Abstract
In the present study, the inhibition performance of some medicinal plants (i.e. Yarrow, Wormwood, Maurorum, Marjoram, and Ribes rubrum) was theoretically and experimentally investigated for mild steel immersed in 1M HCl. In this way, the obtained extracts characterized by Fourier transform infrared spectroscopy (FT-IR) and the electrochemical and theoretical techniques were used to study the inhibition mechanisms of the extracts for the immersed electrode in the acidic solution. In addition, the microstructure of the electrode surface immersed in the blank and inhibitor-containing solutions characterized by field emission scanning electron microscopy (FE-SEM), and Violet-visible (UV–Vis) spectroscopy was used to confirm the adsorption of the compounds on the electrode surface. The obtained electrochemical results revealed that the inhibition performance of the green inhibitors increased by increasing their dosage in the electrolyte. In addition, it was proved that Marjoram plant extract possessed the most inhibition efficiency (up to 92%) among the under-studied herbal extracts. Marjoram extract behaved as a mixed-type inhibitor in the hydrochloric acid solution, and the adsorption process of the extract on the steel surface followed the Langmuir adsorption model. Adsorption of the compounds on the steel surface was also studied using density functional theory (DFT), and it was found that the protonated organic compounds in the extract have a high affinity for adsorption on the electrode surface in the acidic solution.
Similar content being viewed by others
Introduction
It is asserted that natural disasters, including tornadoes, lightning, floods, fires, and earthquakes, have lower yearly costs than corrosion1. Therefore, safeguarding alloys from the phenomena is an alluring topic in both the industrial and academic spheres2,3,4. Acid solutions are frequently used in industrial cleaning, acid pickling, and oil-well acidizing5,6. Corrosion inhibitor compounds are one of the most important ways to avoid alloys submerged in corrosive solutions from degrading7,8.
It is well known that inhibitors’ electronic structure and spatial orientation have been linked to their efficacy9. Generally, inhibitors containing π-bonds and heteroatoms (P, S, N, and O) with lone pair electrons are the most potent and efficient10. Because both inorganic and organic inhibitors are usually hazardous, researchers are looking for more environmentally friendly substances, often known as green or natural inhibitors (NIs)11,12. NIs, which comprise medication and plant extracts, are regarded as safe substances devoid of heavy metals13. The use of medicinal plants as NIs for submerged alloys in aggressive media has been experimentally described previously, in addition to their conventional use as medicines14,15. Antimalarial, analgesic, antibacterial, antiviral, antifungal, and antineoplastic medications have all been reported to be employed as NIs for submerged alloys under different conditions16,17.
For hundreds of years, people have used Urtica dioica L. extract as an effective ancient medicine to treat anemia, eczema, arthritis, gout, and painful muscles and joints. Today, it is utilized to address urinary issues when prostate enlargement is still in its early stages18. Nasibi et al.19 investigated the corrosion inhibition performance of the extract for mild steel (MS) immersed in 1M HCl. The obtained electrochemical analysis results revealed that the maximum inhibition efficiency of the extract was 92.24% in the presence of 300 ppm of the NI at 40 °C. Malva sylvestris L. is another ancient medicine with antimicrobial, hepatoprotective, anti-inflammatory, and antioxidant properties20. Naghi Tehrani et al.15 used the herbal medicine as NI for MS and found that the inhibition efficiency of the extract was about 91% at the concentration of 2000 ppm in a saline media. Mentha suaveolens L. extract has many health advantages, including lowering fevers and easing asthma and depression. Mint is frequently used as a tea as a home remedy to help relieve stomach discomfort. In addition, the extract was originally used as a medicinal herb to treat stomach and chest aches21. Salhi et al.14 used the plant’s essential oil and aqueous extract as a potent NI for MS in 0.5M H2SO4. The obtained EIS results showed that 2000 ppm of the essential oil and the aqueous extract provided inhibition efficiencies of 81.9% and 91.3% in the corrosive media, respectively. Foeniculum vulgare M., which is usually known as fennel, has been used for respiratory, reproductive, endocrine, and digestive systems. It is additionally utilized by breastfeeding women as a galactagogue agent22. Lahhit et al.23 and Bouoidina et al.24 used essential oil of the herbal medicine as an NI for carbon steel in an HCl electrolyte. Both studies proved that the essential oil's inhibition performance increased in the presence of more inhibitor dosages but decreased with the increase in temperature.
Yarrow is a helpful plant to keep on hand for various illnesses since it possesses antiseptic, astringent, antibacterial, and anti-inflammatory qualities. To aid in stopping bleeding, Yarrow leaves can be applied topically or powdered into a styptic powder25. Wormwood has historically been considered a helpful treatment for issues with the liver and gallbladder. Absinthin and Anabsinthin, two potent bitter substances in Wormwood, stimulate the gallbladder and digestive systems. According to popular belief, Wormwood helps to ease intestinal spasms and stimulate digestion26. In folk medicine, Maurorum treats piles, migraine, warts, and rheumatism as purgative, diaphoretic, expectorant, and diuretic27. Marjoram has a long history of usage in both traditional medicine and cookery. It may reduce inflammation, ease gastric discomfort, and regulate the menstrual cycle, among other potential advantages28. Lycopene, an anti-oxidant carotenoid, is found in Ribes Rubrum. Heart disease and cancer risk are both decreased by lycopene, particularly prostate cancer. Furthermore, it shields the body from the effects of free radical stress, which can harm DNA and other cellular structures29.
In the present study, extracts of five different herbal medicines (i.e., Yarrow, Wormwood, Maurorum, Marjoram, and Ribes rubrum) were used as NIs for MS exposed to 1M HCl solution, and their inhibition performance was investigated using electrochemical techniques. The results of this research can open a window to using of traditional herbal medicines as new and powerful NIs to prevent corrosion damage.
Materials and methods
Materials
HCl solution (1M) was prepared using hydrochloric acid (37% Merck) and distilled water. Steel panels (St-12) in the dimension of 0.5 × 5 × 15 cm were obtained from Foolad Mobarakeh Company (Iran) with the following chemical composition: C (0.190 wt%), Si (0.288 wt%), Mn (1.388 wt%), Cr (0.03 wt%), Mo (0.016 wt%), Co (0.386 wt%), Cu (0.299 wt%), Nb (0.354%), and Fe (balance). Ribes rubrum (collected from Arsbaran forests, Iran), Wormwood (collected from Mazandaran, Iran), Marjoram (collected from Astara, Iran), Yarrow (collected from Esfahan, Iran), Maurorum (collected from Tabriz, Iran). Picture of the plants are shown in Fig. 1.
