Abstract
The formation of surface microrelief on rolled strip is considered. The influence of the surface state of the rolls, the strip reduction, the rate of reduction, the mechanical properties of the metal, the lubricant employed, and other rolling and tempering parameters on the roughness of cold-rolled steel strip is analyzed. Practical means of ensuring compliance with the surface-roughness standards for thin sheet are proposed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Mazur, V.L., and Nogovitsyn, A.V., Teoriya i tekhnologiya tonkolistovoi prokatki (chislennyi analiz i tekhnologicheskie prilozheniya) (Theory and Technology of Thin-Sheet Rolling: Numerical Analysis and Engineering Applications), Dnepropetrovsk: Dnipro-Val, 2012.
Mazur, V.L., Surface roughness of thin steel sheet: Requirements and production technology, Steel Transl., 2012, vol. 42, no. 1, pp. 56–60.
Mazur, V.L., Production of rolled steel specified surface roughness, Steel Transl., 2015, vol. 45, no. 5, pp. 371–377.
Belov, V.K., Begletsov, D.O., D’yakonova, M.V., and Gorbunov, A.V., Sheet production with regulated surface microtopography, Steel Transl., 2014, vol. 44, no. 4, pp. 298–305.
Raimbekov, A.M., Tevs, V.I., Zakolyukin, S.B., and Isaeva, T.I., Efficiency of electroerosive texturing of working rolls, Stal’, 2006, no. 2, pp. 38–40.
Kimura, Y., Veno, M., and Mihara, Y., Printing behavior of roll surface texture to hot-dip galvanized steel sheet in temper rolling, J. Iron Steel Inst. Jpn., 2009, vol. 95, no. 5, pp. 399–405.
Mazur, V.L. and Timoshenko, V.I., Teoriya prokatki (gidrodinamicheskie effekty smazki) (The Theory of Rolling: Hydrodynamic Effects of Lubrication), Moscow: Metallurgiya, 1989.
Pawelski, H., Interaction between Mechanics and Tribology for Cold Rolling of Strip with Special Emphasis on Surface Evolution, Freiberg: Tech. Univ. Bergakademie, 2004.
Espenhahn, M. and Hunting, A., Transferring the roughness of the rolls to the surface of a thin cold-rolled sheet, Chern. Met., 1975, no. 24, pp. 8–14.
Mazur, V.L., Proizvodstvo lista s vysokokachestvennoi poverkhnost’yu (Production of Sheet with High Surface Quality), Kiev: Tekhnika, 1982.
Tret’yakov, A.V., Tret’yakov, E.M., and Migacheva, G.N., Dressirovka i kachestvo tonkogo lista (Pinch Rolling and Quality of Thin Sheet), Moscow: Metallurgiya, 1977.
Mazur, V.L. and Timoshenko, V.I., Lubricant action of emulsions in rolling: theory and practice, Steel Transl., 2017, vol. 47, no. 7, pp. 483–490.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.L. Mazur, 2018, published in Stal’, 2018, No. 1, pp. 25–30.
About this article
Cite this article
Mazur, V.L. Ensuring Specified Surface Roughness in the Production of Thin Cold-Rolled Steel Sheet. Steel Transl. 48, 49–54 (2018). https://doi.org/10.3103/S0967091218010102
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091218010102