Abstract
The processing modes and operating properties of wood-based materials depend in many respects on the structure, density, and moisture of wood, the determination of which by traditional methods in production conditions presents great difficulties. Therefore, in recent years there has been an interest in applying physical nondestructive methods of testing in the area of manufacturing wood-based materials and investigations of their properties. The performed studies showed that it is possible to use computer tomography and magnetic-resonance imaging methods for evaluating latent defects of wood, its density, and moisture. The joint use of these methods is of special interest, which is intended to increase the reliability of evaluation of wood density, based on which the strength of future lumber is forecast. The application of radiography enables one not only to determine the structure of wood and glued layers but to indirectly evaluate the strength of gluing.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Ugolev, B.N., Drevesinovedenie s osnovami lesnogo tovarovedeniya (Science of Wood with Principles of Wood Merchandising), Moscow: MGUL, 4th ed., 2007.
Poluboyarinov, O.I., Plotnost drevesiny (Wood Density), Moscow: Lesnaya Prom., 1976.
Wei, Q., Leblon, B., and La Rocque A, On the use of X-ray computed tomography for determining word properties: a review, Can. J. For. Res., no. 41, 2011, pp. 2120–2140.
Bhandarkar, S.M., Faust, T.D., and Tang, M., Catalog: a system for defection and rendering of internal log defects using computer tomography, Mach. Vision Appl., 1999, vol. 11, no. 4, pp. 171–190.
Lyungetyud F., Mote, F., Bakhshieva, M.A., Chubiskii, A.N., Sharpent’e P., Bombard’e V., and Tambi, A.A., Investigation of the identification process of wood species based on macroscopic signs using the computer tomography, Izv. S.-Peterb. Lesotekh. Akad., 2013, no. 202, pp. 158–168.
Karmadonov, A.N., Defektoskopiya drevesiny (Wood Flaw Detection), Moscow: Lesnaya Prom., 1987.
Goncharov, N.A., Bashinskii, V.Yu., and Buglai, B.M., Tekhnologiya izdelii iz drevesiny (Technology of Wood Products), Moscow: Lesnaya Prom., 1990.
Lakatosh, B.K., Defektoskopiya drevesiny (Wood Flaw Detection), Moscow: Lesnaya Prom., 1966.
Tambi, A.A., Teppoev, A.V., Shimkevich, Yu.A., and Gal’sman, I.E., Procedure of using magnetic resonance imaging for evaluating the internal structure and moisture of rounds lumber, Izv. S.-Peterb. Lesotekh. Akad., 2013, no. 203, pp. 100–107.
Chubinskii, A.N. and Tambi, A.A., Method of testing glued joints in the process of manufacturing glued bars from the whole timber, Izv. S.-Peterb. Lesotekh. Akad., 2008, no. 185, pp. 208–213.
Chubinsky, A.N., Motoaki, O., and Junji, S., Observation on the Deformation of Wood Cells in the Gluing Process of Veneer, Bull. Tokyo Univ. For., Tokyo: Tokyo Univ., 1990, no. 82, pp. 131–135.
Kaznacheeva, A.O., Possibilities and restrictions of the high-field magnetic resonance imaging (1.5 and 3 T), X-ray Diagnos. Therapy, 2010, no. 4, pp. 83–87.
Trofimova, T.N., Medvedev, Yu.A., Anan’eva, N.I., Sukhatskaya, A.V., Zabrodskaya, Yu.M., and Kaznacheeva, A.O., Use of postmortem magnetic resonance imaging of cerebrum in the postmortem examination, Pathology Archive, 2008, vol. 70, no. 3, pp. 23–28.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.N. Chubinskii, A.A. Tambi, A.V. Teppoev, N.I. Anan’eva, S.O. Semishkur, M.A. Bakhshieva, 2014, published in Defektoskopiya, 2014, Vol. 50, No. 11, pp. 76–84.
Rights and permissions
About this article
Cite this article
Chubinskii, A.N., Tambi, A.A., Teppoev, A.V. et al. Physical nondestructive methods for the testing and evaluation of the structure of wood-based materials. Russ J Nondestruct Test 50, 693–700 (2014). https://doi.org/10.1134/S1061830914110023
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1061830914110023