Abstract
A simplified two-dimensional model of an overlap adhesive joint is proposed. The problem of a stress state of an adhesive joint, along the surfaces of which unadhered regions are located, is solved analytically under the assumption that the cross-sectional displacements of carrier layers vanish. The resulting solution is a functional series, with eigenfunctions being nonorthogonal. It is shown that the presence of unadhered regions may significantly increase stresses near the edge of the adherend.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
L. F. M. da Silva, P. J. C. das Neves, R. D. Adams, and J. K. Spelt, “Analytical Models of Adhesively Bonded Joints. 1. Literature Survey,” Int. J. Adhes. Adhesiv. 29, 319–330 (2009).
N. G. Ryabenkov and Yu. P. Artyukhin, “Determining Adhesive Stresses in a Joint of Two Semi-Infinite Plates,” Issled. Teor. Plastin Obolochek 16, 82–90 (1981).
P. Rapp, “Mechanics of Adhesive Joints As a Plane Problem of the Theory of Elasticity. 2. Displacement Formulation for Orthotropic Adherends,” Arch. Civil Mech. Eng. 15 (2), 603–619 (2015).
A. Barut, J. Hanauska, E. Madenci, and D. R. Ambur, “Analysis Method for Bonded Patch Repair of a Skin with a Cutout,” Compos. Struct. 55, 277–294 (2002).
A. Chukwujekwu Okafor, N. Singh, U. E. Enemuoh, and S. V. Rao, “Design, Analysis and Performance of Adhesively Bonded Composite Patch Repair of Cracked Aluminum Aircraft Panels,” Compos. Struct. 71, 258–270 (2005).
S. S. Kurennov, “A Simplified Two-Dimensional Model of Adhesive Joints. Nonuniform Load,” Mech. Composite Mater. 51 (4), 479–488 (2015).
S. S. Kurennov and E. V. Tanchik, “Calculation of the Stress State of an Adhesive Joint of Rectangular Plates of a Varying Width,” Vestn. Mosk. Aviats. Inst. 22 (2), 162–169 (2015).
S. S. Kurennov, “Stress State of Plates of a Varying Width. Approximate Theory and Experiment,” Visnik Zaporizkogo Nats. Univ., No. 1, 235–244 (2017).
V. V. Vasil’ev and Yu. V. Bokov, “Study of the Stress State of an Adhesive Joint of a Composite Material with a Metal Sheet,” in Design, Calculation, and Testing of Structures Made of Composite Materials, Vol. 7 (Central Aerohydrodynamic Institute, Moscow, 1979) [in Russian].
V. V. Vasil’ev and S. A. Lur’e, “Singularity in the Solution of a Plane Problem of the Elasticity Theory for a Cantilever Strip,” Izv. Ross. Akad. Nauk, Mekh. Tv. Tela, No. 4, 40–49 (2013).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.S. Kurennov.
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 60, No. 4, pp. 174–182, July–August, 2019.
Rights and permissions
About this article
Cite this article
Kurennov, S.S. Determining Stresses in an Adhesive Joint with a Longitudinal Unadhered Region Using a Simplified Two-Dimensional Theory. J Appl Mech Tech Phy 60, 740–747 (2019). https://doi.org/10.1134/S0021894419040199
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894419040199