Preparation of the extracts
At first, the medicinal plants, including Yarrow, Wormwood, Maurorum, Marjoram, and Ribes rubrum were powdered, and then 50 g of powders was mixed with 500 ml of distilled water, followed by heating and stirring on a magnetic stirrer at 70 °C for 5 h. afterward, the mixtures were centrifuged at 5000 rpm for 5 min to remove undissolved particles. Then, the solvent (water) was evaporated by incubating the filtered solution in an oven at 500 °C for 48 h and the obtained dry powders were used as the NIs for the electrochemical analyses.
Steel surface preparation
To prepare the surface of mild steel (MS) panels for the electrochemical tests, the sheets were degreased with acetone to remove surface contamination and then polished with 400, 600, 800, and 1200 sandpapers to remove the oxidized layers. Then, they were rewashed with acetone and dried at 50 °C.
Characterization methods
To investigate the chemical compounds in the used extracts, FT-IR analysis was performed in the range of 400–4000 cm−1 using a Perkin-Elmer spectrometer. UV–VIS spectra were carried out using a UV–Vis spectrophotometer (Hitachi U-3010) in the solution medium. Using an emission scanning electron microscope (FE-SEM) model Mitra3, the surface of the immersed electrodes was studied in the presence and absence of the NIs.
Electrochemical tests
The corrosion inhibition of the extracts for MS immersed in the 1M HCl was evaluated in the presence of different dosages of the NIs (0, 200, 400, 600, and 800 ppm) at different immersion times (0.25, 2, 4 6, and 24 h).
Electrochemical analyses (EIS and PP) were done using a 3-electrode system including a saturated calomel reference electrode, platinum as an auxiliary electrode, and the prepared steel panels with a diameter of 1 cm2 as the working electrodes by an Ivium Compactstat instrument. Before performing the electrochemical analyses, the steel electrodes were submerged in the corrosive solutions for 15 min to reach steady state conditions. EIS measurements were performed in the frequency range of 10 kHz to 10 mHz with a sinusoidal voltage of ± 10 mV. PP tests were also carried out in the potential range of + 250 mV to – 250 mV with a 0.001 V s−1 scan rate.
Theoretical studies
The ORCA program package, module version 4.0, was used to carry out the quantum-based calculations. Prior to completing geometry optimization, the calculations began with no geometry constraints. The global minimum for geometry optimizations has been found after careful consideration. The hybrid B3LYP functional level with a higher basis set, indicated as 6-311G(d,p), was used for all calculations with complete geometry optimization30. Self-Consistent Reaction Field (SCRF) theory and the Polarized Continuum Model (PCM) have been used to analyze the effect of solvent31. Koopman’s theory states that the energies of the HOMO and LUMO orbitals were used to calculate the ionization energy and the electronic affinity32,33.
Ethical statement
The plant collection and use was in accordance with all the relevant guidelines.
Results and discussion
FT-IR investigations
FT-IR spectroscopy was used to investigate the chemical compounds in the under-studied extracts. Other plant extracts are presented in the supplementary information except for the FT-IR result of the Marjoram extract. The FT-IR spectrum of herbal extract from Marjoram and the present chemical compounds in the extract (described by Lopez et al.34) are shown in Figs. 2 and 3, respectively.
As demonstrated in Fig. 2, the marjoram extract contains chemical compounds with C–H, C–OH, O–H, and aromatic rings. The broad band located at 3428 cm−1 and the sharp peak centered at 1623 cm−1 belong to the stretching and bending vibrations of O–H bonds in the hydroxyl groups and surface adsorbed water, respectively35. The stretching vibrations peak of C–H bonds in aliphatic groups is located at 2830 cm−136. Absorption peaks at 1521 cm−1 and 1401 cm−1 are related to the stretching vibration of C=C bonds in aromatic rings and the bending vibration of C–H bonds, respectively37. The peak of stretching vibration of C–O–C and C–OH bonds appeared at 1064 cm−138. The peak centered at 539 cm−1 is related to the bending vibration of the C–H bonds connected to the aromatic rings and the bending vibration of the rings37.
EIS measurements
Nyquist and Bode curves of MS electrodes immersed in the 1M HCl electrolyte with different dosages of the NIs for various exposing times are presented in Figs. S6 and S7, respectively, in supplementary information. The charge transfer resistance of the samples can be directly related to the diameter of the Nyquist semicircles. The Nyquist curves clearly show the increased diameter of the semicircles in the presence of the herbal extracts compared to the inhibitor-free samples, indicating the effect of the medicinal plant extracts on the anodic and cathodic reactions of MS corrosion and showing their inhibition effect. The increased diameter of the semicircles is also observed with increasing time, suggesting that the adsorption of the NI’s compounds on the immersed MS and the formation of the protective layer on the electrode surface is a time consuming process. In addition, it can be seen that the largest diameter of the semicircles in all concentrations and all immersion times belongs to the sample containing Marjoram extract, indicating that the herbal extract has a more significant effect on the corrosion reactions of the immersed MS in the acidic environment than other extracts.
The impedance at the lowest frequency (|Z10mHz|) can be considered an index for a system's total corrosion resistance39,40. A comparison of the |Z10mHz| values observable from the Bode curves (Fig. S7) revealed that the index values for the NI-containing samples were more than those obtained for the blank samples. Furthermore, the total corrosion resistance values increased with the immersion times and the concentration of the NIs. It is also observed that the immersed MS in the solution containing the Marjoram extract possessed more |Z10mHz|values than the other samples.
Due to the fact that only one peak can be seen in the phase angle curves, it can be concluded that the under-studied samples can be electrochemically modeled with a simple Randels equivalent electrical circuit. In this circuit, Rs is solution resistance, Rct is charge transfer resistance, and Qdl is a constant phase element (CPE) of the double layer, which is used instead of an ideal capacitor to better modeling of the EIS data. According to Figs. S6 and S7, the modeled data fitted well with the experimental results, suggesting the accuracy of the obtained electrochemical data reported in Table S1 (supplementary information). In this table, Y0 and n are the admittance and power values of Qdl, respectively. The “n” value can represent the degree of heterogeneity of the metal surface (0 ≤ n ≤ 1). According to literature41,42, the higher n values in the inhibitor-containing solutions proves the creation of a protecting film on the steel surface.
In Table S1, the Cdl value, which corresponds to the capacity of the double-layer capacitor, is estimated with Eq. (1)43.
