Abstract
Colloidal particles in nematic liquid crystals create elastic distortion and experience long-range forces. The symmetry of elastic distortion and consequently the complexity of interaction strongly depends largely on the liquid crystal anchoring, topology and shape of the particles. Here, we introduce a new nematic colloidal system made of peanut-shaped hematite particles. We report experimental studies on spontaneous orientation, mutual interaction, laser assisted self-assembly and the effect of external magnetic fields on the colloids. Majority of the colloids spontaneously orient either parallel or perpendicular to the nematic director. The colloids that are oriented perpendicularly exhibit two types of textures due to the out of plane tilting, which is corroborated by the Landau-de Gennes Q-tensor modelling. The transverse magnetic moment of the peanut-shaped colloids is estimated by using a simple analysis based on the competing effects of magnetic and elastic torques.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Introduction
Colloidal particles dispersed in anisotropic solvents such as liquid crystals (LCs) are a fascinating class of soft matter. There has been a surge of activity in this field ranging from fundamental to applied issues1,2,3,4,5,6. The dispersed particles experience elastic forces which are very different than their counterparts in isotropic fluids. The forces are long-range, anisotropic and depend on the symmetry of the elastic distortion created by the particles. The competition between the uniform director field (average direction of molecular orientation) and anchoring on the surface leads to the induction of topological defects in the vicinity of the particles7,8,9,10,11,12,13. In case of spherical colloids the defects appear as points or rings depending on the type and strength of surface anchoring and confinement13,14. The colloids together with defects are known as elastic dipoles or quadrupoles, based on the similarity of the director fields with their electric counterparts4. In addition, other kinds of defects such as boojums15,16 and vortex17,18 are also observed in different anchoring and confinement conditions. Based on the interplay of elastic interaction and topological defects a variety of self-assembled structures such as chains3, two and three dimensional crystals6,8, entangled clusters9,19, knotted and linked colloids19,20,21,22 are reported. It has been shown that the symmetry of the elastic interaction and the resulting colloidal assembly can be markedly different due to the the shape of the colloids. In fact there are several reports on the induced defect and complex interaction of nonspherical microparticles such as rod-shaped11,23, star-shaped24, rectangular25,26, triangular27, square, bullet28 and doughnut-shaped27 in nematic crystals.
The self-assembly of magnetic colloids that can be controlled or manipulated by external magnetic field is very promising and comparatively less explored than nonmagnetic colloids. Brochard and de Gennes first theoretically studied the magnetic particles in nematics and proposed the idea of a ferronematic29. Lately there are several experimental studies on magnetic microparticles30,31, nanowires32,33 and nanoparticles in nematic liquid crystals34,35,36. However, after the discovery of true ferronematic by Mertelj et al.37, it has created immense interests38,39,40. Here we introduce a new nematic colloidal system –peanut-shaped hematite colloids in nematic liquid crystals. The assembly and interactions of these particles have been studied in aqueous medium. They interact via dipolar interaction and also experience a magnetic torque under the influence of external magnetic field. In isotropic solvents like water they exhibit complex self-assembled and ordered structures41,42. It is expected that in anisotropic solvent such as in nematic liquid crystals we can engender the diversity of the interaction, orientation and hence the self-assembly of the peanut-shaped colloids by exploiting the combined effect of magnetic and elastic interactions. The elastic interaction is a consequence of elastic distortion that is primarily governed by its shape. A peanut shape benefits from anisotropic interactions, while retaining smooth sphere-like geometry on both ends, which helps in formation of regular chains and lattices. With this aim we study spontaneous orientation, induced defects, anisotropic elastic interactions, directed self-assembly and magnetically driven rearrangement of peanut-shaped magnetic colloids. The microscopic textures due to the elastic distortion are simulated by the Landau-de Gennes Q-tensor modelling. By balancing the liquid crystal imposed forces with applied magnetic field we determine the elastic torque which leads to the quantitative measurement of the magnetic dipole moment of the peanut-shaped particles.
