Abstract
Cavity-based large scale quantum information processing (QIP) may involve multiple cavities and require performing various quantum logic operations on qubits distributed in different cavities. Geometric-phase-based quantum computing has drawn much attention recently, which offers advantages against inaccuracies and local fluctuations. In addition, multiqubit gates are particularly appealing and play important roles in QIP. We here present a simple and efficient scheme for realizing a multi-target-qubit unconventional geometric phase gate in a multi-cavity system. This multiqubit phase gate has a common control qubit but different target qubits distributed in different cavities, which can be achieved using a single-step operation. The gate operation time is independent of the number of qubits and only two levels for each qubit are needed. This multiqubit gate is generic, e.g., by performing single-qubit operations, it can be converted into two types of significant multi-target-qubit phase gates useful in QIP. The proposal is quite general, which can be used to accomplish the same task for a general type of qubits such as atoms, NV centers, quantum dots and superconducting qubits.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Introduction
Multiqubit gates are particularly appealing and have been considered as an attractive building block for quantum information processing (QIP). In parallel to Shor algorithm1, Grover/Long algorithm2,3, quantum simulations, such as analogue quantum simulation4 and digital quantum simulation5, are also important QIP tasks where controlled quantum gates play important roles. There exist two kinds of significant multiqubit gates, i.e., multiqubit gates with multiple control qubits acting on a single target qubit6,7,8,9,10,11,12,13,14 and multiqubit gates with a single qubit simultaneously controlling multiple target qubits15,16,17. These two kinds of multiqubit gates have many applications in QIP such as quantum algorithms1,18,19,20, quantum Fourier transform19, error correction21,22,23, quantum cloning24 and entanglement preparation25.
A multiqubit gate can in principle be constructed by using single-qubit and two-qubit basic gates. However, when using the conventional gate-decomposition protocols to construct a multiqubit gate26,27,28, the number of basic gates increases and the procedure usually becomes complicated as the number of qubits increases. Hence, building a multiqubit gate may become very difficult since each basic gate requires turning on and off a given Hamiltonian for a certain period of time and each additional basic gate adds experimental complications and the possibility of more errors. Thus, the study of reducing the operation time and the number of switching Hamiltonians is crucial in multiqubit gates29,30,31. Proposals have been presented for directly realizing both multi-control-qubit gates6,7,8,9,10,11,12,13,14 and multi-target-qubit gates15,16,17 in various physical systems. However, note that the gate implementation using these previous proposals6,7,8,9,10,11,12,13,14,15,16,17 was based on non-geometric dynamical evolution.
During the past years, there is much interest in fault-tolerant geometric quantum computing based on Abelian geometric phases32,33,34,35 and Holonomic quantum computing based on non-Abelian holonomies36. The construction of conventional geometric phase gates usually requires to remove the dynamical phase by choosing the adiabatic cyclic evolution37 or employing multi-loop schemes (the evolution is driven by a Hamiltonian along several closed loops)38,39. In recent years, attention has been shifted to unconventional geometric phases introduced in40, which can be used as an alternative resource for geometric quantum computation without the need to remove the dynamic phase. According to40, an unconventional geometric phase gate is characterized by a unitary operator U({γ}), where γ is the total phase, which consists of a geometric phase and a dynamic phase (see40). Thus, additional operations are not needed to cancel the dynamical phase, because the total phase is dependent only on global geometric features and independent of initial states of the system. In this paper, we mainly focus on the construction of multiqubit gates based on unconventional geometric phases.
A number of proposals have been presented for realizing both conventional and unconventional geometric phase gates37,38,39,40,41,42,43,44,45,46,47,48,49,50,51. Some approaches also combine the geometric computation with other theories in order to improve the robustness (e.g., combined with decoherence free subspace or dynamical decoupling)50,51. Moreover, high-fidelity geometric phase gates have been experimentally demonstrated in several physical systems52,53,54,55,56,57. For instances, Jones et al.52 experimentally demonstrated a conditional Berry phase shift gate using NMR and Leibfried et al.53 realized a two-qubit geometric phase gate in a trapped ion system. On the other hand, much progress has been achieved in Holonomic quantum computing. Experimentally, Abdumalikov Jr et al.54 realized single-qubit Holonomic gates in a superconducting transmon, Feng et al.55 implemented one-qubit and two-qubit Holonomic gates in a liquid-state NMR quantum information processor and two groups56,57 demonstrated single-qubit or two-qubit Holonomic gates using the NV centers at room temperature, respectively. However, we note that previous works mainly focus on constructing single- or two-qubit geometric phase gates/Holonomic gates37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57, or implementing a multi-control-qubit gate6,7,8,9,10,11,12,13,14 and a multi-target-qubit gate15,16,17 based on non-geometric dynamical evolution.