As the concentration of the extract increases, the Cdl value decreases. The decline can be attributed to a decrease in the dielectric constant due to substituting the extract’s chemical compounds with water molecules on the MS surface. Indeed, since the value of the water dielectric coefficient is high than organic molecules, the adsorption of the organic molecules on the MS surface and desorption of water molecules results in the increment of the capacitance values. In addition, the capacitance of a capacitor has an inverse relationship with the distance between the plates44. Thus, replacing of the large inhibitor molecules instead of water molecules on the metal surface increases the thickness of the electric double layer, causing a decrease in the Cdl value.
According to the results reported in Table 1, the Cdl values were significantly reduced by increasing the dosage of the NIs and exposing time. In other words, due to the adsorption of the natural compounds on the immersed surface, the formed layer leads to a decrease in the Cdl values. Among the herbal extracts, it can be again seen that the lowest values of the Cdl belong to the Marjoram sample, which also confirms the formation of a more protective layer on the steel surface in the presence of this inhibitor.
Since the obtained Rct values in Table S1 can be considered as the electrochemical resistance against corrosion reactions45, the column diagrams of the parameter are shown in Fig. 4 for a better comparison of the results.
From the graphs shown in Fig. 4, it can be seen that the charge transfer values increased by increasing the dosage of the NIs, indicating that the adsorption of the chemical compounds on the MS surface is the main mechanism for the inhibition behavior of the used NIs. In addition, unlike the blank samples, the Rct values for the NI-containing samples increased by increasing the immersion time, as seen in Nyquist and Bode diagrams. Furthermore, the higher charge transfer resistance of the sample containing Marjoram extract can be clearly observed, followed by the sample containing Yarrow extract, which confirms the results of the previous results. Moreover, the lowest corrosion resistance values among the NI-containing samples belonged to those containing the extracts of R. Rubrum and Maurorum.
The value of inhibition efficiency (%IE) in Table S1 is obtained from Eq. (2).
where, Rctin and Rct0 are the charge transfer resistance in the presence and absence of the NIs, respectively. The obtained results confirm the higher inhibition performance of the Marjoram-containing sample, followed by the samples containing Yarrow, Wormwood, Ribes rubrum, and Maurorum herbal extracts.
PP measurements
PP curves of the samples containing different amounts of the herbal extracts are represented in Fig. S11. Electrochemical parameters obtained from Tafel extrapolation of the PP curves are reported in Table S2 (in supplementary information). The PP curves show that by increasing the concentration of the NIs the corrosion current density (corrosion rate) decreases, confirming the obtained data from EIS analysis. In fact, in the presence of more dosages of the NIs, and the formation of a thicker adsorbed layer on the immersed electrodes, the electron transfer process from the anode regions to the cathode regions disrupts, which can inhibit the corrosion reactions46.
In Table S2, the slopes of the anodic and cathodic branches are represented by βa and βc. Ecorr is the corrosion potential and icorr is the corrosion current density of the electrodes. Rp is the polarization resistance and %IE is the inhibition efficiency, which are respectively calculated using Eqs. (3) and (4)47.
In Eq. (4), θ is the coverage degree of the NIs obtained from Eq. (5).
where i0corr and icorr are the corrosion current densities of the samples without and with the Nis, respectively. Column graphs of the obtained polarization resistance and inhibition efficiency values from the Tafel extrapolation of the PP curves are shown in Fig. 5.
It can be seen from Fig. 5 that the samples with the extracts of Marjoram and Yarrow have the highest polarization resistance and inhibition efficiency values. Accordingly, the highest inhibition efficiency (about 90%) and the lowest corrosion rate among the studied samples were obtained for the sample with 800 ppm of Marjoram. These results confirm those obtained in the EIS test and indicate that the inhibition performance of Marjoram extract is optimal compared to the other samples. Indeed, the formation of a more protective layer in the presence of the NI on the surface of the MS electrode led to providing a higher polarization resistance value than other herbal extracts.
At low concentrations, the surface coverage of the NIs is inadequate. So, with the increase of the NI dosages and increase of the surface coverage, the inhibition efficiency of the NIs arises (Fig. 5b). Despite the higher icorr value in the blank solution than the NI-containing samples, the Tafel slopes remained almost unchanged, indicating that the extracts had no significant effect on the reaction kinetics of the hydrogen gas evolution and the mechanism of iron dissolution. Therefore, the main mechanism of corrosion inhibition is simple adsorption of the compounds in the extracts on the electrode surface.
Due to the negligible alterations in the values of βa and βc in the presence of different dosages of the NIs, as well as the slight shift of the corrosion potential in these samples (less than ± 85 mV compared to the blank sample), it can be concluded that the NIs acted as mixed-type inhibitors16,48.
By adding the compounds shown in Fig. 5 to the corrosive electrolyte, the protonation of these compounds in the acidic electrolyte causes them to be absorbed on the steel surface because the steel surface has gained a negative charge due to the absorption of chloride anion on it. On the other hand, the formation of a complex between the iron cation produced by the anodic reaction with the organic compounds in the extract causes the formation of insoluble compounds, which create a protective layer by depositing on the surface of the immersed MS. In addition, creating a covalent bond between lone pair electrons of heteroatoms and multiple bonds in the compounds of the extract with the empty orbital of iron atoms on the surface of the electrode leads to the formation of a chemical bond between the electrode and the compounds. So, the inhibition mechanism of the extracts can be considered physical, chemical, or physical–chemical. In this regard, investigating adsorption isotherm models can help identify the inhibition mechanism.
Adsorption isotherms
The mechanism of surface adsorption and the interaction between molecules of a NI and the metal surface can be characterized using models called adsorption isotherms49,50. Langmuir (Eq. 6) and Freundlich (Eq. 7) adsorption isotherms are the main models widely employed to investigate the adsorption of an inhibitor on an electrode surface51.
where C is the concentration of the NI, and θ is the coverage degree. Langmuir and Freundlich absorption constants are respectively represented by Kads ads and KF. The affinity of a NI adsorption can be achieved by the coefficient 1/n in the Freundlich isotherm equation51. According to Eq. (6), if C/θ is plotted versus C, and the linear regression (R2) is close to one, it can be concluded that the NI followed the Langmuir isotherm model. Likewise, a linear regression near to one for plotting ln (θ) versus ln C shows that the inhibitor followed the Freundlich model.
According to Fig. 6, the immersed MS in the electrolyte solution with 800 ppm Marjoram extract (the optimum sample based on the electrochemical analyses) follows the Langmuir adsorption model with R2 > 0.99, indicating that the adsorption is in a monolayer form and all active adsorption sites have the same tendency to adsorb the inhibitor compounds49,50.
The values of Kads and ΔGads (obtained from Eq. 8) are equal to 5786.03 L mol−1 and − 31.309 kJ mol−1, respectively.