Results and Discussion
The particles are first characterised by scanning electron microscope (SEM). Fig. 1(a) shows a SEM micrograph of the peanut-shaped hematite particles. The average length and the lobe diameter of these particles are about 3.2 μm and 1.54 μm respectively. The mixture of peanut-shaped colloids and 5CB is introduced in planar cells. Figure 1(b) shows a texture with a few dispersed colloids taken by polarising optical microscope (POM). It is observed that the colloids orient themselves with their long axis at all possible angles with respect to the nematic director, \(\hat{n}\). The statistical analysis of orientation of about 250 particles is shown in Fig. 1(c). About 35% colloids are oriented perpendicular to the director and 13% are oriented parallel to the director. The remaining colloids are oriented at all other angles (0o < θ < 90°). This possibly indicates a slight differences in anchoring strength of the particles.
The elastic distortion of a few isolated colloids which are either parallel or perpendicular to the director are investigated with a 60× objective and numerical aperture (NA) of 1.1. To get qualitative information about the anchoring and the induced defects, a retarder wave plate (530 nm) was introduced into the optical path between the polariser and the sample stage making the fast axis 45° with respect to the director and the corresponding image is shown in Fig. 2(b). The molecules, parallel or perpendicular to the slow axis of the wave plate, transmit blue or yellow colour representing the clockwise or anticlockwise orientation with respect to the director, respectively.
Figure 2(a) shows the POM micrograph of a particle oriented parallel to the director. It induces a hyperbolic hedgehog point defect and elastic distortion similar to that of spherical micro-particles, excepting the presence of another point defect between them (see Fig. 2(d)). The point defect is slightly extended, possibly due to the shape or the aspect ratio of the particle. A schematic diagram of the director field around the particle is shown in Fig. 2(c).
POM micrographs of two particles oriented perpendicular to the director are shown in Fig. 2(e,i). Unlike the colloids that are oriented parallel to the director, the defects in this case are not easily identifiable. They exhibit two different retardation profiles when observed under λ-plate. In type-I, a typical sequence of blue and yellow colours that surrounds the particles (similar to that is observed in case of spherical colloids) suggests homeotropic anchoring of the liquid crystal molecules (Fig. 2(f)). Figure 2(g) shows the corresponding simulated image, where the particle is surrounded by a −1/2 disclination ring (Saturn ring) around its larger perimeter. The surrounding elastic distortion resembles to that of a pair of quadrupolar colloids except the concave surface around the neck. The λ-plate image of a type-II colloid shown in Fig. 2(j) is noticably different than that of type-I (Fig. 2(f)) though their POM images look similar (Fig. 2(e,i)). Careful observation shows that not all the particles that are oriented perpendicular to the director appear to have same length while dispersed in liquid crystals (Fig. 1(b)). The type-II colloids appear somewhat smaller than that of type-I, suggesting that the type-II colloids are tilted with respect to the plane of the cell. Based on this idea we carried out computer simulation for different tilt angles and vertical particle positions. Figure 2(k) shows the corresponding simulated λ-plate image of the tilted particle associated with the Saturn ring defect where the upper part of the particle is tilted 45o out of the plane of paper and the lower part is set close to the bottom glass plate. In this configuration, the blue and yellow colour coincides best with that of the experiment (Fig. 2(f)). This suggests that the type-II relies on the interaction with the cell walls for stability, while the type-I is floating in the bulk. We have also done a statistical analysis of the two types of particle configurations. Fig. 3(a) shows that among the particles that are oriented perpendicular to the director nearly 70% are type-II i.e., tilted and remaining 30% are parallel to the glass plate. However, the orientation of the particles can be changed from parallel to perpendicular or from type-I to type-II or vice versa by using the optical tweezer as shown in Fig. 3(b–d).