In this work, we consider how to implement a multi-target-qubit unconventional geometric phase gate, which is described by the following transformation:
where subscript A represents a control qubit, subscripts (1, 2, ..., n) represent n target qubits (1, 2, ..., n) and (with ij ∈ {+, −}) is the n-target-qubit computational basis state. For n target qubits, there are a total number of 2n computational basis states, which form a set of complete orthogonal bases in a 2n-dimensional Hilbert space of the n qubits. Equation (1) shows that when the control qubit A is in the state , a phase shift happens to the state but nothing happens to the state of the target qubit j (j = 1, 2, ..., n). For instance, under the transformation (1), one has: (i) the state transformation described by following Eq. (18) for a two-qubit phase gate on control qubit A and target qubit j and (ii) the state transformation described by Eq. (21) below for a three-qubit phase gate on control qubit A and two target qubits (1, 2). Note that the multiqubit phase gate described by Eq. (1) is equivalent to such n two-qubit phase gates, i.e., each of them has a common control qubit A but a different target qubit 1, 2, ..., or n and the two-qubit phase gate acting on the control qubit A and the target qubit j (j = 1, 2, ..., n) is described by Eq. (18).
The multiqubit gate described by Eq. (1) is generic. For example, by performing a single-qubit operation such that and but nothing to and the transformation (1) becomes
which implies that when and only when the control qubit A is in the state , a phase shift happens to the state of the target qubit j but nothing otherwise (see Fig. 1). For θj = π/2, the state transformation (2) corresponds to a multi-target-qubit phase gate, i.e., if and only if the control qubit A is in the state , a phase flip from the sign + to − occurs to the state of each target qubit. Note that a CNOT gate of one qubit simultaneously controlling n qubits, (see Fig. 1(b) in15), can also be achieved using this multiqubit phase gate combined with two Hadamard gates on the control qubit15. Such a multiqubit phase or CNOT gate is useful in QIP. For instance, this multiqubit gate is an essential ingredient for implementation of quantum algorithm (e.g., the discrete cosine transform20), the gate plays a key role in quantum cloning24 and error correction23 and it can be used to generate multiqubit entangled states such as Greenberger-Horne-Zeilinger states25. This multiqubit gate can be combined with a set of universal single- or two-qubit quantum gates to construct quantum circuits for implementing quantum information processing tasks20,23,24,25. In addition, for θj = π/2j, the state transformation (2) corresponds to a multi-target-qubit phase gate, i.e., if and only if the control qubit A is in the state , a phase shift θj = π/2j happens to the state of each target qubit. It is noted that this multi-target-qubit gate is equivalent to a multiqubit gate with different control qubits acting on the same target qubit (see Fig. 2), which is a key element in quantum Fourier transform1,19.
In what follows, our goal is propose a simple method for implementing a generic unconventional geometric (UG) multi-target-qubit gate described by Eq. (1), with one qubit (qubit A) simultaneously controlling n target qubits (1, 2, ..., n) distributed in n cavities (1, 2, ..., n). We believe that this work is also of interest from the following point of view. Large-scale QIP usually involves a number of qubits. Placing many qubits in a single cavity may cause some fundamental problems such as introducing the unwanted qubit-qubit interaction, increasing the cavity decay and decreasing the qubit-cavity coupling strength. In this sense, large-scale QIP may need to place qubits in multiple cavities and thus require performing various quantum logic operations on qubits distributed in different cavities. Hence, it is important and imperative to explore how to realize multiqubit gates performed on qubits that are spatially-separated and distributed in different cavities.
As shown below, this proposal has the following features and advantages: (i) The gate operation time is independent of the number of qubits; (ii) The proposed multi-target-qubit UG phase gate can be implemented using a single-step operation; (iii) Only two levels are needed for each qubit, i.e., no auxiliary levels are used for the state coherent manipulation; (iv) The proposal is quite general and can be applied to accomplish the same task with a general types of qubits such as atoms, superconducting qubits, quantum dots and NV centers. To the best of our knowledge, this proposal is the first one to demonstrate that a multi-target-qubit UG phase gate described by (1) can be achieved with one qubit simultaneously controlling n target qubits distributed in n cavities.
In this work we will also discuss possible experimental implementation of our proposal and numerically calculate the operational fidelity for a three-qubit gate, by using a setup of two superconducting transmission line resonators each hosting a transmon qubit and coupled to a coupler transmon qubit. Our numerical simulation shows that highly-fidelity implementation of a three-qubit (i.e., two-target-qubit) UG phase gate by using this proposal is feasible with rapid development of circuit QED technique.
Results
Model and Hamiltonian
Consider a system consisting of n cavities each hosting a qubit and coupled to a common qubit A [Fig. 3(a)]. The coupling and decoupling of each qubit from its cavity can be achieved by prior adjustment of the qubit level spacings. For instance, the level spacings of superconducting qubits can be rapidly adjusted by varying external control parameters (e.g., magnetic flux applied to the superconducting loop of a superconducting phase, transmon, Xmon or flux qubit; see, e.g.58,59,60,61); the level spacings of NV centers can be readily adjusted by changing the external magnetic field applied along the crystalline axis of each NV center62,63; and the level spacings of atoms/quantum dots can be adjusted by changing the voltage on the electrodes around each atom/quantum dot64. The two levels of coupler qubit A are denoted as and while those of intracavity qubit j as and (j = 1, 2, ···, n). A classical pulse is applied to qubit A and each intracavity qubit j [Fig. 3(b,c)]. For identical qubits, we have , where ω is the pulse frequency and is the transition frequency of qubit A (qubit j). The system Hamiltonian in the interaction picture reads (in units of ħ = 1)
where is the photon creation operator for the mode of cavity j, and are the raising and lowering operators for qubit A (qubit j), and are detunings (with being the frequency of cavity j), Ω is the Rabi frequency of the pulse applied to each qubit, (gj) is the coupling constant of qubit A (j) with cavity j. We choose and as the rotated basis states of qubit j and qubit A, respectively.