In Eq. (8), R is the universal gas constant (3.314 kJ mol−1) and T is the absolute temperature (K).
The negative value of ΔGads indicates the spontaneity of the inhibitor adsorption on the MS surface in the corrosive media. Additionally, the high value of Kads suggests that the NI has a high thermodynamical affinity to adsorb on the surface of the immersed metal52,53. Generally, the adsorption mechanism can be determined by the absolute value of ΔGads. When ΔGads < 20 kJ mol−1, the adsorption mechanism is physisorption, and when ΔGads > 40 kJ mol−1, chemisorption can be considered the main adsorption mechanism. 20 kJ mol−1 < ΔGads < 40 kJ mol−1 indicates that the physicochemical adsorption is the main interaction between the NI and the immersed metal54,55. So, for the under-studied sample, it can be concluded that the adsorption of the NI on the MS surface is in the form of the physico-chemical model.
Microscopic studies
Figure 7 displays the morphology and microstructure of the MS surface exposed to the acid solution with and without the optimum NI (800 ppm Marjoram extract). The highly rough surface of the soaked MS in the blank solution indicates the surface degradation of the electrode due to the dissolution of iron atoms as Fe2+ and Fe3+ cations into the electrolyte. From the high magnification micrograph (Fig. 7b), it can be clearly seen that the surface was strongly damaged by the direct attack of the acid solution.
In the presence of the NI, a compact adsorbed layer can be seen on the surface of the exposed MS. The protection layer led to the reduction of Fe dissolution in the acidic environment and created a smoother surface. In fact, the formation of covalent bonds between the iron atoms and the extract’s compounds reduced the iron dissolution in the HCl electrolyte. Therefore, it can be concluded that the presence of the NI affects the corrosion reactions of the MS and reduces the rate of anodic and cathodic reactions, confirming the electrochemical analyses. SEM image of yarrow plant extract as an organic inhibitor in the sample containing 800 ppm inhibitor is provided for a comparison in Fig. 8.
UV–VIS spectroscopy
The interaction between the immersed MS surface in the NI-containing medium and the inhibitor molecules in an acidic medium can be studied using UV–Vis spectroscopy. To confirm the formation of an adsorbed inhibitor-based protect layer on the immersed metal surface, UV–Vis analysis was performed before and after exposing the MS electrodes to the 1M hydrochloric acid solution with 800 ppm Marjoram extract (Fig. 9). Generally, the appeared peaks at 250 and 325 nm in the spectrum of the MS-free electrolyte can be related to π–π* and n–π* electron transition of C=C and C=O bonds, respectively56. It is clear from Fig. 9 that the intensity of the peaks decreased significantly after 24 h immersion of the MS electrode in the solution, indicating the adsorption of the extract’s compounds on the surface of the electrode, which decreased the concentration of organic compounds in the solution. These observations indicate the formation of a bond between inhibitor molecules and the surface of the steel sample, which reduces the opening of organic compounds in the electrolyte to absorb on the surface of the electrode. The lone pair electrons of heteroatoms, as well as ring π electrons, have been successfully shared with d orbitals of Fe atoms located on the steel surface. These reactions create a single nanometer layer on the surface, which can absorb and reduce the speed reactions of the steel in the active sites of the metal.
Schematic of the adsorption process
A schematic of the adsorption mechanisms of the Marjoram extract compounds on the MS surface immersed in an acidic environment is shown in Fig. 10.
In the first stage, the anodic reaction of the corrosion produces a positively charged region near the immersed electrode surface due to the presence of Fe2+ and Fe3+ in this region. The positively charged region causes the attraction of Cl− from the electrolyte toward the metal surface and form a negatively charged layer on the surface of the immersed electrode41. At the next stage, the protonated organic compounds in the solution adsorb on the MS surface through an electrostatic attraction and forms a compact layer on the electrode/electrolyte interface57,58. Finally, unsaturated pair electrons on oxygen atoms and π-bonds in the chemical structure of the Marjoram extract compounds can be shared with vacant iron orbitals on the electrode surface and lead to chemical adsorption. Therefore, the physicochemical adsorbed layer on the surface of the MS prevents direct contact of the electrode surface with the corrosive environment and reduces the corrosion rate of the metal47,59.
Theoretical investigations
DFT is one of the most powerful tools in quantum chemistry. It is the shooting star in theoretical modeling. The optimized chemical structures of the present compounds in the optimum extract (Marjoram) are presented in Table S3 (in supplementary information). In the literature60,61, quantum calculations for the main substances present in the extract are performed to predict the mechanism of the compounds to protect the working electrode surface from corrosion reactions. In this study, DFT calculations were performed for 8 active substances in the Marjoram called Thymol, Carvacrol, β_Myrcene, Linalool, Caryophyllene, Cymene, Terpinene, and Sabinene as described by Lopez et al.34. Calculated parameters such as the energy of the highest orbital of the occupied EHOMO molecule, the lowest of the non-occupied molecular orbital of ELUMO, the energy distance between HOMO and LUMO (ΔE), the ionization potential (IP), the electron affinity (Ea), the electronegativity (χ), hardness (σ), and ΔN (the fraction of electrons that move from the molecule to the metal surface) for the molecules are given in Table 1. Parameters IP, EA, χ, σ, and ΔN are obtained using the following equations62,63.
In the last equation, χFe is 7 eV, and σFe is equal to zero.
Large amounts of EHOMO indicate that the molecule tends to give electrons to the low-energy empty orbitals of the using electrode64. The increase in values of EHOMO facilitates the adsorption process by affecting the transfer process between the adsorption layers. Therefore, the effectiveness of an inhibitor can be improved by enhancing the transferring process. From Table 1, it is clear that the EHOMO values for the under-studied inhibitors decrease in the order; Sabinene > Thymol > Carvacrol > Terpinene > β_Myrcene > Linalool > Caryophyllene > Cymene. However, inhibiting molecules does not only give electrons to the empty orbital of the Fe atom, but electrons are also accepted from the occupied orbitals of the electrode. This process leads to the creation of the feedback bond. Thus, ELUMO indicates the ability of an inhibitor to accept electrons from the electrode surface, which would definitely improve the adsorption and inhibition efficiency of the anti-corrosion agent on the steel surface65. The ELUMO for the under-studied molecules followed the order: Sabinene > Linalool > Caryophyllene > Carvacrol > Thymol > Cymene > β_Myrcene > Terpinene, indicating that the Terpinene has a higher affinity to electron accept from the immersed electrode. ΔE = EHOMO−ELUMO is another parameter whose low value indicates higher inhibition efficiency of the corrosion inhibitor66. The obtained results (Table 1) revealed that the Cymene molecule has a fewer ΔE than the other molecules. Therefore, the Cymene molecule has a greater effect on protecting the immersed electrode from corrosion in the acidic environment. ΔN is another important quantum parameter in the study of anti-corrosion agents. Generally, positive and negative ΔN values indicate electron transfer from the anti-corrosion agent to the electrode surface and from the electrode surface to the anti-corrosion molecule, respectively65,67. It has also been reported that values of less than 3.6 indicate a higher electron-donating power of the molecule resulting in better molecular inhibition performance. Based on the results in Table 1, the values of ΔN are positive for all molecules (except for β_Myrcene), and their value is less than 3.6 (except for Sabinene). Thus, all molecules (except for β_Myrcene and Sabinene) are capable of forming covalent bonds to the immersed electrode surface and act as an effective protection agent for the used mild steel against corrosion reactions.
