Abstract
Desulfurization performance was evaluated by an adsorption model or real oil (diesel and kerosene) at low temperature using nanocrystalline NiO/Al2O3-1 adsorbent in static equipment. The properties of the NiO/Al2O3 adsorbent samples were characterized by BET surface areas, transmission electron microscopy, FTIR spectra, and TG-DTG curves. Desulfurization experimental results indicated that the desulfurization efficiency for kerosene is much higher than that for diesel due to the π-electronic interaction and S–M bonds with NiO/Al2O3-1 adsorbent. Also, a performance of adsorbent regeneration was kept well for multiple cycles.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Seredych, M., Rawlins, J., and Bandosz, T.J., Ind. Eng. Chem. Res, 2011, vol. 50, no. 24, pp. A5124–A5124.
Li, H., Xue, J., and Zhu, W., Ind. Eng. Chem. Res., 2009, vol. 48, no. 19, pp. 9034–9039.
Song, C. and Ma, X., Appl. Catal., B: Environ., 2003, vol. 41, nos. 1, 2, pp. 207–238.
Sentorun-Shalaby, C., et al., Appl. Catal., B: Environ., 2011, vol.101, no. 3, pp. 718–726.
Song, C., Catal. Today, 2003, vol. 86, nos. 1–4, pp. 211–263.
Tang, X., et al., Ind. Eng. Chem. Res., 2011, vol. 50, no.15, pp. 9363–9367.
Velu, S., Xiaoliang, Ma, and Song, C., Ind. Eng. Chem. Res, 2003, vol. 42, no. 21, pp. 5293–5304.
Zhang, S., Zhang, Q., and Zhang, Z.C., Ind. Eng. Chem. Res., 2003, vol. 43, no. 2, pp. 614–622.
Yi, N., et al., Fuels, 2013, vol. 103, no. 1, pp. 997–1002.
Dehkordi, A.M., Kiaei, Z., and Sobati, M.A., Fuel Process. Technol., 2009, vol. 90, no. 3, pp. 435–445.
And, O.E. and Yen, T.F., Energy Fuels, 2007, vol. 21, no. 4, pp. 2250–2257.
Sarda, K.K., et al., Fuels, 2012, vol. 93, no. 1, pp. 86–91.
Sachdeva, T.O. and Pant, K.K., Fuel. Process. Technol., 2010, vol. 91, no. 9, pp. 1133–1138.
Huang, H.Y., Andand, R.T.Y., and Ning, C., Langmuir, 1999, vol. 15, no. 22, pp. 7647–7652.
Robertson, S.D., et al., J. Catal., 1975, vol. 37, no. 3, pp. 424–431.
Hussain, A.H.M.S. and Tatarchuk, B.J., Fuels, 2013, vol. 107, no. 9, pp. 465–473.
Wang, J., et al., J. Hazard. Mater., 2009, vol. 163, nos. 2, 3, pp. 538–543.
Ge, H., Tang, M., and Wen, X.D., Applying Nanotechnology to the Desulfurization Process in Petroleum Engineering, King Fahd University of Petroleum and Minerals, IGI, 2016.
Xiangxin Yang, et al., Ind. Eng. Chem. Res., 2007, vol. 46, no. 14, pp. 4819–4823.
Kang, X., et al., Anal. Chim. Acta, 2007, vol. 587, no. 1, pp. 75–81
Song, H., et al., Ind. Eng. Chem. Res., 2014, vol. 53, no. 37, pp. 14552–14557.
Tang, X.L. and Shi, L., Langmuir, 2011, vol. 27, no. 19, pp. 11999–2007.
Timko, M.T., et al., Energy Fuels, 2014, vol. 28, no. 5, pp. 2977–2983.
Duan, L., et al., J. Phys. Chem. C, 2012, vol. 116, no. 49, pp. 25748–25756.
Lee, M.S., Lee, G.D., and Hong, S.S., Ind. Eng. Chem. Res., 2003, vol. 9, no. 4, pp. 412–418.
Author information
Authors and Affiliations
Corresponding author
Additional information
The text was submitted by the authors in English.
Rights and permissions
About this article
Cite this article
Tang, Xd., Lu, H., Li, Jj. et al. Adsorption desulfurization performance and mechanism over nanocrystalline NiO/Al2O3-1 adsorbent. Russ J Appl Chem 89, 2043–2049 (2016). https://doi.org/10.1134/S1070427216120168
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427216120168