In a rotated basis , one has and , where , and . Here, l = 1, 2, 3, ···n, A. Hence, the Hamiltonian (3) can be expressed as
In a new interaction picture under the Hamiltonian , one obtains from Eq. (4)
In the strong driving regime , one can apply a rotating-wave approximation and eliminate the terms that oscillate with high frequencies. Thus, the Hamiltonian (5) becomes
For simplicity, we set
The first term of condition (7) can be achieved by adjusting the position of qubit j in cavity j and second term can be met for identical qubits. Thus, the Hamiltonian (6) changes to
with
where is the effective Hamiltonian of a subsystem, which consists of qubit A, intracavity qubit j and cavity j. In the next section, we first show how to use the Hamiltonian (9) to construct a two-qubit UG phase gate with qubit A controlling the target qubit j. We then discuss how to use the effective Hamiltonian (8) to construct a multi-qubit UG phase gate with qubit A simultaneously controlling n target qubits distributed in n cavities.
Implementing multiqubit UG phase gates
Consider a system consisting of the coupler qubit A and an intracavity qubit j, for which are eigenstates of the operator with eigenvalues ±1. In the rotated basis , the Hamiltonian (9) can be rewritten as
and thus the time evolution operator UAj(t) corresponding to the Hamiltonian can be expressed as
where and are given by
with
where pp ∈ {++, − −}, p ∈ {+, −}, ε++ = −ε−− = 1, D is the displacement operator (for details, see Methods below), is the time ordering operator and Δτ = t/N is the time interval. From Eq. (12) and Eq. (31) below, one obtains and . Thus, one has
where Tj is the evolution time required to complete a closed path.
If t = Tj is equal to 2mjπ/|δj| with a positive integer mj, we have ∫cαpp,j = 0 according to Eq. (14), which shows that when cavity j is initially in the vacuum state, then cavity j returns to its initial vacuum state after the time evolution completing a closed path. Thus, it follows from Eq. (12) that we have
Here θpp,j is the total phase given by Eq. (14), which is acquired during the time evolution from t = 0 to t = Tj. Note that θpp,j consists of a geometric phase and a dynamical phase.
It follows from Eqs (11) and (15) that the cyclic evolution is described by
Eq. (14) shows that θpp,j is independent of index pp. Thus, we have θ++,j = θ−−,j ≡ θj. Further, according to Eq. (14), after an integration for Tj = 2mjπ/|δj| (set above), we have
which can be adjusted by varying the coupling strength gj and detuning δj. Note that a negative detuning δj < 0 [see Fig. 3(b,c)] has applied to the last equality of Eq. (17). The unitary operator (16) describes a two-qubit UG phase gate operation. For θj ≠ 2nπ with an integer n, the phase gate is nontrivial. After returning to the original interaction picture by performing a unitary transformation , we obtain the following state transformations: and , which can be further written as
where we have set ΩTj = kπ (k is a positive integer). For Tj = 2mjπ/|δj|, we have 2Ω = k|δj|/mj. The result (18) shows that a two-qubit UG phase gate was achieved after a single-step operation described above.
Now we expand the above procedure to a multiqubit case. Consider qubit A and n qubits (1, 2, ···, n) distributed in n cavities [Fig. 3(a)]. From Eqs (8) and (9), one can see that: (i) each term of Heff acts on a different intra-cavity qubit but the same coupler qubit A and (ii) any two terms of Heff, corresponding to different j, commute with each other: . Thus, it is straightforward to show that the cyclic evolution of the cavity-qubit system is described by the following unitary operator
where UAj(Tj) is the unitary operator given in Eq. (16), which characterizes the cyclic evolution of a two-qubit subsystem (i.e., qubit A and intracavity qubit j) in the rotated basis and .
By changing the detunings δj (e.g., via prior design of cavity j with an appropriate frequency), one can have
which leads to T1 = T2 = , ···, = Tn ≡ T, i.e., the evolution time for each of qubit pairs (A, 1), (A, 2), ··· and (A, n) to complete a cyclic evolution is identical. For the setting here, we have resulting from Eq. (17). Hence, one can easily find from Eqs (18) and (19) that after a common evolution time T, the n two-qubit UG phase gates characterized by a jointed unitary operator U(T) of Eq. (19), which have a common control qubit A but different target qubits (1, 2, ..., n), are simultaneously implemented. As discussed in the introduction, the n two-qubit UG phase gates here are equivalent to a multiqubit UG phase gate described by Eq. (1). Hence, after the above operation, the proposed multiqubit UG phase gate is realized with coupler qubit A (control qubit) simultaneously controlling n target qubits (1, 2, ···, n) distributed in n cavities.
