Abstract
Purpose
For the development of new intraocular pressure (IOP) measurement devices, as well as for comparison with existing devices it is important to consider the various biomechanical properties of the eye in test setups. Therefore, a controllable physical phantom with flexibility in the adjustment of biomechanical parameters and geometries is being proposed and analyzed.
Methods
Different configurations of a mechanical eye model are simulated together with the applanation process, based on the finite element method (FEM). Forming tools are designed to produce artificial corneas with variable thicknesses and stiffness’s using injection molding. An apparatus is assembled for controlling and evaluating the phantom eye in connection with a piezoelectric IOP test sensor. Measurements are also performed using the commercially available non-contact tonometer NCT-800.
Results
Simulation results for surface pressure and stress distribution at the cornea together with the pressure in the central part of the applanation body show that the pressure reaches a maximum when the local stress is centrally concentrated and decreases to a stable level afterwards. More rigid corneas result in higher maximum values for the pressure. The measurements with the piezoelectric IOP test sensor are in good agreement with the simulation results. The NCT-800 measurements show a significant influence of the biomechanical properties of the cornea on measured IOPs.
Conclusions
Our phantom is suitable for describing the effect of biomechanical characteristics of the human eye on tonometric measurements and will facilitate the evaluation of new tonometry systems.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Lamparter J, Hoffmann EM. Measuring intraocular pressure by different methods. Ophthalmologe. 2009; 106(8):676–82.
Kwon TH, Ghaboussi J, Pecknold DA, Hashash YMA. Effect of cornea material stiffness on measured intraocular pressure. J Biomech. 2008; 41(8):1707–13.
Harada Y, Hirose N, Kubota T, Tawara A. The influence of central corneal thickness and corneal curvature radius on the intraocular pressure as measured by different tonometers: noncontact and goldmann applanation tonometers. J Glaucoma. 2008; 17(8):619–25.
Hsu SY, Chang MS, Lee CJ. Intraocular pressure assessment in both eyes of the same patient after laser in situ keratomileusis. J Cataract Refract Surg. 2009; 35(1):76–82.
Kirwan C, O’Keefe M. Measurement of intraocular pressure in LASIK and LASEK patients using the Reichert Ocular Response Analyzer and Goldmann applanation tonometry. J Refract Surg. 2008; 24(4):366–70.
Qazi MA, Sanderson JP, Mahmoud AM, Yoon EY, Roberts CJ, Pepose JS. Postoperative changes in intraocular pressure and corneal biomechanical metrics Laser in situ keratomileusis versus laser-assisted subepithelial keratectomy. J Cataract Refract Surg. 2009; 35(10):1774–88.
Cabrera Fernández D, Niazy AM, Kurtz RM, Djotyan GP, Juhasz T. Finite element analysis applied to cornea reshaping. J Biomed Opt. 2005; doi: 10.1117/1.2136149.
Hien M, Yang THJ, Reuben RL, Else RW. Dynamic measurement of intraocular pressure using a mechanical model of the human eye. Stud Health Technol Inform. 2008; 133:112–22.
Roy AS, Dupps WJ. Patient-specific modeling of corneal refractive surgery outcomes and inverse estimation of elastic property changes. J Biomech Eng. 2011; doi: 10.1115/1.4002934.
Al-Sukhun J, Penttilä H, Ashammakhi N. Orbital Stress Analysis: Part II: Design and Fixation of Autogenous Bone Graft Used to Repair Orbital Blowout Fracture. J Craniofac Surg. 2011; 22(4):1294–8.
Bocskai Z, Bojtár I. Biomechanical modelling of the accommodation problem of human eye. Period Polytech Civ Eng. 2013; 57(1):3–9.
Crouch JR, Merriam JC, Crouch ER. Finite element model of cornea deformation. Conf Proc Med Image Comput Comput Assist Interv. 2005; 8(2):591–8.
Kling S, Marcos S. Finite-Element Modeling of Intrastromal Ring Segment Implantation into a Hyperelastic Cornea. Invest Ophthalmol Vis Sci. 2013; 54(1):881–9.
Nejad TM, Foster C, Gongal D. Finite element modelling of cornea mechanics: a review. Arq Bras Oftalmol. 2014; 77(1):60–5.
Power ED, Stitzel JD, West RL, Herring IP, Duma SM. A non linear finite elemente model of the human eye for large deformation loading. Conf Proc Biomech. 2001; 1:44–2.
Rossi T, Boccassini B, Esposito L, Clemente C, Iossa M, Placentino L, Bonora N. Primary Blast Injury to the Eye and Orbit: Finite Element Modeling. Invest Ophthalmol Vis Sci. 2012; 53(13):8057–66.
Sródka W. Evaluating the material parameters of the human cornea in a numerical model. Acta Bioeng Biomech. 2011; 13(3):77–85.
Studer H, Larrea X, Riedwyl H, Büechler P. Biomechanical model of human cornea based on stromal microstructure. J Biomech. 2010; 43(5):836–42.
Uchio E, Ohno S, Kudoh J, Aoki K, Kisielewicz LT. Simulation model of an eyeball based on finite element analysis on a supercomputer. Br J Ophthalmol. 1999; 83(10):1106–11.
Plagwitz KU. Studies on a new non-contact method of intraocular pressure measuring under considerations of the influence of the cornea thickness PhD thesis. Technische Universität Ilmenau; 20–5.
Remington LA. Clinical anatomy of the visual system. 2nd ed. Elsevier; 20–5.
Friberg TR, Lace JW. A comparison of the elastic properties of human choroid and sclera. Exp Eye Res. 1988; 47(3):429–36.
Bisplinghoff JA, McNally C, Manoogian SJ, Duma SM. Dynamic material properties of the human sclera. J Biomech. 2009; 42(10):1493–7.
Pollack IP, Viernstein LJ, Radius RL. An instrument for constant-pressure tomography. Exp Eye Res. 1979; 29(6):579–85.
Wangsupadilok B, Horatanaruang O. The impact of central corneal thickness on intraocular pressure measured by noncontact tonometry. J Med Assoc Thai. 2011; 94(5):574–8.
Weinreb RN, Brandt JD, Garway-Heath D, Medeiros F. Intraocular Pressure. 1st ed. Kugler Publications; 20–7.
Shaarawy T. Glaucoma: Medical diagnosis and therapy. 1st ed. Saunders/Elsevier; 20–9.
Boote C, Hayes S, Abahussin M, Meek KM. Mapping collagen organization in the human cornea: left and right eyes are structurally distinct. Invest Ophthalmol Vis Sci. 2006; 47(3): 901–8.
Elsheikh A. Finite element modeling of corneal biomechanical behavior. J Refract Surg. 2010; 26(4):289–300.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Saleh, K., Unger, V., Dietzel, A. et al. Mechanical eye model for evaluating intraocular pressure measurements. Biomed. Eng. Lett. 4, 396–402 (2014). https://doi.org/10.1007/s13534-014-0159-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13534-014-0159-6