Abstract
Low-cycle fatigue of the superalloy VZh175 heat-resistant alloy was studied under controlled deformation at room and high temperatures. The parameters of cyclic elastoplastic deformation and characteristics of fatigue strength were considered. The peculiarities of nucleation and development of low-cycle fatigue cracks were studied.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Inozemtsev, A.A., Ratchiev, A.M., Nikhamkin, M.Sh., et al., Low-cycle fatigue and cyclic crack resistance of a nickel alloy under loading specific for turbine disks, Tyazh. Mashinostr., 2011, no. 4, pp. 30–33.
Kablov, E.N., Innovative developments of the All-Russian Scientific Research Institute of Aviation Materials within the project “Strategic development of materials and technologies of their recycling until 2030,” Aviats. Mater. Tekhnol., 2015, no. 1, pp. 3–33.
Terent’ev, V.F., Ustalost’ metallicheskikh materialov (Fatigue of Metal Materials), Moscow: Nauka, 2003.
Reed, R.C., The Superalloys: Fundamentals and Applications, Cambridge: Cambridge Univ. Press, 2006.
Gorbovets, M.A., Bazyleva, O.A., Belyaev, M.S., and Khodinev, I.A., Low-cycle fatigue of VKNA type single- crystal intermetallic alloy under “hard” loading conditions, Metallurgist, 2014, vol. 58, nos. 7–8, pp. 724–728.
Belyaev, M.S., Terent’ev, V.F., Gorbovets, M.A., Bakradze, M.M., and Antonova, O.S., Low-cycle fatigue of a high-temperature nickel alloy VZh175 under hard loading, Deform. Razrushenie Mater., 2015, no. 9, pp. 17–24.
Golubovskiy, E.R., Svetlov, I.L., Petrushin, N.V., Cherkasova, S.A., and Volkov, M.E., Low-cycle fatigue of nickel superalloy single crystals at elevated temperatures, Russ. Metall. (Engl. Transl.), 2010, vol. 2010, no. 8, pp. 941–947.
Wright, J.K., Carroll, L.J., Simpson, J.A., et al., Low cycle fatigue of alloy 617 at 850°C and 950°C, J. Eng. Mater. Technol., 2013, vol. 135, no. 7, pp. 031005 (1-8).
Zhong, Z., Gu, Y., Yuan, Y., et al., On the low cycle fatigue behavior of a Ni-based superalloy containing high Co and Ti contents, Mater. Sci. Eng., A, 2012, vol. 552, pp. 434–443.
Gao, G., Duan, S., and Zhang, W., A study of high temperature low cycle fatigue life prediction for two superalloys, J. Eng. Res., 2015, vol. 3, no. 1, pp. 114–126.
Gao, G., Duan, S., and Zhang, W., Low cycle fatigue life prediction for GH 4133 at 550°C based on powerexponent function, J. Eng. Res., 2015, vol. 3, no. 3, pp. 111–124.
Maier, G., Riedel, H., and Somsen, C., Cyclic deformation and lifetime of alloy 617B during isothermal low cycle fatigue, Int. J. Fatigue, 2013, vol. 55, pp. 126–135.
Kablov, E.N., Ospennikova, O.G., Lomberg, B.S., and Sidorov, V.V., Advanced technologies for the production of heat-resistant materials for aircraft engine manufacturing, Probl. Chern. Metall. Materialoved., 2013, no. 3, pp. 47–54.
Lomberg, B.S., Ovsepyan, S.V., Bakradze, M.M., et al., High temperature heat resistant nickel alloys for gas turbine engine parts, Aviats. Mater. Tekhnol., 2012, suppl., pp. 52–57.
Bakradze, M.M., Ovsepyan, S.V., Shugaev, S.A., and Letnikov, M.N., Effect of quenching on the structure and properties of forgings from the nickel heat-resistant alloy EK151-ID, Tr. Vseross. Inst. Aviats. Mater., 2013, no. 9, art. 01. http://www.viamworks.ru. Accessed February 12, 2015.
Lomberg, B.S., Ovsepyan, S.V., and Bakradze, M.M., Specific alloying and heat treatment of high-temperature nickel alloys for the discs of new generation gas turbine engine, Aviats. Mater. Tekhnol., 2010, no. 2, pp. 3–8.
Kablov, E.N., Ospennikova, O.G., and Lomberg, B.S., Complex innovative technology of isothermal stamping in air in superplasticity mode of disks made of superheat resistant alloys, Aviats. Mater. Tekhnol., 2012, suppl., pp. 117–129.
Kablov, E.N., Petrushin, N.V., Svetlov, I.L., and Demonis, I.M., New nickel casted heat-resistant alloys, Aviats. Mater. Tekhnol., 2012, suppl., pp. 36–51.
Stepnov, M.N. and Shavrin, A.V., Statisticheskie metody obrabotki rezul’tatov mekhanicheskikh ispytanii: spravochnik (Statistical Data Processing of the Results of Mechanical Tests: Handbook), Moscow: Mashinostroenie, 2005.
Golubovskii, E.R., Volkov, A.S., Volkov, S.N., et al., Characteristics of the constructional strength (lowcycle fatigue and crack growth rate due to fatigue) of the metal stampings of disks made of the EI698VD alloy produced by Ruspolimet Company, Aviats.-Kosm. Tekh. Tekhnol., 2010, no. 9, pp. 82–86.
Velikanova, N.P., Statistical analysis of experimental study results on low-cycle fatigue resistance for the EI698-VD high-temperature alloy, Russ. Aeronaut., 2009, vol. 52, no. 4, pp. 413–418.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © M.S. Belyayev, V.F. Terentyev, M.A. Gorbovets, M.M. Bakradze, O.S. Antonova, 2017, published in Materialovedenie, 2017, No. 3, pp. 18–24.
Rights and permissions
About this article
Cite this article
Belyayev, M.S., Terentyev, V.F., Gorbovets, M.A. et al. Low-Cycle Fatigue under Controlled Deformation and Fracture of the Superalloy VZh175. Inorg. Mater. Appl. Res. 9, 1–8 (2018). https://doi.org/10.1134/S2075113318010033
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113318010033