To see the above more clearly, consider implementing a three-qubit (two-target-qubit) UG phase gate. For three qubits, there are a total number of eight computational basis states, denoted by . According to Eqs (18) and (19), one can obtain a three-qubit UG phase gate, which is described by
As discussed in the introduction, by applying single-qubit operations, this three-qubit UG phase gate described by Eq. (21) can be converted into a three-qubit phase gate which is illustrated in the above-mentioned Fig. 1 or Fig. 2 for n = 2. In the next section, as an example, we will give a discussion on the experimental implementation of this three-qubit UG phase gate for the case of θ1 = θ2 = π/2. Based on Eq. (17) and for T1 = T2 (see above), one can see that the θ1 = θ2 corresponds to , which can be met by adjusting gj (e.g., varying the position of qubit j in cavity j) or detuning δj (e.g., prior adjustment of the frequency of cavity j) (j = 1, 2).
Possible experimental implementation
Superconducting qubits are important in QIP due to their ready fabrication, controllability and potential scalability58,65,66,67,68,69. Circuit QED is analogue of cavity QED with solid-state devices coupled to a microwave cavity on a chip and is considered as one of the most promising candidates for QIP65,66,67,68,69,70,71,72. In above, a general type of qubit, for both of the intracavity qubits and the coupler qubit, is considered. As an example of experimental implementation, let us now consider each qubit as a superconducting transmon qubit and each cavity as a one-dimensional transmission line resonator (TLR). We consider a setup in Fig. 4 for achieving a three-qubit UG phase gate. To be more realistic, we consider a third higher level of each transmon qubit during the entire operation because this level may be excited due to the transition induced by the cavity mode(s), which will affect the operation fidelity. From now on, each qubit is renamed “qutrit” since the three levels are considered.
When the intercavity crosstalk coupling and the unwanted transition of each qutrit are considered, the Hamiltonian (3) is modified as follows
where HI is the needed interaction Hamiltonian in Eq. (3) for n = 2, while ΘI is the unwanted interaction Hamiltonian, given by
where and The first term describes the unwanted off-resonant coupling between cavity j and the transition of qutrit j, with coupling constant and detuning [Fig. 5(a,b)], while the second term is the unwanted off-resonant coupling between cavity j and the transition of qutrit A, with coupling constant and detuning [Fig. 5(c)]. The third term of Eq. (23) describes the intercavity crosstalk between the two cavities, where is the detuning between the two-cavity frequencies and g12 is the intercavity coupling strength between the two cavities. The last two terms of Eq. (23) describe unwanted off-resonant couplings between the pulse and the transition of each qutrit, where is the pulse Rabi frequency. Note that the Hamiltonian (23) does not involves transition of each qutrit, since this transition is negligible because of (j = 1, 2) (Fig. 5).
When the dissipation and dephasing are included, the dynamics of the lossy system is determined by the following master equation
where and with Here, κj is the photon decay rate of cavity j (j = 1, 2). In addition, Γl is the energy relaxation rate of the level of qutrit l, is the energy relaxation rate of the level of qutrit l for the decay path and Γl,φ e (Γl,φf) is the dephasing rate of the level of qutrit l (l = 1, 2, A).
The fidelity of the operation is given by
where is the output state of an ideal system (i.e., without dissipation, dephasing and crosstalk considered), while ρ is the final density operator of the system when the operation is performed in a realistic physical system. As an example, we consider that qutrit l is initially in a superposition state (l = 1, 2, A) and cavity 1 (2) is initially in the vacuum state. In this case, we have , where
which is obtained based on Eq. (21) and for θ1 = θ2 = π/2.
We now numerically calculate the fidelity of the gate operation. Without loss of generality, consider identical transmon qutrits and cavities. Setting m1 = 1 and m2 = 2, we have δ2 = 2δ1 because of Eq. (20), which corresponds to for θ1 = θ2. In order to satisfy the relation 2Ω ≫ |δ2| and 2Ω = k|δ2|/2, we set k = 18. In addition, we have , (j = 1, 2) and for the transmon qutrits73. For a transmon qutrit, the anharmonicity α/2π = 720 MHZ between the transition frequency and the transition frequency is readily achieved in experiments74. Thus, we set MHz and MHz (j = 1, 2). For transmon qutrits, the typical transition frequency between two neighbor levels is between 4 and 10 GHz75,76. Therefore, we choose GHz. Other parameters used in the numerical calculation are as follows: μs, μs, μs, μs, μs (l = 1, 2, A) and μs (j = 1, 2). It is noted that for a transmon qutrit, the dipole matrix element is much smaller than that of the and transitions. Thus, .
To test how the inter-cavity crosstalk affects the gate fidelity, we plot Fig. 6 for g12 = 0, 0.01g1, 0.1g1, which shows the fidelity versus δ1/2π. For simplicity, the dissipation and dephasing of the system are not considered in Fig. 6. As depicted in Fig. 6, the effect of the inter-cavity coupling is negligible as long as g12 ≤ 0.01g1.