The elastic interaction between two particles is studied using a video microscopy technique. Two dipolar colloids are brought a few micrometers apart with the help of the optical tweezer and left free to evolve. Figure 4(a) shows the variation of separation R(t) between two colloids with time. In this case, the attractive elastic force (Fe) is balanced by the viscous drag force acting opposite to Fe, hence Fe + Fdrag = 0, where Fdrag = −ζdR(t)/dt, ζ being the drag coefficient. The interaction force between two dipolar colloids is given by Fe = −k/R4, where k is a constant and depends on the mean elastic constant of the medium, size and shape of the particles. The time dependent inter-particle separation is given by \(R(t)={(R{\mathrm{(0)}}^{5}-5\alpha t)}^{\mathrm{1/5}}\), where α = K/ζ and R(0) is the initial separation at t = 0 s43. The red line in Fig. 4(a) shows the best fit to the experimental data. Figure 4(b) shows time coded trajectories of a particle when it approaches another particle from different angles with parallel orientation of their dipolar axes. They have attractive interaction within about ±30° angle along the joining line and repulsive at other angles. When the dipolar particles approach along the broad-side on position with opposite orientations (Fig. 5(a)), they exhibit repulsive interaction within ±45° with respect to the joining line and attractive at other angles (see Fig. 5(b)). The overall anisotropic interaction of two peanut-shaped colloids are almost similar to that of spherical colloids except the numerical values of the interaction time and the range.
Pairs of perpendicular colloids (both types) show quadrupolar interaction (i.e Fe = −k/R6). Figure 6(a) shows the variation of inter-particle separation with the best fit to the corresponding equation, \(R(t)={(R{\mathrm{(0)}}^{7}-7\alpha t)}^{\mathrm{1/7}}\). Figure 6(b) shows that except along the joining line of two colloids, they have attractive but short-range interaction. We prepared linear chains with a few colloids using the optical tweezer. Figure 7(a,b) shows self-assembled chains of peanut-shaped colloids with dipolar and quadrupolar defect configurations. The dipolar chain is oriented parallel to the director and the quadrupolar chain is oriented perpendicular to the director. Two orthogonal chains are guided by the laser tweezer to combine and form a L-shaped structure (Fig. 7(c)). This can be used as a building block for making complex colloidal self-assembled structures, which are responsive to external magnetic field. It may be mentioned that the orthogonal orientation of colloidal chains of spherical particles are not stable in nematic liquid crystals.
We studied the effect of external magnetic field on the orientation and defects of dipolar colloids and estimated the magnetic dipole moment from the competing effects of elastic and magnetic torques. Two thick, disc-shaped magnets of diameter 20 mm were placed diametrically opposite in a circular track around the microscope objective, keeping the cell at the centre. This arrangement produces a uniform magnetic field with a fixed amplitude at the sample, which depends on the diameter of the circular track. The direction of magnetic field is changed by rotating the two magnets simultaneously in the track. The magnetic field at the centre is calibrated by a magnetometer. Figure 8(a–e) shows the effect of rotating magnetic field of strength 300 gauss on a dipolar colloid. Since the diamagnetic anisotropy of 5CB liquid crystal is very small the applied magnetic field does not have any effect on the orientation of the director. The orientation of the particle remains unaffected when the magnetic field is perpendicular to the long axis. As the magnetic field is rotated from 90° to 0°, the colloid rotates, keeping the point defect facing toward the rubbing direction. This suggests that the direction of magnetic moment is perpendicular to the length of the colloids. Figure 8(f) shows the response of the colloid when the magnetic field is rotated from +90° to −90° (right to left). Below ±30° the colloid tilts out of the observation plane. At ϕ = 0°, the tilt angle reaches maximum and the particle flips its direction from anti-clockwise to clock-wise.