In an attempt to further evaluate the molecular reactivity and stability of the inhibitors, the absolute hardness (η) and softness (σ) were determined. The absolute softness and hardness are related to soft and hard solutions through the theory of HSAB68,69. Chemical hardness indicates the polarization resistance of the electron cloud of molecules, atoms, or ions with minor perturbations of the chemical reaction. The absolute hardness for the under-studied molecules was reduced in the following order: Sabinene > Caryophyllene > Linalool > Cymene > Carvacrol > Thymol > β_Myrcene > Terpinene. Terpinene, with the lowest hardness value (1.805 eV) compared with other compounds, had the lowest ∆E, while Sabinene with the highest hardness value (3.165 eV), had the highest ∆E. The softness followed a reverse trend of hardness values. This result was consistent with the general belief that hard compounds should have a large ∆E and soft molecules should have small ∆E. Therefore, Terpinene is expected to have higher inhibition performance than other compounds since the lowest global hardness value (i.e., the highest global softness) was likely the highest inhibition performance.
The dipole moment (µ) of compounds gives information about the polarity in the bond of a molecule and the distribution of electrons in the molecules. It is well known that a higher dipole moment value of an inhibitor tends to more adsorption tendency of the compound on the immersed electrode surface70,71,72. The µ value for the under-studied compounds was reduced in the following order: Carvacrol > Linalool > Thymol > Terpinene > Caryophyllene > β_Myrcene > Sabinene > Cymene. Although there is inconsistency with the use of the parameter to predict the direction of a corrosion inhibition reaction in literature; however, it is well known that the adsorption of polar molecules with more values of µ on the surface of the electrode should enhance inhibition performance.
The distribution of HOMO and LUMO orbitals can also be used to investigate how the chemical structure is adsorbed on the immersed electrode surface. The distribution of the HOMO and LUMO orbitals for the under-studied molecules is shown in Table S3. From the distribution of the HOMO and LUMO orbitals of all molecules, it can be concluded that the HOMO orbitals are more focused on double-bonded carbon atoms (C=C) and oxygen atoms. As a result, this portion of the molecule is adsorbed to the immersed electrode surface.
Conclusion
-
1.
Electrochemical analyses revealed that aqueous extracts of Wormwood, Maurorum, Yarrow, R. rubrum, and Marjoram herbal plants are suitable NIs for MS in 1M HCl electrolyte and their efficiencies increase with dosage in the order of Marjoram > Yarrow > Wormwood > Maurorum > R. rubrum.
-
2.
The highest inhibition performance belonged to the Marjoram extract with an inhibition efficiency of about 92%.
-
3.
The obtained results from the adsorption isotherm investigations proved that the adsorption of the organic compounds in the Marjoram extract acted as a mixed-type NI and obeyed the Langmuir model.
-
4.
It was demonstrated that the organic compounds formed a protective layer on the electrode surface via physicochemical interactions.
-
5.
UV–Vis and FE-SEM results confirmed the adsorption of the NI from the corrosive electrolyte on the MS surface.
-
6.
DFT computation showed that the oxygen atoms and π-bonds are suitable sites for sharing their lone pair electrons with empty iron orbitals on the soaked MS surface.
Data availability
All data generated or analysed during this study are included in this published article [and its supplementary information files].
References
Koch, G. H., Brongers, M. P. H., Thompson, N. G., Virmani, Y. P. & Payer, J. H. Corrosion Costs and Preventive Strategies in the United States (2002, accessed 25 Feb 2019). https://www.nace.org/uploadedfiles/publications/ccsupp.pdf.
Javidparvar, A. A., Ramezanzadeh, B. & Ghasemi, E. A review on the sol-gel based coatings used for the protection of metal substrates against corrosion. J. Stud. Color World 5, 31–44. https://doi.org/10.1515/amm-2017-0021 (2014).
Saji, V. S. A review on recent patents in corrosion inhibitors. Recent Patents Corros. Sci. 2, 6–12. https://doi.org/10.2174/1877610801002010006 (2010).
Tamalmani, K. & Husin, H. Review on corrosion inhibitors for oil and gas corrosion issues. Appl. Sci. 10, 3389. https://doi.org/10.3390/app10103389 (2020).
Gupta, R. K. et al. Functionalized graphene oxide as a new generation corrosion inhibitor for industrial pickling process: DFT and experimental approach. Mater. Chem. Phys. 236, 121727. https://doi.org/10.1016/j.matchemphys.2019.121727 (2019).
Nadi, I. et al. Sargassum muticum extract based on alginate biopolymer as a new efficient biological corrosion inhibitor for carbon steel in hydrochloric acid pickling environment: Gravimetric, electrochemical and surface studies. Int. J. Biol. Macromol. 141, 137–149. https://doi.org/10.1016/J.IJBIOMAC.2019.08.253 (2019).
Dariva, C. G. & Galio, A. F. Corrosion inhibitors-principles, mechanisms and applications. Dev. Corros. Protect. 2014, 365–379. https://doi.org/10.5772/57255 (2014).
Fateh, A., Aliofkhazraei, M. & Rezvanian, A. R. Review of corrosive environments for copper and its corrosion inhibitors. Arab. J. Chem. https://doi.org/10.1016/J.ARABJC.2017.05.021 (2017).
Fajobi, M. A., Loto, T. R. & Oluwole, O. O. Austenitic 316L stainless steel corrosion and organic inhibitor: A review. Key Eng. Mater. 886, 126–132. https://doi.org/10.4028/www.scientific.net/KEM.886.126 (2021).
Bogumił, E. B., Iwona, H. K., Adrianna, S., Olga, K. & Marta, P. Organic corrosion inhibitors. Corros. Inhibit. Principles Recent Appl. 2018, 3–30 (2018).