Figure 7 shows the fidelity versus δ1/2π, which is plotted by setting g12 = 0.01g1 and now taking the systematic dissipation and dephasing into account. From Fig. 7, one can see that for δ1/2π ≈ −1.8 MHz, a high fidelity ~99.1% is achievable for a three-qubit UG phase gate. For δ1/2π ≈ −1.8 MHz, we have T = T1 = T2 = 0.556 μs, g1/2π = 0.9 MHz and g2/2π = 1.273 MHz. The values of g1 and g2 here are readily available in experiments77.
The condition g12 = 0.01g1 is easy to satisfy with the cavity-qutrit capacitive coupling shown in Fig. 4. When the cavities are physically well separated, the inter-cavity crosstalk strength is , where CΣ = C1 + C2 + Cq (Cq is the qutrit’s self-capacitance)78,79. For C1, C2~ 1 fF and CΣ~ 100 fF (typical values in experiments), one has g12 ~ 0.01g1. Thus, the condition g12 = 0.01g1 is readily achievable in experiments.
Energy relaxation time T1 and dephasing time T2 of the level can be made to be on the order of 55–60 μs for state-of-the-art transom devices coupled to a one-dimensional TLR80 and the order of 20–80 μs for a transom coupled to a three-dimensional microwave resonator81,82. For transmon qutrits, we have the energy relaxation time and dephasing time of the level which are comparable to T1 and T2, respectively. With GHz chosen above, we have ωc1/2π ~ 6.5018 GHz and ωc2/2π ~ 6.5009 GHz. For the cavity frequencies here and the values of and used in the numerical calculation, the required quality factors for the two cavities are Q1 ~ 1.2249 × 106 and Q2 ~ 1.2247 × 106. Note that superconducting coplanar waveguide resonators with a loaded quality factor Q ~ 106 were experimentally demonstrated83,84 and planar superconducting resonators with internal quality factors above one million (Q > 107) have also been reported85. We have numerically simulated a three-qubit circuit QED system, which shows that the high-fidelity implementation of a three-qubit UG phase gate is feasible with rapid development of circuit QED technique.
Discussion
A simple method has been presented to realize a generic unconventional geometric phase gate of one qubit simultaneously controlling n spatially-separated target qubits in circuit QED. As shown above, the gate operation time is independent of the number n of qubits. In addition, only a single step of operation is needed and it is unnecessary to employ three-level or four-level qubits and not required to eliminate the dynamical phase, therefore the operation is greatly simplified and the experimental difficulty is significantly reduced. Our numerical simulation shows that highly-fidelity implementation of a two-target-qubit unconventional geometric phase gate by using this proposal is feasible with rapid development of circuit QED technique. The proposed multiqubit gate is generic, which, for example, can be converted into two types of important multi-target-qubit phase gates useful in QIP. This proposal is quite general and can be applied to accomplish the same task with various types of qubits such as atoms, quantum dots, superconducting qubits and NV centers.
Methods
Geometric phase
Geometric phase is induced due to a displacement operator along an arbitrary path in phase space86,87. The displacement operator is expressed as
where a† and a are the creation and annihilation operators of an harmonic oscillator, respectively. The displacement operators satisfy
For a path consisting of N short straight sections Δαj, the total operator is
An arbitrary path c can be approached in the limit N → ∞. Therefore, Eq. (29) can be rewritten as
with
For a closed path, we have
where Θ is the total phase which consists of a geometric phase and a dynamical phase35. In above, equations (27, 28, 29, 30, 31, 32) have been adopted for realizing an UG phase gate of one qubit simultaneously controlling n target qubits.
Additional Information
How to cite this article: Liu, T. et al. Multi-target-qubit unconventional geometric phase gate in a multi-cavity system. Sci. Rep. 6, 21562; doi: 10.1038/srep21562 (2016).
References
Shor, P. W. In Proceedings of the 35th annual symposium on foundations of computer science, edited by S. Goldwasser (IEEE Computer Society Press, Los Alamitos, CA), pp. 124–134 (1994).
Grover, L. K. Quantum mechanics helps in searching for a needle in a haystack. Phys. Rev. Lett. 79, 325–328 (1997).
Long, G. L. Grover algorithm with zero theoretical failure rate. Phys. Rev. A 64, 022307 (2001).
Tseng, C. H. et al. Quantum simulation of a three-body-interaction Hamiltonian on an NMR quantum computer. Phys. Rev. A 61, 012302 (1999).
Feng, G. R., Lu, Y., Hao, L., Zhang, F. H. & Long, G. L. Experimental simulation of quantum tunneling in small systems. Sci. Rep . 3, 2232 (2013).
Duan, L. M., Wang, B. & Kimble, H. J. Robust quantum gates on neutral atoms with cavity-assisted photon-scattering. Phys. Rev. A 72, 032333 (2005).