To calculate the magnetic torque on the colloid we present a simple diagram in Fig. 9(a). It shows an equilibrium orientation of the colloid when the magnetic field is applied at an angle ϕ with respect to the director. The long axis of the colloid makes an angle α with respect to the director. The angle of the magnetic moment with respect to the director is θ. At equilibrium the magnetic toque μB sin(ϕ − θ) is balanced with the gradient of elastic energy \(-(\partial U/\partial \theta )\) and the torque balance equation is written as32:
According to Brochard and de Gennes the elastic energy of an elongated particle in liquid crystals can be written in analogy with the electrostatic energy at a fixed potential and is given by \(U=2\pi CK{\theta }^{2}\), where K is average Frank elastic constant and \(C=L/2\,\mathrm{log}(L/d)\) is the capacitance of the particle of length L and diameter d29. Thus, from Eq. (1) we get, \(\mu B\,\sin (\varphi -\theta )=4\pi CK\theta \). The variation of \(B\,\sin (\varphi -\theta )\) with θ is shown in Fig. 9(b). The magnetic torque varies linearly but in a periodic manner and at θ = 0°, it changes direction. The slope of the best fit is given by \(4\pi CK/\mu =190\) gauss/radians (Fig. 9(c)). Taking \(K\simeq 5\times {10}^{-7}\,{\rm{d}}{\rm{y}}{\rm{n}}\) and \(C\simeq 5\times {10}^{-4}\,{\rm{cm}}\), the estimated magnetic dipole moment \(\mu \simeq 1.7\times {10}^{-11}\) emu. This is very close to the value reported by Lee et al. from an independent measurement of bulk sample44.
We also studied the effect of magnetic field on a self-assembled dipolar chain structure. Figure 10(a–h) shows a few textures of a dipolar chain, when the magnetic field is rotated around the director. The angle between the director, \(\hat{n}\) and magnetic field, \(\overrightarrow{B}\) is ϕ. The chain remains straight when the magnetic field \(\overrightarrow{B}\) is perpendicular to the length of the chain, i.e., ϕ = 90°. The chain as a whole, tends to reorient and the colloids slide over each other as ϕ is decreased from 90°. The sliding is associated with a slight displacement of the point defects from their initial positions. Consequently the length becomes shorter and finally the chain flips its direction at ϕ = 0°. Director structures for two orientations are schematically shown in Fig. 10(i,j) respectively.
Conclusions
In summary, peanut-shaped hematite microparticles spontaneously orient at various angles with respect to the nematic director exhibiting both dipolar and quadrupolar symmetry of elastic distortion. Among the quadrupolar colloids majority of them are tilted with respect to the plane of the cell, which has been corroborated by the computer simulation results obtained from Landau-de Gennes Q-tensor modelling. The elastic interactions are highly anisotropic and short-ranged compared to that of a pair of spherical colloids. The dipolar and quadrupolar linear chains are combined with the help of a laser tweezer to form a stable structure retaining their orthogonal orientations. The colloids have transverse magnetic dipole moments and hence their orientations are manipulated in the liquid crystal by the applied external magnetic field. The estimated magnetic moment obtained from the competing effects of elastic and magnetic torques is about 1.7 × 10−11 emu. Magnetic colloids with anisotropic shape have a potential use for making magnetic field responsive complex self-assembling colloids, as demonstrated on magnetically rearranging linear chain of particles. Peanut shape is structurally very similar to a pair of spherical particles, bound at a fixed distance, so the particles could also be used in a mixture of spherical and peanut-shaped particles to functionalize the particle assembly with magnetic response.
Experimental Methods
The peanut-shaped hematite particles (α-Fe2O3) were synthesised based on the previously established gel-sol method45. They can be produced in large quantity and they are well characterised41,42,44,45. The particles were dispersed in 4-cyano-4′ pentylbiphenyl (5CB) liquid crystal without any surface treatment for the anchoring of liquid crystal molecules. Cells with spacing in the range of 8–10 μm were fabricated using glass plates, spin coated with polyimide, AL-1254 and cured at 180o. The glass plates were rubbed along a particular direction and then fixed using a UV curable optical adhesive mixed with the desired spacer. Prepared cells provide planar orientation of liquid crystal director along the rubbing direction. The LC-colloid mixture was introduced into the cells by capillary action and the textures were observed using an inverted polarising optical microscope. A laser tweezer operating at 1064 nm, is built on the same inverted microscope (Nikon eclipse Ti-U). An acousto-optic deflector was used for optical trap and hence colloid manipulation. The motion of the particle was video recorded using a CCD camera (Pixelink PLB 741F) and an appropriate software was used to track the time dependent positions of the particles46,47,48. All the experiments were performed at a temperature of 30 °C.
