Abstract
A series of UV-curable fluorinated polyurethane-acrylate(PUA) has been developed by incorporating octafluoropentyl alcohol into the segment of UV-curable polyurethane-acrylate to improve the thermal property and surface property of the copolymer material. The structures of the synthesized polymers were characterized by Fourier transform infrared(FTIR) spectrometry. In order to find out the effect of incorporated fluorine on the UV-cured films, the properties of the UV-cured films were tested through contact angle, water absorption, and thermogravimetric analysis (TGA). The fractured-surface morphologies of the UV-cured coatings were investigated by scanning electron microscopy(SEM). With increasing the content of fluorine segments, the contact angle of the UV-cured films increased and the water absorption decreased, suggesting the fluorine segments migrated and formed a fluorine-covered surface to avoid water penetration. The observation of the fractured-surface morphology through SEM test showed that the fluorinated UV-cured films gained rough fractured-surface compared with the pure UV-cured polyacrylate film, demonstrating the migrating of the fluorine segments. The TGA curves show that the fluorinated UV-cured films gained higher thermal degradation temperature than the virgin UV-cured polyacrylate film. And as increasing the fluorine content, the thermal degradation temperature increased. These phenomena could be reasonably explained by the enrichment of fluorinecontained segment on the surface of the film and the high thermal property due to fluorine atom.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Poornima V. P., Jurgen P., Sabu T. J., Macromol. Sci. A, 2015, 52(5), 353
Koleske J. V., Radiation Curing of Coatings(No.45), West Conshohocken, ASTM International, PA, 2002
Knittel D., Schollmeyer E., Polym. Intern., 1998, 45, 110
Wang H. L., Liu W. Q., Yan Z. L., Tan J. Q., Xia-Hou G. L., RSC Adv., 2015, 5, 81838
Pappas S. P., Radiation Curing: Science and Technology, Plenum Press, NewYork, 1992
Lee J. H., Prud’Homme R. K., Aksay I. A., J. Mater. Res., 2001, 16(12), 3536
Erbay B. T., Serhatli I. E., Prog. Org. Coat., 2013, 76(1), 1
Cheng C. J., Zhang X., Huang Q. H., Dou X. Q., Li J., Cao X. X., Tu Y. M., J. Macromol. Sci. A, 2015, 52(6), 485
Arani Z. K., Ghaffarian S. R., Sadeghi G. M. M., J. Macromol. Sci. A, 2014, 51(2), 180
Sattar R., Kausar A., Siddiq M., Chin. J. Polym. Sci., 2015, 33(9), 1313
Xing Q., Li R. B., Dong X., Zhang X. Q., Zhang L. Y., Wang D. J., Chin. J. Polym. Sci., 2015, 33(9), 1294
Meng X. M., Yang X. H., Wang H. J., Jia R. K., Chem. Res. Chinese Universities, 2015, 31(4), 680
Xu H., Qiu F., Wang Y., Wu W., Yang D., Guo Q., Prog. Org. Coat., 2012, 73(1), 47
Li H., Zhang Z. B., Hu C. P., Wu S. S., Ying S. K., Eur. Polym. J., 2004, 40(9), 2195
Caillier L., de Givenchy E. T., Géribaldi S., Guittard F., J. Mater. Chem., 2008, 18, 760
Wang X. F., Ni H. G., Xue D. W., Wang X. P., Feng R. R., Wang H. F., J. Colloid Interface Sci., 2008, 321, 373
Kim Y. S., Lee J. S., Ji Q., McGrath J. E., Polymer, 2002, 43(25), 7161
Lin Y. H., Liao K. H., Huang C. K., Chou N. K., Wang S. S., Chu S. H., Polymer International, 2010, 59(9), 1205
Ni H., Gao J., Li X. H., Hu Y. Y., Yan D. H., Ye X. Y., Wang X. P., J. Colloid Interface Sci., 2012, 365(1), 260
Cui X., Zhong S., Wang H., Colloids Surf. A, 2007, 303(3), 173
Gao J., Wang X., Wei Y., Yang W., Gao J., Wei Y., J. Fluorine Chem., 2006, 127(2), 282
Wang W., Hua M. Q., Huang Y., Zhang Q., Zhang X. Y., Wu J. B., Chem. Res. Chinese Universities, 2015, 31(3), 362
Xiong P. T., Lu D. P., Chen P. Z., Huang H. Z., Guan R., European Polymer Journal, 2007, 43, 2117
Yang J. P., Yuan D. X., Zhou B., Gao J., Ni H. G., Zhang L., Wang X. P., J. Colloid Interface Sci.,2011, 359(1), 269
Tan H., Xie X. Y., Li J. H., Zhong Y. P., Fu Q., Polymer, 2004, 45(5), 1495
Honeychuck R. V., Ho T., Wynne K. J., Nissan R. A., Chem. Mater., 1993, 5, 1299
ASTM D2665-84, Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings, reapproved, ASTM International, West Conshohocken, 2009
ASTM D522/D522M-13, Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings, ASTM International, West Conshohocken, PA, 2013.
ASTM D5963-04(2010)e1, Standard Test Method for Rubber Property-Abrasion Resistance(Rotary Drum Abrader), ASTM International, West Conshohocken, 2010
Owens D. K., Wendt R. C., J. Appl. Polym. Sci., 1969, 13(8), 1741
Pinnau I., Freeman B. D., Formation and Modification of Polymeric Membranes: Overview, Acs Symposium, Washingtaon D. C., 2009
Çanak T. Ç., Serhatli I. E., Prog. Org. Coat., 2013, 76, 388
Carre A., Malchere A., J. Colloid Interface Sci., 1992, 149(2), 379
Girifalco L. A., Good R. J., J. Phys. Chem., 1957, 61(7), 904
Van Oss C. J., Good R. J., Chaudhury M. K., Langmuir, 1988, 4(4), 884
Wang Z. G., Appelhans D., Synytska A., Komber H., Simon F., Grundke K., Voit B., Macromolecules, 2008, 41, 8557
Author information
Authors and Affiliations
Corresponding author
Additional information
Supported by the the Science and Technology Program of Guangzhou City, China(No.2014J4100215), the Natural Science Foundation of Guangdong Province, China(No.S2013010012106) and the Project of the Key Laboratory of Cellulose and Lignocellulosics, Guangzhou Institute of Chemistry, Chinese Academy of Sciences.
Rights and permissions
About this article
Cite this article
Wang, H., Liu, W., Tan, J. et al. Synthesis and characterization of novel UV-curable fluorinated polyurethane-acrylate copolymer. Chem. Res. Chin. Univ. 32, 311–317 (2016). https://doi.org/10.1007/s40242-016-5272-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40242-016-5272-x