Wang, X., Sø rensen, A. & Mø lmeret, K. Multibit gates for quantum computing. Phys. Rev. Lett. 86, 3907–3910 (2001).
Zou, X., Dong, Y. & Guo, G. C. Implementing a conditional z gate by a combination of resonant interaction and quantum interference. Phys. Rev. A 74, 032325 (2006).
Yang, C. P. & Han, S. n-qubit-controlled phase gate with superconducting quantum-interference devices coupled to a resonator. Phys. Rev. A 72, 032311 (2005).
Yang, C. P. & Han, S. Realization of an n-qubit controlled-U gate with superconducting quantum interference devices or atoms in cavity QED. Phys. Rev. A 73, 032317 (2006).
Monz, T. et al. Realization of the quantum Toffoli gate with trapped ions. Phys. Rev. Lett. 102, 040501 (2009).
Jones, C. Composite Toffoli gate with two-round error detection. Phys. Rev. A 87, 052334 (2013).
Wei, H. R. & Deng, F. G. Universal quantum gates for hybrid systems assisted by quantum dots inside double-sided optical microcavities. Phys. Rev. A 87, 022305 (2013).
Wei, H. R. & Deng, F. G. Scalable quantum computing based on stationary spin qubits in coupled quantum dots inside double-sided optical microcavities. Sci. Rep . 4, 7551 (2014).
Yang, C. P., Liu, Y. X. & Nori, F. Phase gate of one qubit simultaneously controlling n qubits in a cavity. Phys. Rev. A 81, 062323 (2010).
Yang, C. P., Zheng, S. B. & Nori, F. Multiqubit tunable phase gate of one qubit simultaneously controlling n qubits in a cavity. Phys. Rev. A 82, 062326 (2010).
Yang, C. P., Su, Q. P., Zhang, F. Y. & Zheng, S. B. Single-step implementation of a multiple-target-qubit controlled phase gate without need of classical pulses. Opt. Lett. 39, 3312–3315 (2014).
Grover, L. K. Quantum computers can search rapidly by using almost any transformation. Phys. Rev. Lett. 80, 4329–4332 (1998).
Nilsen, M. A. & Chuang, I. L. Quantum computation and quantum information (Cambridge University Press, Cambridge, 2000), Ch. 5, pp. 217–220.
Beth, T. & Rötteler, M. Quantum Information (Springer, Berlin), Vol. 173, Ch. 4, p. 96 (2001).
Shor, P. W. Scheme for reducing decoherence in quantum computer memory. Phys. Rev. A 52, R2493–R2496 (1995).
Steane, A. M. Error correcting codes in quantum theory. Phys. Rev. Lett. 77, 793–797 (1996).
Gaitan, F. Quantum error correction and fault tolerant quantum computing (CRC Press, USA), pp. 1–312 (2008).
Braunstein, S. L., Bužek, V. & Hillery, M. Quantum-information distributors: quantum network for symmetric and asymmetric cloning in arbitrary dimension and continuous limit. Phys. Rev. A 63, 052313 (2001).
Šašura, M. & Bužek, V. Multiparticle entanglement with quantum logic networks: application to cold trapped ions. Phys. Rev. A 64, 012305 (2001).
Barenco, A. et al. Elementary gates for quantum computation. Phys. Rev. A 52, 3457–3467 (1995).
Möttönen, M., Vartiainen, J. J., Bergholm, V. & Salomaa, M. M. Quantum circuits for general multiqubit gates. Phys. Rev. Lett. 93, 130502 (2004).
Liu, Y., Long, G. L. & Sun, Y. Analytic one-bit and CNOT gate constructions of general n-qubit controlled gates. Int. J. Quantum Inform . 6, 447–462 (2008).
Grigorenko, I. A. & Khveshchenko, D. V. Single-step implementation of universal quantum gates. Phys. Rev. Lett. 95, 110501 (2005).
Liu, W. Z. et al. Nuclear magnetic resonance implementation of universal quantum gate with constant Hamiltonian evolution. Appl. Phys. Lett. 94, 064103 (2009).
Luo, M. X. & Wang, X. J. Universal quantum computation with qudits. Sci. China-Phys. Mech. Astron . 57, 1712–1717 (2014).
Simon, B. Holonomy, the quantum adiabatic theorem and Berry’s phase. Phys. Rev. Lett. 51, 2167–2170 (1983).
Berry, M. V. Quantal phase factors accompanying adiabatic changes. Proc. R. Soc. London, Ser. A 392, 45–47 (1984).
Wilczek, F. & Zee, A. Appearance of gauge structure in simple dynamical systems. Phys. Rev. Lett. 52, 2111–2114 (1984).
Aharonov, Y. & Anandan, J. Phase Change during a cyclic quantum evolution. Phys. Rev. Lett. 58, 1593–1596 (1987).
Zanardi, P. & Rasetti, M. Holonomic quantum computation. Phys. Lett. A 264, 94–99 (1999).
Duan, L. M., Cirac, J. I. & Zoller, P. Geometric manipulation of trapped ions for quantum computation. Science 292, 1695–1697 (2001).