Sangeetha, M., Rajendran, S., Muthumegala, T. S. & Krishnaveni, A. Green corrosion inhibitors—an overview. Zastita Mater. 52, 3–19 (2011).
Peter, A. & Sanjay, I. B. O. Use of natural gums as green corrosion inhibitors: An overview. Int. J. Ind. Chem. 6, 153–164. https://doi.org/10.1007/s40090-015-0040-1 (2015).
Kesavan, D., Gopiraman, M. & Sulochana, N. Green inhibitors for corrosion of metals: A review correspondence. Chem. Sci. Rev. Lett. 1, 1–8 (2012).
Salhi, A., Bouyanzer, A., Chetouani, A., Hammouti, B. & Desjobert, J. M. Chemical composition, antioxidant and anticorrosion activities of Mentha Suaveolens. J. Mater. Environ. Sci. 8, 1718–1728 (2017).
Naghi-Tehrani, M. E. H., Ghahremani, P., Ramezanzadeh, M., Bahlakeh, G. & Ramezanzadeh, B. Theoretical and experimental assessment of a green corrosion inhibitor extracted from Malva sylvestris. J. Environ. Chem. Eng. 2021, 9. https://doi.org/10.1016/J.JECE.2021.105256 (2021).
Nouri, P. M. & Attar, M. M. An imidazole-based antifungal drug as a corrosion inhibitor for steel in hydrochloric acid. Chem. Eng. Commun. 203, 505–515. https://doi.org/10.1080/00986445.2015.1039122 (2016).
Yee, Y. P., Saud, S. N. & Hamzah, E. Pomelo peel extract as corrosion inhibitor for steel in simulated seawater and acidic mediums. J. Mater. Eng. Perform. 29, 2202–2215. https://doi.org/10.1007/s11665-020-04774-1 (2020).
Jakubczyk, K., Janda, K., Szkyrpan, S., Gutowska, I. & Wolska, J. Stinging nettle (Urtica dioica L.) – botanical characteristics, biochemical composition and health benefits. Pomeran. J. Life Sci. 61, 191–198. https://doi.org/10.21164/POMJLIFESCI.78 (2015).
Nasibi, M. et al. Corrosion inhibition of mild steel by Nettle (Urtica dioica L.) extract: Polarization, EIS, AFM, SEM and EDS studies. J. Adhes. Sci. Technol. 27, 1873–1885. https://doi.org/10.1080/01694243.2013.764144 (2013).
Mousavi, S. M. et al. A review on health benefits of Malva sylvestris L. Nutritional compounds for metabolites, antioxidants, and anti-inflammatory, anticancer, and antimicrobial applications. Evid. Based Complement Alternat. Med. 2021, 13. https://doi.org/10.1155/2021/5548404 (2021).
Abayechaw, D. & Yoseph, T. Review on health benefits of spearmint (Mentha spicata L.) and its inter-cropping advantage with maize (Zea mays L.). Nutr. Food Process. 4, 1–6. https://doi.org/10.31579/2637-8914/060 (2021).
Badgujar, S. B., Patel, V. V. & Bandivdekar, A. H. Foeniculum vulgare Mill: A review of its botany, phytochemistry, pharmacology, contemporary application, and toxicology. Biomed. Res. Int. 2014, 145. https://doi.org/10.1155/2014/842674 (2014).
Lahhit, N. et al. Fennel (Foeniculum vulgare) essential oil as green corrosion inhibitor of carbon steel in hydrochloric acid solution, Portugaliae. Electrochim. Acta. 29, 127–138. https://doi.org/10.4152/PEA.201102127 (2011).
Bouoidina, A. et al. Essential oil of “Foeniculum vulgare”: Antioxidant and corrosion inhibitor on mild steel immersed in hydrochloric medium. Anti-Corros. Methods Mater. 64, 563–572. https://doi.org/10.1108/ACMM-10-2016-1716/FULL/XML (2017).
Nemeth, E. & Bernath, J. Biological activities of yarrow species (Achillea spp.). Curr. Pharm. Des. 14, 3151–3167. https://doi.org/10.2174/138161208786404281 (2008).
Bordean, M.-E., Muste, S., Muresan, V. & Buican, B.-C. Health effects of wormwood (Artemisia absinthium L.): From antioxidant to nutraceutical. J. Agroaliment. Process. Technol. 27, 211–218 (2021).
Ahmad, N. et al. Traditional uses and pharmacological properties of Alhagi maurorum: A review. Asian Pac. J. Trop. Dis. 5, 856–861. https://doi.org/10.1016/S2222-1808(15)60945-8 (2015).
Dhiman, N. & Bhasin, A. Marjoram (Origanum majorana): An essential oil with potential pharmacological properties and health benefits. Pharm. Innov. J. 11, 4454–4460 (2022).
Rizwana, H., Alwhibi, M. S., Al-Judaie, R. A., Aldehaish, H. A. & Alsaggabi, N. S. Sunlight-mediated green synthesis of silver nanoparticles using the berries of Ribes rubrum (red currants): Characterisation and evaluation of their antifungal and antibacterial activities. Molecules 27, 2186. https://doi.org/10.3390/MOLECULES27072186 (2022).
Kohn, W. & Sham, L. J. Self-consistent equations including exchange and correlation effects. Phys. Rev. 140, A1133. https://doi.org/10.1103/PHYSREV.140.A1133/FIGURE/1/THUMB (1965).
Tomasi, J., Mennucci, B. & Cammi, R. Quantum mechanical continuum solvation models. Chem. Rev. 105, 2999–3093. https://doi.org/10.1021/CR9904009/ASSET/CR9904009.FP.PNG_V03 (2005).
Obot, I. B. & Gasem, Z. M. Theoretical evaluation of corrosion inhibition performance of some pyrazine derivatives. Corros. Sci. 83, 359–366. https://doi.org/10.1016/J.CORSCI.2014.03.008 (2014).
Awad, M. K., Mustafa, M. R. & Elnga, M. M. A. Computational simulation of the molecular structure of some triazoles as inhibitors for the corrosion of metal surface. J. Mol. Struct. Theochem. 959, 66–74. https://doi.org/10.1016/J.THEOCHEM.2010.08.008 (2010).
Leyva-López, N., Gutiérrez-Grijalva, E. P., Vazquez-Olivo, G. & Heredia, J. B. Essential oils of oregano: Biological activity beyond their antimicrobial properties. Molecules 2017, 22. https://doi.org/10.3390/molecules22060989 (2017).
Singh, L., Singh-Samra, K. & Singh, R. Opto-chemical response of CR-39 and polystyrene to swift heavy ion irradiation. Nucl. Instrum. Methods Phys. Res. B 255, 350–356. https://doi.org/10.1016/j.nimb.2006.11.129 (2007).