Numerical Simulation
Numerical simulations were done with a finite difference scheme based on a Landau-de Gennes Q-tensor free energy density model with equal elastic constants in the form7:
and surface free energy term \({f}_{S}=\frac{1}{2}W{({Q}_{ij}-{Q}_{ij}^{0})}^{2}\) with \({Q}_{ij}^{0}\) being the preferred Q-tensor consistent with the director pointing along the particle surface normal. The elastic constants are set to the well-tested set for simulating 5CB liquid crystals: L = 8 × 10−12 J, A = −0.172 MJ/m3, B = −2.12 MJ/m3, C = 1.73 MJ/m3, and relatively weak anchoring W = 1.0 × 10−3 J/m2. The simulations were done for particle dimensions 1.0 × 0.5 × 0.5 μm with computational grid resolution of 10 nm in a 300 × 300 × 300 simulation box. The particle size is smaller than in experimental setting, to make the computation feasible. However, as long as the defects are in the same positions as in the experiments, the director field is scale-independent, making the simulations suitable for reproducing the optical micrographs. The simulations of the crossed polarizer micrograph with an inserted retarder plate were performed using the Jones matrix formalism.
References
Poulin, P., Raghunathan, V. A., Richetti, P. & Roux, D. On the dispersion of latex particles in a nematic solution. J.Phys. II 4, 1557 (1994).
Ramaswamy, S., Nityananda, R., Raghunathan, V. A. & Prost, J. Power-law forces between particles in a nematic. Mol. Cryst. Liq. Cryst. Sci. Technol., Sect. A 288, 175 (1996).
Poulin, P., Stark, H., Lubensky, T. C. & Weitz, D. A. Novel colloidal interactions in anisotropic fluids. Science 275, 1770 (1997).
Stark, H. Physics of colloidal dispersions in nematic liquid crystals. Phys. Rep. 351, 387 (2001).
Lubensky, T. C., Pettey, D., Currier, N. & Stark, H. Topological defects and interactions in nematic emulsions. Phys. Rev. E 57, 610 (1998).
Muševič, I., Škarabot, M., Tkalec, U., Ravnik, M. & Žumer, S. Two-dimensional nematic colloidal crystals self-assembled by topological defects. Science 313, 954 (2006).
Ravnik, M. & Žumer, S. Landau-de Gennes modelling of nematic liquid crystal colloids. Liq. Cryst. 36, 1201 (2009).
Nych, A. et al. Assembly and control of 3D nematic dipolar colloidal crystals. Nat. Commun. 4, 1489 (2013).
Ravnik, M. et al. Entangled nematic colloidal dimers and wires. Phys. Rev. Lett. 99, 247801 (2007).
Wood, T. A., Lintuvuori, J. S., Schofield, A. B., Marenduzzo, D. & Poon, W. C. K. A Self-quenched defect glass in a colloid-nematic liquid crystal composite. Science 334, 79 (2011).
Tkalec, U., Škarabot, M. & Muševič, I. Interactions of micro-rods in a thin layer of a nematic liquid crystal. Soft Matter 4, 2402 (2008).
Loudet, J. C. & Poulin, P. Application of an electric field to colloidal particles suspended in a liquid-crystal solvent. Phys. Rev. Lett. 87, 165503 (2001).
Muševič, I. Liquid Crystal Colloids (Springer International Publishing, Switzerland, 2017).
Škarabot, M. et al. Interactions of quadrupolar nematic colloids. Phys. Rev. E 77, 031705 (2008).