Zhu, S. L. & Wang, Z. D. Implementation of universal quantum gates based on nonadiabatic geometric phases. Phys. Rev. Lett. 89, 097902 (2002).
Zhu, S. L. & Wang, Z. D. Universal quantum gates based on a pair of orthogonal cyclic states: Application to NMR systems. Phys. Rev. A 67, 022319 (2003).
Zhu, S. L. & Wang, Z. D. Unconventional geometric quantum computation. Phys. Rev. Lett. 91, 187902 (2003).
Zheng, S. B. Unconventional geometric quantum phase gates with a cavity QED system. Phys. Rev. A 70, 052320 (2004).
Falci, G., Fazio, R., Palma, G. M., Siewert, J. & Vedral, V. Detection of geometric phases in superconducting nanocircuits. Nature 407, 355–358 (2000).
Wang, X. B. & Matsumoto, K. Nonadiabatic conditional geometric phase shift with NMR. Phys. Rev. Lett. 87, 097901 (2001).
Faoro, L., Siewert, J. & Fazio, R. Non-abelian holonomies, charge pumping and quantum computation with josephson junctions. Phys. Rev. Lett. 90, 028301 (2003).
Solinas, P., Zanardi, P., Zangh, N. & Rossi, F. Semiconductor-based geometrical quantum gates. Phys. Rev. B 67, 121307 (2003).
Feng, X. L. et al. Scheme for unconventional geometric quantum computation in cavity QED. Phys. Rev. A 75, 052312 (2007).
Sjöqvist, E. et al. Non-adiabatic holonomic quantum computation. New J. Phys. 14, 103035 (2012).
Xue, Z. Y., Shao, L. B., Hu, Y., Zhu, S. L. & Wang, Z. D. Tunable interfaces for realizing universal quantum computation with topological qubits. Phys. Rev. A 88, 024303 (2013).
Xue, Z. Y. et al. Robust interface between flying and topological qubits. Sci. Rep . 5, 12233 (2015).
Xu, G. F. & Long, G. L. Universal nonadiabatic geometric gates in two-qubit decoherence-free subspaces. Sci. Rep . 4, 6814 (2014).
Xu, G. F. & Long, G. L. Protecting geometric gates by dynamical decoupling. Phys. Rev. A 90, 022323 (2014).
Jones, J. A., Vedral, V., Ekert, A. & Castagnoli, G. Geometric quantum computation using nuclear magnetic resonance. Nature 403, 869–871 (2000).
Leibfried, D. et al. Experimental demonstration of a robust, high-fidelity geometric two ion-qubit phase gate. Nature 422, 412–415 (2003).
Abdumalikov Jr, A. A. et al. Experimental realization of non-Abelian non-adiabatic geometric gates. Nature 496, 482–485 (2013).
Feng, G. R., Xu, G. F. & Long, G. L. Experimental realization of nonadiabatic Holonomic quantum computation. Phys. Rev. Lett. 110, 190501 (2013).
Arroyo-Camejo, S., Lazariev, A., Hell, S. W. & Balasubramanian, G. Room temperature high-fidelity holonomic single-qubit gate on a solid-state spin. Nat. Commun. 5, 4870 (2014).
Zu, C. et al. Experimental realization of universal geometric quantum gates with solid-state spins. Nature 514, 72–75 (2014).
Clarke, J. & Wilhelm, F. K. Superconducting quantum bits. Nature 453, 1031–1042 (2008).
Neeley, M. et al. Process tomography of quantum memory in a Josephson-phase qubit coupled to a two-level state. Nat. Physics 4, 523–526 (2008).
Han, S., Lapointe, J. & Lukens, J. E. Single-Electron Tunneling and Mesoscopic Devices (Springer-Verlag press, Berlin Heidelberg), Vol. 31, pp. 219–222 (1991).
Barends, R. et al. Coherent josephson qubit suitable for scalable quantum integrated circuits. Phys. Rev. Lett. 111, 080502 (2013).
Xiang, Z. L., Lü, X. Y., Li, T. F, You, J. Q. & Nori, F. Hybrid quantum circuit consisting of a superconducting flux qubit coupled to a spin ensemble and a transmission-line resonator. Phys. Rev. B 87, 144516 (2013).
Neumann, P. et al. Excited-state spectroscopy of single NV defects in diamond using optically detected magnetic resonance. New J. Phys. 11, 013017 (2009).
Pradhan, P., Anantram, M. P. & Wang, K. L. Quantum computation by optically coupled steady atoms/quantum-dots inside a quantum electro-dynamic cavity, arXiv:quant-ph/0002006.
You, J. Q. & Nori, F. Superconducting circuits and quantum information. Phys. Today 58, 42 (2005).
You, J. Q. & Nori, F. Atomic physics and quantum optics using superconducting circuits. Nature 474, 589–597 (2011).
Buluta, I., Ashhab, S. & Nori, F. Natural and artificial atoms for quantum computation. Rep. Prog. Phys. 74, 104401 (2011).
Shevchenkoa, S. N., Ashhabb, S. & Nori, F. Landau-Zener-Stückelberg interferometry. Phys. Rep . 492, 1–30 (2010).
