN and CrAlN coatings deposited by lateral rotating cathode arc, Thin Solid Films, 2009, vol. 517, pp. 4845–4849.
Reshetnyak, O.M. and Strel’nitskii, O.M., Synthesis of hardening nanostructured coatings, Vopr. Atom. Nauk. Tekhn., 2008, no. 2, pp. 119–130.
Veprek, S., Maritz, G., and Veprek-Heijman, J., Concept for the design of superhard nanocomposites with high thermal stability: their preparation, properties, and industrial applications, in Cavaleiro, A. and de Hosson, J.T.M. (Eds.), Nanostructured Coatings. Nanostructure Science and Technology, New York: Springer, 2007, pp. 347–406.
Beresnev, V.M., Pogrebnyak, A.D., Azarenkov, N.A., Farenik, V.I., and Kirik, G.V., Nanocrystalline and nanocomposite coatings, structure, properties, Fiz. Inzh. Poverkhn., 2007, vol. 5, no. 1–2, pp. 4–27.
Zeman, P., Musil, J., and Daniel, R., High-temperature oxidation resistance of Ta–Si–N films with a high Si content, Surf. Coat. Technol., 2006, vol. 200, pp. 4091–4096.
Podchernyaeva, I.A., Klimenko, S.A., Beresnev, V.M., Panashenko, V.M., Toryanik, I.N., Klimenko, S.An., and Kopeikina, M.Yu., Formation of a tribofilm in the surface layer of Al–Ti–Cr–N–B magnetron coating on boron nitride during turning of hardened steel, Powder Metall. Metal Ceram., 2015, vol. 54, no. 3/4, pp. 140–150.
Klimenko, S.A., Klimenko, S.An., Manokhin, A.S., and Beresnev, V.M., Special features of the applications of cutting tools from polycrystalline cubic boron nitride with protective coatings, J. Superhard Mater., 2017, vol. 39, no. 4, pp. 288–297.
Kopeikinalimenko, S.A., Mel’niichuk, Yu.A., and Beresnev, V.M., Efficiency of cutting tools equipped with cBN-based polycrystalline superhard materials having vacuum–plasma coating, J. Superhard Mater., 2008, vol. 30, no. 5, pp. 355–362.
Turkevich, V.Z., Klimenko, S.A., and Kulik, O.G., Termodynamics of the interaction in the CBN-based tool material–Fe(Ni) system, Transactions FMI, 1999, vol. XXVIII, no. 2, pp. 8–11.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.S. Manokhin, S.A. Klimenko, S.An. Klimenko, V.M. Beresnev, 2018, published in Sverkhtverdye Materialy, 2018, Vol. 40, No. 6, pp. 78–88.
About this article
Cite this article
Manokhin, A.S., Klimenko, S.A., Klimenko, S.A. et al. Promising Types of Coatings for PCBN Tools. J. Superhard Mater. 40, 424–431 (2018). https://doi.org/10.3103/S1063457618060084
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1063457618060084