Liu, Q., Senyuk, B., Tasinkevych, M. & Smalyukh, I. I. Nematic liquid crystal boojums with handles on colloidal handlebodies. Proc. Natl. Acad. Sci. USA 110, 9231 (2013).
Zuhail, K. P. & Dhara, S. Temperature dependence of equilibrium separation and lattice parameters of nematic boojum-colloids. Appl. Phys. Lett. 106, 211901 (2015).
Zuhail, K. P. & Dhara, S. Effect of temperature and electric field on 2D nematic colloidal crystals stabilised by vortex-like topological defects. Soft Matter 12, 6812 (2016).
Tkalec, U. & Muševič, I. Topology of nematic liquid crystal colloids confined to two dimensions. Soft Matter 9, 8140 (2013).
Tkalec, U., Ravnik, M., Čopar, S., Žumer, S. & Muševič, I. Reconfigurable knots and links in chiral nematic colloids. Science 333, 62 (2011).
Martinez, A. et al. Mutually tangled colloidal knots and induced defect loops in nematic fields. Nat. Materials 13, 258 (2014).
Martinez, A., Hermosillo, L., Tasinkevych, M. & Smalyukh, I. I. Linked topological colloids in a nematic host. Proc. Natl. Acad. Sci. USA 112, 4546 (2015).
Machon, T. & Alexander, G. P. Knots and nonorientable surfaces in chiral nematics. Proc. Natl. Acad. Sci. USA 110, 14174 (2013).
Andrienko, D., Allen, M. P., Skačej, G. & Žumer, S. Defect structures and torque on an elongated colloidal particle immersed in a liquid crystal host. Phys. Rev. E 65, 041702 (2002).
Lapointe, C. P., Mayoral, K. & Mason, T. G. Star colloids in nematic liquid crystals. Soft Matter 9, 7843 (2013).
Rasna, M. V., Zuhail, K. P., Ramudu, U. V., Chandrasekar, R. & Dhara, S. Dynamics of electro-orientation of birefringent microsheets in isotropic and nematic liquid crystals. Phy. Rev. E 94, 032701 (2016).
Rasna, M. V. et al. Orientation, interaction and laser assisted self-assembly of organic single-crystal micro-sheets in a nematic liquid crystal. Soft Matter 11, 7674 (2015).
Senyuk, B. et al. Topological colloids. Nature (London) 493, 200 (2013).
Gharbi, M. A. et al. Microbullet assembly: interactions of oriented dipoles in confined nematic liquid crystal. Liq. Cryst. 40, 1619 (2013).
Brochard, F. & de Gennes, P. G. Theory of magnetic suspensions in liquid crystals. J. Physics (Paris) 31, 691 (1970).
Michael, C., Varney, M., Nathan, J. J. & Smalyukh, I. I. Geometrically unrestricted, topologically constrained control of liquid crystal defects using simultaneous holonomic magnetic and holographic optical manipulation. Phys. Rev. E 89, 022505 (2014).
Michael, C., Varney, M., Zhang, Q. & Smalyukh, I. I. Stick-slip motion of surface point defects prompted by magnetically controlled colloidal-particle dynamics in nematic liquid crystals. Phys. Rev. E 91, 052503 (2015).
Lapointe, G. et al. Elastic torque and the levitation of metal wires by a nematic liquid crystal. Science 303, 652 (2004).
Lapointe, G., Cappallo, N., Reich, D. H. & Leheny, R. L. Static and dynamic properties of magnetic nanowires in nematic fluids. J. Phys. Appl. 97, 10Q304 (2005).
Chen, S. H. & Amer, N. Observation of macroscopic collective behavior and new texture in magnetically doped liquid crystals. Phys. Rev. Lett. 51, 2298 (1983).
Cruz, C. D., Sandre, O. & Cabuil, V. Phase behavior of nanoparticles in a thermotropic liquid crystal. J. Phys. Chem. B 109, 14292 (2005).
