Abstract
The lattice Boltzmann method is employed to simulate heat transfer in the flow past three arrangements of elliptical and circular cylinders under an isothermal boundary condition. The lattice Boltzmann equations and the Bhatnagar–Gross–Krook model are used to simulate two-dimensional forced convection at 30 ≤ Re ≤ 100 and Pr = 0.71. Pressure distributions, isotherms, and streamlines are obtained. Vortex shedding maps are observed in detail for several cases. The present results are in good agreement with available experimental and numerical data.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
R. Mittal and S. Balachandar, “Direct Numerical Simulation of Flow Past Elliptic Cylinders,” J. Comput. Phys. 124, 351–367 (1996).
B. Sharman, F. S. Lien, L. Davidson, and C. Norberg, “Numerical Predictions of Low Reynolds Number Flows over Two Tandem Circular Cylinders,” Int. J. Numer. Methods Fluids 47, 423–447 (2005).
D. Arumuga Perumal, G. V. S. Kumar, and A. K. Dass, “Lattice Boltzmann Simulation of Viscous Flow Past Elliptical Cylinder,” J. CFD Lett. 4, 127–139 (2012).
K. Shintani, A. Umemura, and A. Takano, “Low-Reynolds-Number Flow Past an Elliptic Cylinder,” J. Fluid Mech. 136, 277–289 (1983).
F. J. Higuera and J. Jimenez, “Boltzmann Approach to Lattice Gas Simulation,” Europhys. Lett. 9, 663–668 (1989).
F. Massaioli, R. Benzi, and S. Succi, “Exponential Tails in Two-Dimensional Rayleigh–Be’nard Convection,” Europhys. Lett. 21, 305–310 (1993).
Y. Chen, H. Ohashi, and M. A. Akiyama, “Thermal Lattice Bhatnagar–Gross–Krook Model without Nonlinear Deviations in Macro Dynamic Equations,” Phys. Rev. E 50, 2776–2783 (1994).
P. Pavlo, G. Vahala, L. Vahala, and M. Soe, “Linear-Stability Analysis of Thermo-Lattice Boltzmann Models,” J. Comput. Phys. 139, 79–91 (1998).
B. Crouse, M. Krafczyk, S. Kuhner, et al., “Indoor Air Flow Analysis Based on Lattice Boltzmann Methods,” Energy Build 34, 941–949 (2002).
A. D’Orazio, M. Corcione, and G. P. Cielata, “Application to Natural Convection Enclosed Flows of a Lattice Boltzmann BGK Model Coupled with a General Purpose Thermal Boundary Condition,” Int. J. Thermal Sci. 43, 575–586 (2004).
A. Korichi and L. Oufer, “Numerical Heat Transfer in a Rectangular Channel with Mounted Obstacles on the Upper and Lower Walls,” Int. J. Thermal Sci. 44, 644–655 (2005).
G. Juncu, “A Numerical Study of Momentum and Forced Convection Heat Transfer Around Two Tandem Circular Cylinders at Low Reynolds Numbers. Pt 2. Forced Convection Heat Transfer,” Int. J. Heat Mass Transfer 50, 3799–3808 (2007).
M. Farhadi, K. Sedighi, and M. M. Madani, “Convective Cooling of Tandem Heated Squares in a Channel,” J. Mech. Eng. Sci. 223, 965–978 (2009).
M. Mohammadi Pirouz, M. Farhadi, K. Sedighi, et al., “Lattice Boltzmann Simulation of Conjugate Heat Transfer in a Rectangular Channel with Wall-Mounted Obstacles,” J. Sci. Iranica B 18, 213–222 (2011).
B. Chopard and P. O. Luthi, “Lattice Boltzmann Computations and Applications to Physics,” Theoret. Comput. Phys. 217, 115–130 (1999).
R. R. Nourgaliev, T. N. Dinh, T. G. Theofanous, and D. Joseph, “The Lattice Boltzmann Equation Method: Theoretical Interpretation, Numerics and Implications,” Int. J. Multiphase Flow 29, 117–169 (2003).
D. Yu, R. Mei, L. S. Luo, and W. Shyy, “Viscous Flow Computations with the Method of Lattice Boltzmann Equation,” Progr. Aerospace Sci. 39, 329–367 (2003).
A. A. Mohammad, Applied Lattice Boltzmann Method for Transport Phenomena Momentum Heat Mass Transfer (Univ. Calgary Press, Calgary, 2007).
D. M. Aghajani, M. Farhadi, and K. Sedighi, “Effect of Heater Location on Heat Transfer and Entropy Generation in the Cavity Using the Lattice Boltzmann Method,” Heat Transfer Res. 40, 521–536 (2009).
A. Mezrhab, M. Jami, C. Abid, et al., “Lattice Boltzmann Modeling of Natural Convection in an Inclined Square Enclosure with Partitions Attached to its Cold Wall,” Int. J. Heat Fluid Flow 27, 456–465 (2006).
X. He and L. S. Luo, “Lattice Boltzmann Model for the Incompressible Navier–Stokes Equations,” J. Statist. Phys. 88, 927–944 (1997).
N. Thürey and U. Rüde, “Stable Free Surface Flows with the Lattice Boltzmann Method on Adaptively Coarsened Grids,” Comput. Visual. Sci. 12, 247–263 (2009).
Z. L. Guo, Ch. Zheng, and B. C. Shi, “An Extrapolation Method for Boundary Conditions in Lattice Boltzmann Method,” Phys. Fluids 14 (6), 2007–2010 (2002).
J. Park, K. Kwon, and H. Choi, “Numerical Solutions of Flow Past a Circular Cylinder at Reynolds Number up to 160,” KSME Int. J. 12, 1200 (1998).
D. Sucker and H. Brauer, “Fluiddynamikbei der Angestromten Zilindern,” Wärmeund Stoffübertrag 8, 149 (1975).
W. A. Khan, J. R. Culham, and M. M. Yovanovich, “Fluid Flow Around and Heat Transfer from Elliptical Cylinders: Analytical Approach,” J. Thermophys. Heat Transfer 19, 178–185 (2005).
J. Hoffman, “Efficient Computation of Mean Drag for the Subcritical Flow Past a Circular Cylinder using General Galerkin G2,” Int. J. Numer. Methods Fluids 59 (11), 1241–1258 (2009).
C. Von Wieselsberger, “Neuere Festellungen über die Gesetze des Flüssigkeits un Luftwiderstands,” Phys. Z. 22, 321–328 (1921).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © J. Alinejad.
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 57, No. 1, pp. 136–145, January–February, 2016. Original article submitted January 10, 2013; revision submitted January 24, 2014.
Rights and permissions
About this article
Cite this article
Alinejad, J. Lattice Boltzmann simulation of a fluid flow around a triangular unit of three isothermal cylinders. J Appl Mech Tech Phy 57, 117–126 (2016). https://doi.org/10.1134/S0021894416010132
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894416010132