Abstract
This paper presents the theory of irreversible deformations that allows one to analyze large deformations of metals and determine the characteristics of the stress-strain state, deformation damage, and structural characteristics at various structural levels.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
V. N. Kukudzhanov, Computer Simulation of Deformation, Damage, and Fracture of Inelastic Materials and Structures (Moscow Inst. of Physics and Technology, 2008) [in Russian].
B. Berisha, P. Hora, and A. Wahlen, “A Dislocation Based Material Model for Warm Forming Simulation,” Int. J. Mater. Form. 1(3), 135–141 (2008); DOI: https://doi.org/10.1007/s12289-008-0367-7.
A. Yu. Ishlinskii and D. D. Ivlev, Mathematical Theory of Plasticity (Fizmatlit, Moscow, 2001) [in Russian].
J.-L. Chaboche, “A Review of Some Plasticity and Viscoplasticity Constitutive Theories,” Int. J. Plasticity, No. 24, 1642–1693 (2008).
V. L. Kolmogorov, Mechanism of Pressure Treatment of Metals (Ural State Tech. Univ., Yekaterinburg, 2001) [in Russian].
A. A. Bogatov, Mechanical Properties and Fracture Models of Metals (Ural State Tech. Univ., Yekaterinburg, 2002) [in Russian].
A. S. Khan, B. Farrokh, and L. Takacs, “Compressive Properties of Cu with Different Grain: Sub-Micron to Nanometer Realm,” J. Mater. Sci., No. 43, 3305–3313 (2008); DOI: https://doi.org/10.1007/s10853-008-2508-2.
V. V. Rybin, “Formation of Mesostructures in the Course of Developed Plastic Deformation,” Vopr. Materialoved., No. 1, 11–33 (2002).
E. H. Lee, “Elastic-Plastic Deformation at Finite Strains,” Trans. ASME, J. Appl. Mech. 36(1), 1–6 (1969).
V. I. Levitas, Large Elastoplastic Deformations of Materials at a High Pressure (Naukova Dumka, Kiev, 1987) [in Russian].
G. I. Bykovtsev and A. I. Shitikov, “Finite Deformations of Elastoplastic Media,” Dokl. Akad. Nauk SSSR 311(1), 59–62 (1990).
V. P. Myasnikov, “ Equations of Motion of Elastoplastic Materials with Large Deformations,” Vestn. Dal’nevost. Otd. Ross. Akad. Nauk, No. 4, 8–13 (1996).
L. V. Kovtanyuk, Mathematical Model of Large Elastopalstic Deformations and the Formation of Residual Stress Fields in the Vicinity of Material Inhomogeneities (Vladivostok, 2006) [in Russian].
V. M. Greshnov and R. I. Shaikhutdinov, “Physico-Phenomenological Model of Dislocation Creep of Metals,” Vestn. Ufim. Gos. Aviats. Tekh. Univ. 17(1), 33–38 (2013).
V. M. Greshnov and I. V. Puchkova, “On the Theory of Plastic Structure Formation of Metals,” Prikl. Mekh. Tekh. Fiz. 56(3), 200–212 (2015) [J. Appl. Mech. Tech. Phys. 56 (3), 519–529 (2015)]; DOI: https://doi.org/10.1134/S0021894415030232.
V. M. Greshnov, R. I. Shaikhutdinov, and I. V. Puchkova, “Kinetic Physical Phenomenological Model of Creep-Rupture Strength of Metals,” Prikl. Mekh. Tekh. Fiz. 58(1), 189–198 (2017) [J. Appl. Mech. Tech. Phys. 58 (1), 165–172 (2017)]; DOI: https://doi.org/10.1134/S0021894417010187.
V. M. Greshnov, “Physical-Mathematical Theory of Irreversible Strains in Metals,” Mech. Solids 46(4), 544–553 (2011); DOI: https://doi.org/10.3103/s0025654411040054.
V. M. Greshnov, Physical-Mathematical Theory of Large Irreversible Deformations of Metals (Fizmatlit, Moscow, 2018) [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.M. Greshnov.
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 60, No. 5, pp. 156–160, September–October, 2019.
Rights and permissions
About this article
Cite this article
Greshnov, V.M. Theory of Large Deformations of Metals. J Appl Mech Tech Phy 60, 916–919 (2019). https://doi.org/10.1134/S0021894419050158
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894419050158