Lagerwall, J. P. F. & Scalia, G. Liquid crystals with nano and microparticles, (World Scientific Publishing Co. Singapore, 2017).
Mertelj, A., Lisjak, D., Drofenik, M. & Čopič, M. Ferromagnetism in suspensions of magnetic platelets in liquid crystal. Nature 504, 237 (2013).
Sahoo, R., Rasna, M. V., Lisjak, D., Mertelj, A. & Dhara, S. Magnetodielectric and magnetoviscosity response of a ferromagnetic liquid crystal at low magnetic fields. Appl. Phys. Lett. 106, 161905 (2015).
Mur, M. et al. Magnetic-field tuning of whispering gallery mode lasing from ferromagnetic nematic liquid crystal microdroplets. Opt. Express 25, 1073 (2017).
Liu, Q., Ackerman, P. J., Lubensky, T. C. & Smalyukh, I. I. Biaxial ferromagnetic liquid crystal colloids. Proc. Natl. Acad. Sci. USA 113, 10479 (2016).
Lee, S. H. et al. Synthesis and assembly of nonspherical hollow silica colloids under confinement. J. Mater. Chem. 18, 4912 (2008).
Lee, S. H., Song, Y., Hosein, I. D. & Liddell, C. M. Magnetically responsive and hollow colloids from nonspherical core-shell particles of peanut-like shape. J. Mater. Chem. 19, 350 (2009).
Poulin, P., Cabuil, V. & Weitz, D. A. Direct measurement of colloidal forces in an anisotropic solvent. Phys. Rev. Lett. 79, 4862 (1997).
Lee, S. H. & Liddell, C. M. Anisotropic magnetic colloids: A strategy to form complex structures using nonspherical building blocks. Small 5, 1957 (2009).
Anjali, T. G. & Basavaraj, M. G. Contact angle and detachment energy of shape anisotropic particles at fluid-fluid interfaces. J. Coll. Inter. Sci. 478, 63–71 (2016).
Zuhail, K. P. et al. Topological defect transformation and structural transition of two-dimensional colloidal crystals across the nematic to smectic-A phase transition. Phys. Rev. E 91, 030501(R) (2015).
Zuhail, K. P., Čopar, S., Muševič, I. & Dhara, S. Spherical microparticles with Saturn ring defects and their self-assembly across the nematic to smectic-A phase transition. Phys. Rev. E 92, 052501 (2015).
Rasi, M., Zuhail, K. P., Roy, A. & Dhara, S. N-SmA-SmC phase transitions probed by a pair of elastically bound colloids. Phys. Rev E 97, 032702 (2018).
Acknowledgements
We gratefully acknowledge the support from the Department of Science and Technology, Govt. of India (DST/SJF/PSA-02/2014-2015), and DST-PURSE. Dinesh Kumar acknowledge DST INSPIRE for support through a fellowship grant. S.Č. and J.A. acknowledge support by Slovenian Research Agency under grant P1-0099.
Author information
Authors and Affiliations
Contributions
Surajit Dhara conceived the idea and supervised the work. Dinesh Kumar Sahu performed the experiments. Colloids were synthesised by Thriveni G. Anjali and Madivala G. Basavraj. Computer simulations were performed by Jure Aplinc and Simon Copar. Results were discussed by all and the manuscript was prepared by Dinesh Kumar Sahu and Surajit Dhara.
Corresponding author
Ethics declarations
Competing Interests
The authors declare no competing interests.
Additional information
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Sahu, D.K., Anjali, T.G., Basavaraj, M.G. et al. Orientation, elastic interaction and magnetic response of asymmetric colloids in a nematic liquid crystal. Sci Rep 9, 81 (2019). https://doi.org/10.1038/s41598-018-36467-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-018-36467-0
- Springer Nature Limited
This article is cited by
-
Convergence to line and surface energies in nematic liquid crystal colloids with external magnetic field
Calculus of Variations and Partial Differential Equations (2024)