Nation, P. D., Johansson, J. R., Blencowe, M. P. & Nori, F. Stimulating uncertainty: amplifying the quantum vacuum with superconducting circuits. Rev. Mod. Phys. 84, 1–24 (2012).
Blais, A., Huang, R. S., Wallraff, A., Girvin, S. M. & Schoelkopf, R. J. Cavity quantum electrodynamics for superconducting electrical circuits: an architecture for quantum computation. Phys. Rev. A 69, 062360 (2004).
Yang, C. P., Chu, S. I. & Han, S. Possible realization of entanglement, logical gates and quantum-information transfer with superconducting-quantum-interference-device qubits in cavity QED. Phys. Rev. A 67, 042311 (2003).
Xiang, Z. L., Ashhab, S., You, J. Q. & Nori, F. Hybrid quantum circuits: superconducting circuits interacting with other quantum systems. Rev. Mod. Phys. 85, 623–653 (2013).
Koch, J. et al. Charge-insensitive qubit design derived from the Cooper pair box. Phys. Rev. A 76, 042319 (2007).
Hoi, I. et al. Demonstration of a single-photon router in the microwave regime. Phys. Rev. Lett. 107, 073601 (2011).
Majer, J. et al. Coupling superconducting qubits via a cavity bus. Nature 449, 443–447 (2007).
Leek, P. J. et al. Using sideband transitions for two-qubit operations in superconducting circuits. Phys. Rev. B 79, 180511(R) (2009).
Fedorov, A., Steffen, L., Baur, M., da Silva, M. P. & Wallraff, A. Implementation of a Toffoli gate with superconducting circuits. Nature 481, 170–172 (2012).
Yang, C. P., Su, Q. P. & Han, S. Generation of Greenberger-Horne-Zeilinger entangled states of photons in multiple cavities via a superconducting qutrit or an atom through resonant interaction. Phys. Rev. A 86, 022329 (2012).
Su, Q. P., Yang, C. P. & Zheng, S. B. Fast and simple scheme for generating NOON states of photons in circuit QED. Sci. Rep . 4, 3898 (2014).
Chang, J. B. et al. Improved superconducting qubit coherence using titanium nitride. Appl. Phys. Lett. 103, 012602 (2013).
Paik, H. et al. Observation of high coherence in josephson junction qubits measured in a three-dimensional circuit QED architecture. Phys. Rev. Lett. 107, 240501 (2011).
Peterer, M. J. et al. Coherence and decay of higher energy levels of a superconducting transmon qubit. Phys. Rev. Lett. 114, 010501 (2015).
Chen, W., Bennett, D. A, Patel, V. & Lukens, J. E. Substrate and process dependent losses in superconducting thin film resonators. Supercond. Sci. Technol . 21, 075013 (2008).
Leek, P. J. et al. Cavity quantum electrodynamics with separate photon storage and qubit readout modes. Phys. Rev. Lett. 104, 100504 (2010).
Megrant, A. et al. Planar superconducting resonators with internal quality factors above one million. Appl. Phys. Lett. 100, 113510 (2012).
Luis, A. Quantum mechanics as a geometric phase: phase-space interferometers. J. Phys. A: Math. Gen . 34, 7677–7684 (2001).
Wang, X. & Zarnadi, P. Simulation of many-body interactions by conditional geometric phases. Phys. Rev. A 65, 032327 (2002).
Acknowledgements
This work was supported in part by the National Natural Science Foundation of China under Grant Nos [11074062, 11374083, 11504075] and the Zhejiang Natural Science Foundation under Grant No. LZ13A040002. This work was also supported by the funds from Hangzhou City for the Hangzhou-City Quantum Information and Quantum Optics Innovation Research Team.
Author information
Authors and Affiliations
Contributions
T.L., S.J.X. and C.P.Y. conceived the idea. X.Z.C. carried out all calculations under the guidance of Q.P.S. and C.P.Y. All the authors discussed the results. T.L., S.J.X. and C.P.Y. contributed to the writing of the manuscript.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Liu, T., Cao, XZ., Su, QP. et al. Multi-target-qubit unconventional geometric phase gate in a multi-cavity system. Sci Rep 6, 21562 (2016). https://doi.org/10.1038/srep21562
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep21562
- Springer Nature Limited
This article is cited by
-
Efficient scheme for realizing a multiplex-controlled phase gate with photonic qubits in circuit quantum electrodynamics
Frontiers of Physics (2022)
-
One-step construction of a multi-qubit controlled phase gate with ensembles of nitrogen-vacancy centers in hybrid circuit QED
Quantum Information Processing (2022)
-
One-step implementation of a multi-target-qubit controlled phase gate with cat-state qubits in circuit QED
Frontiers of Physics (2019)
-
One-step implementation of a multi-target-qubit controlled phase gate in a multi-resonator circuit QED system
Quantum Information Processing (2018)
-
Circuit QED: cross-Kerr effect induced by a superconducting qutrit without classical pulses
Quantum Information Processing (2017)