Roshanghias, A., Sodeifian, G., Javidparvar, A. A. & Tarashi, S. Construction of a novel polytetrafluoroethylene-based sealant paste: The effect of polyvinyl butyral (PVB) and nano-alumina on the sealing performance and construction formulations. Results Eng. 14, 100460. https://doi.org/10.1016/J.RINENG.2022.100460 (2022).
Jung, M. R. et al. Validation of ATR FT-IR to identify polymers of plastic marine debris, including those ingested by marine organisms. Mar. Pollut. Bull. 127, 704–716. https://doi.org/10.1016/j.marpolbul.2017.12.061 (2018).
Zareyee, D. Cellulose nanocrystal supported palladium as a novel recyclable catalyst for Ullmann coupling reactions. Cellulose 26, 5015–5031. https://doi.org/10.1007/s10570-019-02436-7 (2019).
Javidparvar, A. A., Mosavi, M. A. & Ramezanzadeh, B. Nickel-aluminium bronze (NiBRAl) casting alloy tribological/corrosion resistance properties improvement via deposition of a Cu-doped diamond-like carbon (DLC) thin film; optimization of sputtering magnetron process conditions. Mater. Che.m Phys. 296, 127279. https://doi.org/10.1016/J.MATCHEMPHYS.2022.127279 (2023).
Mostafaei, A. & Nasirpouri, F. Epoxy/polyaniline-ZnO nanorods hybrid nanocomposite coatings: Synthesis, characterization and corrosion protection performance of conducting paints. Prog. Org. Coat. 77, 146–159. https://doi.org/10.1016/j.porgcoat.2013.08.015 (2014).
Shahmoradi, A. R., Talebibahmanbigloo, N., Javidparvar, A. A., Bahlakeh, G. & Ramezanzadeh, B. Studying the adsorption/inhibition impact of the cellulose and lignin compounds extracted from agricultural waste on the mild steel corrosion in HCl solution. J. Mol. Liq. 304, 112751 (2020).
Shahmoradi, A. R. et al. Theoretical and surface/electrochemical investigations of walnut fruit green husk extract as effective inhibitor for mild-steel corrosion in 1M HCl electrolyte. J. Mol. Liq. 338, 116550. https://doi.org/10.1016/J.MOLLIQ.2021.116550 (2021).
Asadi, N., Naderi, R. & Mahdavian, M. Synergistic effect of imidazole dicarboxylic acid and Zn2+ simultaneously doped in halloysite nanotubes to improve protection of epoxy ester coating. Prog. Org. Coat. 132, 29–40. https://doi.org/10.1016/j.porgcoat.2019.03.021 (2019).
Elmi, F., Valipour, E. & Ghasemi, S. Synthesis of anticorrosion nanohybrid films based on bioinspired dopamine, L-cys/CNT@PDA through self-assembly on 304 stainless steel in 35% NaCl. Bioelectrochemistry 126, 79–85. https://doi.org/10.1016/j.bioelechem.2018.11.012 (2019).
Mansfeld, F., Shih, H., Greene, H. & Tsai, C. Analysis of EIS data for common corrosion processes. In Electrochemical Impedance: Analysis and Interpretation, ASTM International 37–37 (1993). https://doi.org/10.1520/STP18062S.
Blin, F., Koutsoukos, P., Klepetsianis, P. & Forsyth, M. The corrosion inhibition mechanism of new rare earth cinnamate compounds–electrochemical studies. Electrochim. Acta 52, 6212–6220. https://doi.org/10.1016/j.electacta.2007.04.001 (2007).
Dehghani, A., Bahlakeh, G. & Ramezanzadeh, B. A detailed electrochemical/theoretical exploration of the aqueous Chinese gooseberry fruit shell extract as a green and cheap corrosion inhibitor for mild steel in acidic solution. J. Mol. Liquids https://doi.org/10.1016/j.molliq.2019.03.011 (2019).
Zhang, Z., Chen, S., Li, Y., Li, S. & Wang, L. A study of the inhibition of iron corrosion by imidazole and its derivatives self-assembled films. Corros. Sci. 51, 291–300. https://doi.org/10.1016/j.corsci.2008.10.040 (2009).
Aljourani, J., Raeissi, K. & Golozar, M. A. Benzimidazole and its derivatives as corrosion inhibitors for mild steel in 1M HCl solution. Corros. Sci. 51, 1836–1843. https://doi.org/10.1016/j.corsci.2009.05.011 (2009).
Ghanbari, A., Attar, M. M. & Mahdavian, M. Corrosion inhibition performance of three imidazole derivatives on mild steel in 1M phosphoric acid. Mater. Chem. Phys. 124, 1205–1209. https://doi.org/10.1016/j.matchemphys.2010.08.058 (2010).
Ayawei, N., Ebelegi, A. N. & Wankasi, D. Modelling and Interpretation of Adsorption Isotherms. J. Chem. 2017, 1–11. https://doi.org/10.1155/2017/3039817 (2017).
Aljourani, J., Golozar, M. A. & Raeissi, K. The inhibition of carbon steel corrosion in hydrochloric and sulfuric acid media using some benzimidazole derivatives. Mater. Chem. Phys. 121, 320–325. https://doi.org/10.1016/j.matchemphys.2010.01.040 (2010).
Khaled, K. F. The inhibition of benzimidazole derivatives on corrosion of iron in 1 M HCl solutions. Electrochim. Acta 48, 2493–2503. https://doi.org/10.1016/S0013-4686(03)00291-3 (2003).
Touir, R. et al. Comparative inhibition study of mild steel corrosion in hydrochloric acid by benzimidazole derivatives. J. Mater. Environ. Sci. 4, 921–930 (2013).
Ajmal, M., Mideen, A. S. & Quraishi, M. A. 2-hydrazino-6-methyl-benzothiazole as an effective inhibitor for the corrosion of mild steel in acidic solutions. Corros. Sci. 36, 79–84. https://doi.org/10.1016/0010-938X(94)90110-4 (1994).
Dehghani, A., Bahlakeh, G., Ramezanzadeh, B. & Ramezanzadeh, M. A combined experimental and theoretical study of green corrosion inhibition of mild steel in HCl solution by aqueous Citrullus lanatus fruit (CLF) extract. J. Mol. Liq. 279, 603–624. https://doi.org/10.1016/j.molliq.2019.02.010 (2019).
Alibakhshi, E. et al. Persian Liquorice extract as a highly efficient sustainable corrosion inhibitor for mild steel in sodium chloride solution. J. Clean. Prod. 210, 660–672. https://doi.org/10.1016/J.JCLEPRO.2018.11.053 (2019).
