Abstract
Wall-climbing robots can work on steep terrain and obtain environment information in three dimensions for human in real time, which can improve operation efficiency. However, traditional single-mode robots cannot ensure the stable attachment on complex wall surfaces. Inspired by the structure characteristics of flies and clingfishes, three bionic structures including the flexible spine wheel, the adhesive material and the adsorption system are proposed. Aiming at task requirements on multiple walls and based on the above three bionic structures, a wall-climbing robot with the composed mode of “grabbing+adhesion+adsorption” is presented via the law of mechanism configuration synthesis. Using static analysis, the safe attachment conditions for the robot on smooth and rough walls are that the adsorption force is 30 N or more. Based on Newton’s Euler and Lagrange formulas, the dynamic equations of the robot on vertical walls are established to deduce that the maximum theoretical torque of the driving motor is 1.43 N·m at a uniform speed. Finally, the prototype of the wall-climbing robot is manufactured and tested on the vertical lime wall, coarse sandpaper wall and acrylic ceiling wall. Meanwhile, experiment results imply that the average maximum moving speed and the corresponding load are 7.19 cm·s−1 and 0.8 kg on the vertical lime wall, 7.78 cm·s−1 and 0.6 kg on the coarse sandpaper wall, and 5.93 cm·s−1 and 0.2 kg on the acrylic ceiling wall respectively. These findings could provide practical reference for the robot’s application on walls.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Liu Y W, Sun S M, Wu X, Mei T. A wheeled wall-climbing robot with bio-inspired spine mechanisms. Journal of Bionic Engineering, 2015, 12, 17–28.
Xu Z L, Ma P S. A wall-climbing robot for labeling scale of oil tank’s volume. Robotica, 2002, 20, 209–212.
Choi H R, Ryew S M, Kang T H, Lee J H, Kim H M. A wall climbing robot with closed link mechanism. Proceeding of International Conference on Intelligent Robotic Systems Conference, Takamatsu, Japan, 2000, 2006–2011.
Liu S L, Zhao Y Z, Gao X S, Xu D G, Wang Y. A wall climbing robot with magnetic crawlers for sand-blasting spray-painting and measurement. High Technology Letters, 2000, 9, 86–88. (in Chinese)
Schmidt D, Berns K. Climbing robots for maintenance and inspections of vertical structures - A survey of design aspects and technologies. Robotics & Autonomous Systems, 2013, 61, 1288–1305.
Chu B, Jung K, Han C S, Hong D. A survey of climbing robots: Locomotion and adhesion. International Journal of Precision Engineering & Manufacturing, 2010, 11, 633–647.
Grasso F W, Setlur P. Inspiration, simulation and design for smart robot manipulators from the sucker actuation mechanism of cephalopods. Bioinspiration & Biomimetics, 2007, 2, 170–181.
Zhu H F, Guan Y S, Wu W Q, Guan L M, Zhou X F, Zhang H. Autonomous pose detection and alignment of suction modules of a biped wall-climbing robot. IEEE/ASME Transactions on Mechatronics, 2015, 20, 653–662.
Li J, Gao X S, Fan N J, Li K J, Jiang Z H, Jiang Z J. Adsorption performance of sliding wall-climbing robot. Chinese Journal of Mechanical Engineering, 2010, 23, 733–741.
Zhou Q, Li X. Experimental investigation on climbing robot using rotation-flow adsorption unit. Robotics & Autonomous Systems, 2018, 105, 112–120.
Hillenbrand C, Schmidt D, Berns K. CROMSCI: Development of a climbing robot with negative pressure adhesion for inspections. Industrial Robot, 2008, 35, 228–237.
Zhao Y Z, Fu Z, Cao Q X, Wang Y. Development and applications of wall-climbing robots with a single suction cup. Robotica, 2004, 22, 643–648.
Illingworth L, Reinfeld D. Vortex Attractor for Planar and Non-planar Surfaces, US, US6619922, 2003.
Asbeck A T, Kim S, McClung A, Parness A, Cutcosky M R. Climbing walls with microspines. Proceeding of International Conference on Robotics and Automation, Orlando, USA, 2006, 4315–4317.
Kim S, Asbeck A T, Cutcosky M R, Provacher W R. Spinybot II: Climbing hard walls with compliant microspines. Proceeding of International Conference on Advanced Robotics, Seattle, USA, 2005, 601–606.
Autumn K, Buehler M, Cutkosky M, Fearing R, Full R J, Goldman D, Groff R, Provancher W, Rizzi A A, Saranli U, Saunders A, Koditscheck D E. Robotics in scansorial environments. Proceeding of Unmanned Ground Vehicle Technology VII. International Society for Optics and Photonics, Bellingham, USA, 2005, 291–302.
Haynes G C, Khripiny A, Lynch G, Amory J, Saunders A, Rizzi A A, Koditschek D E. Rapid pole climbing with a quadrupedal robot. Proceeding of International Conference on Robotics and Automation, Kobe, Japan, 2009, 2767–2772.
Bartsch S, Birnschein T, Römmermann M, Hilljegerdes J, Kühn D, Kirchner F. Development of the six-legged walking and climbing robot space-climber. Journal of Field Robotics, 2012, 29, 506–532.
Chen D L, Zhang Q, Liu S Z. Design and realization of a flexible claw of rough wall climbing robot. Advanced Materials Research, 2011, 328, 388–392.
Burgard W, Brock O, Stachniss C. Design of a bioinspired dynamical vertical climbing robot. In: Robotics: Science and Systems III, MIT Press, Massachusetts, USA, 2008, 9–16.
Parness A, McKenzie C. DROP: The durable reconnaissance and observation platform. Industrial Robot, 2013, 40, 218–223.
Tian Y, Tao D S, Pesika N, Wan J. Flexible control and coupling of adhesion and friction of gecko setal array during sliding. Tribology Online, 2015, 10, 106–114.
Yu Z W, Shi Y, Xie J X, Yang S X. Design and analysis of a bionic adhesive foot for gecko robot climbing the ceiling. International Journal of Robotics and Automation, 2018, 33, 445–454.
Unver O, Sitti M. Tankbot: A palm-size, tank-like climbing robot using soft elastomer adhesive treads. The International Journal of Robotics Research, 2010, 29, 1761–1777.
Seo T W, Sitti M. Tank-like module-based climbing robot using passive compliant joints. IEEE/ASME Transactions on Mechatronics, 2013, 18, 397–408.
Murphy M P, Kute C, Mengüç Y, Sitti M. Waalbot II: Adhesive recovery and improved performance of a climbing robot using fibrillar adhesives. The International Journal of Robotics Research, 2011, 30, 118–133.
Gorb S N. Uncovering insect stickiness: Structure and properties of hairy attachment devices. American Entomologist, 2005, 51, 31–35.
Ditsche P, Wainwright D K, Summers A P. Attachment to challenging substrates - Fouling, roughness and limits of adhesion in the northern clingfish (Gobiesox maeandricus). Journal of Experimental Biology, 2014, 217, 2548–2554.
Acknowledgment
This work was supported by grants from Science and Technology Major Project of Anhui Province (17030901034), and Jiangsu Key Research and Development Plan (BE2017067).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, J., Xu, L., Xu, J. et al. Design, Modeling and Experimentation of a Biomimetic Wall-climbing Robot for Multiple Surfaces. J Bionic Eng 17, 523–538 (2020). https://doi.org/10.1007/s42235-020-0042-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42235-020-0042-3