Mehdipour, M., Ramezanzadeh, B. & Arman, S. Y. Electrochemical noise investigation of Aloe plant extract as green inhibitor on the corrosion of stainless steel in 1M H2SO4. J. Ind. Eng. Chem. 21, 318–327. https://doi.org/10.1016/j.jiec.2014.02.041 (2015).
Yousefzadeh, S. et al. Modified hydroxyethyl cellulose as a highly efficient eco-friendly inhibitor for suppression of mild steel corrosion in a 15\% HCl solution at elevated temperatures (2023).
Salarvand, Z., Amirnasr, M., Talebian, M., Raeissi, K. & Meghdadi, S. Enhanced corrosion resistance of mild steel in 1 M HCl solution by trace amount of 2-phenyl-benzothiazole derivatives: Experimental, quantum chemical calculations and molecular dynamics (MD) simulation studies. Corros. Sci. 114, 133–145. https://doi.org/10.1016/J.CORSCI.2016.11.002 (2017).
Musa, A. Y., Jalgham, R. T. T. & Mohamad, A. B. Molecular dynamic and quantum chemical calculations for phthalazine derivatives as corrosion inhibitors of mild steel in 1 M HCl. Corros. Sci. 56, 176–183. https://doi.org/10.1016/J.CORSCI.2011.12.005 (2012).
Fatima, A. et al. Spectroscopic, molecular structure, electronic, Hirshfeld surface, molecular docking, and thermodynamic investigations of trans-4-hydroxy-L-proline by DFT method. J. Mol. Liq. 343, 117549. https://doi.org/10.1016/J.MOLLIQ.2021.117549 (2021).
Afroz, Z., Alam, M. J., Zulkarnain, M., Faizan, A. & Ahmad, S. A. DFT and TD-DFT computation of charge transfer complex between o-phenylenediamine and 3,5-dinitrosalicylic acid. AIP Conf. Proc. 1731, 090038. https://doi.org/10.1063/1.4948002 (2016).
Javidparvar, A. A., Naderi, R., Ramezanzadeh, B. & Bahlakeh, G. Graphene oxide as a pH-sensitive carrier for targeted delivery of eco-friendly corrosion inhibitors in chloride solution: Experimental and theroretical investigations. J. Ind. Eng. Chem. 72, 196–213. https://doi.org/10.1016/j.jiec.2018.12.019 (2019).
Bahlakeh, G., Ramezanzadeh, B. & Ramezanzadeh, M. Cerium oxide nanoparticles influences on the binding and corrosion protection characteristics of a melamine-cured polyester resin on mild steel: An experimental, density functional theory and molecular dynamics simulation study. Corros. Sci. 118, 69–83. https://doi.org/10.1016/J.CORSCI.2017.01.021 (2017).
Dehghani, A., Bahlakeh, G. & Ramezanzadeh, B. Designing a novel targeted-release nano-container based on the silanized graphene oxide decorated with cerium acetylacetonate loaded beta-cyclodextrin (β-CD-CeA-MGO) for epoxy anti-corrosion coating. Chem. Eng. J. https://doi.org/10.1016/j.cej.2020.125860 (2020).
Arash, S., Alibakhshi, E. & Bahlakeh, G. A detailed atomic level computational and electrochemical exploration of the Juglans regia green fruit shell extract as a sustainable and highly efficient green corrosion inhibitor for mild steel in 3.5 wt % NaCl solution. J. Mol. Liq. 284, 682–699. https://doi.org/10.1016/j.molliq.2019.04.045 (2019).
Haddadi, S. A., Alibakhshi, E., Bahlakeh, G., Ramezanzadeh, B. & Mahdavian, M. A detailed atomic level computational and electrochemical exploration of the Juglans regia green fruit shell extract as a sustainable and highly efficient green corrosion inhibitor for mild steel in 3.5wt% NaCl solution. J. Mol. Liq. 284, 682–699. https://doi.org/10.1016/J.MOLLIQ.2019.04.045 (2019).
Tabatabaei-majd, M., Bahlakeh, G., Dehghani, A., Ramezanzadeh, B. & Ramezanzadeh, M. Combined molecular simulation, DFT computation and electrochemical studies of the mild steel corrosion protection against NaCl solution using aqueous Eucalyptus leaves extract molecules linked with zinc ions. J. Mol. Liq. 294, 111550. https://doi.org/10.1016/J.MOLLIQ.2019.111550 (2019).
Ramezanzadeh, B., Kardar, P., Bahlakeh, G., Hayatgheib, Y. & Mahdavian, M. Fabrication of a highly tunable graphene oxide composite through layer-by-layer assembly of highly crystalline polyaniline nanofibers and green corrosion inhibitors: Complementary experimental and first-principles quantum-mechanics modeling approaches. J. Phys. Chem. C 121, 20433–20450. https://doi.org/10.1021/acs.jpcc.7b04323 (2017).
Sharafinia, S., Farrokhnia, A., Ghasemian-Lemraski, E. & Rashidi, A. Decoration of ZnFe2O4 and UiO-66 over g-C3N4 as magnetically novel reusable visible light photocatalyst for degradation of Rh–B. Opt. Mater. 132, 112838. https://doi.org/10.1016/j.optmat.2022.112838 (2022).
Sharafinia, S., Rashidi, A. & Esrafili, M. D. Optimized adsorption of volatile organic compounds on the activated carbon prepared from mesquite grain: A combined experimental and computational study. J. Environ. Chem. Eng. 10(6), 108528. https://doi.org/10.1016/j.jece.2022.108528 (2022).
Author information
Authors and Affiliations
Contributions
Maryam Pourmohseni: collected the data, Doing the lab work and collecting data, Contributed data or analysis tools, Performed the analysis, Wrote the paper. Alimorad Rashidi: Conceived and designed the analysis, Supervision, Contributed data or analysis tools, Lab work and materials, Supervision, Validation, Visualization, Performed the analysis, Wrote the paper, Revised and editing the manuscript with help the other authors, Other contribution, Corresponding Author. Mehrnoosh Karimkhani: Conceived and designed the analysis, Supervision, Contributed data or analysis tools, Lab work and materials, Validation, Visualization, Performed the analysis.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Pourmohseni, M., Rashidi, A. & Karimkhani, M. Preparation of corrosion inhibitor from natural plant for mild stil immersed in an acidic environmental: experimental and theoretical study. Sci Rep 14, 7937 (2024). https://doi.org/10.1038/s41598-024-58637-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-024-58637-z
- Springer Nature Limited