Abstract
Water productivity (WP) is one of the most important critical indicators in the essential planning of water consumption in the agricultural sector. For this purpose, the WP and economic water productivity (WPe) were estimated using agronomic technologies. The impact of agronomic technologies on WP and WPe was carried out in two parts of field monitoring and modeling using novel intelligent approaches. Extreme learning machine (ELM), adaptive neuro-fuzzy inference system (ANFIS), and artificial neural network (ANN) methods were used to model WP and WPe. A dataset including 200 field data was collected from five treatment and control sections in the Malekan region, located in the southeast of Lake Urmia, Iran, for the crop year 2020–2021. Six different input combinations were introduced to estimate WP and WPe. The models used were evaluated using mean squared error (RMSE), relative mean squared error (RRMSE), and efficiency measures (NSE). Field monitoring results showed that in the treatment fields, with the application of agronomic technologies, the crop yield, WP, and WPe increased by 17.9%, 30.1%, and 19.9%, respectively. The results explained that irrigation water in farms W1, W2, W3, W4, and W5 decreased by 23.9%, 21.3%, 29.5%, 16.5%, and 2.7%, respectively. The modeling results indicated that the ANFIS model with values of RMSE = 0.016, RRMSE = 0.018, and NSE = 0.960 performed better in estimating WP and WPe than ANN and ELM models. The results confirmed that the crop variety, fertilizer, and irrigation plot dimensions are the most critical influencing parameters in improving WP and WPe.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Improving WP in the agricultural sector, as the primary sector that consumes water resources, requires special planning (Ahmadzade et al. 2015). Nowadays, a significant part of agricultural research is focused on strategies to optimize water consumption and increase productivity (Fatemi et al. 2014). Finding ways to increase WP through improving economic or crop yields in irrigated and rainfed agriculture is handled (Kassam et al. 2007). On the other hand, proper management of agricultural inputs, especially irrigation water, using modern technology is necessary to maximize production (Panda et al. 2003). Management factors increase WP by increasing crop yield (Tian et al. 2019, 2020, 2021; Momeni et al. 2011). All measures of actual saving and reduction of physical water loss in farm scales are considered ways to improve WP (Heidari 2012). Changing the cultivation pattern, improving irrigation management and crop varieties, and improving agricultural operations are among the most essential methods in improving WP (Neirizi and Helmi-fakhrdavoud 2004). The implementation of measures such as the use of zero tillage, deficit irrigation, modification of the cultivation pattern, and the use of improved cultivars have improved WP (Ogle et al. 2012; Yan et al. 2015; Humphreys et al. 2016). Various variables affect enhancing or increasing the WP and WPe. By examining the factors and determining the effect of each of them, solutions can be found to improve water use efficiency (WUE). The problem of feature selection is significant in many engineering problems, because many features are either useless or not very informative (Akay 2022). Population-based search approaches such as meta-heuristic algorithms are a suitable solution to reduce the number of factors (Zula et al. 2019). In recent years, the use of data mining and artificial intelligence models with the possibility of simultaneously investigating the effects of different variables on WP and crop yield has been considered (Najah et al. 2014; Palepu and Muley 2017; Ehteram et al. 2019; Khosravi et al. 2019; Dehghanisanij et al. 2021; Linaza et al. 2021; Holm et al. 2021; Saleem et al. 2021). These approaches are quantitative tools based on mathematical connections and can assess the effects of agricultural management factors on the growth and development of crops and water, soil, and climate variables (Hou et al. 2012; Zula et al. 2019). Table 1 shows some recent studies that used intelligent methods to estimate WP and crop yield parameters Artificial intelligence is vital in estimating crop yield and WP based on geography, weather, and season details. It helps grow the most suitable crop for the agricultural lands. Since the factors affecting WP differ significantly in different regions, determining the factors affecting WP will help optimize irrigation water- fertilizer consumption, additional inputs, and resources in farms. The present study was carried out to identify and determine the importance, and degree of influence, and investigate agricultural factors in improving WP and WPe.
This study was supposed out in two parts as follows:
(a) Investigating the impact of agronomic technologies on crop growth, irrigation water, and crop yield,
(b) Modeling and determination of agronomic parameters affecting WP and WPe using ANFIS, ELM, and ANN models.
The remaining sections are organized as follows: Sect. 2 introduces research areas and discusses experimental treatments and proposed methods. Section 3 presents results and a discussion on field measurements and modeling. Section 4 provides conclusions and suggestions for future improvements.
Methodology
Study area
To evaluate the application of agronomic techniques, five farms were selected in the Malekan region, located in the southeast of Lake Urmia, Iran. Malekan city is located at 37° 8'N and 46° 6'E of 1300 m above sea level. This region has a moderate climate.
The geographic site of the examination area is presented in Fig. 1.
Each farm was divided into two treatment and control sections. The experimental treatments were considered at three levels, including basin irrigation (BI), furrow irrigation (FI), and drip (tape) irrigation (DTI). The selected farms were part of a regional project conducted by the Agricultural Engineering Research Institute (AERI) during the 2020–2021 crop growing season in the Lake Urmia basin to encourage farmers to decrease applied water while the yield is constant or improved. In the AERI project, different technologies were transferred to the farmers and farmers' knowledge improved accordingly. The impact of transferred technology was studied using on-farm and weather data collections and evaluations. The factors of soil texture, meteorology, and irrigation methods were considered the same in treatment and control farms. Tables 2 and 3 show the general characteristics of farms, applied techniques, and used fertilizers.
Irrigation methods
Furrow irrigation
In the FI method, water reaches the seed area and the surface of the ridge through capillary tubes. In this method, the soil structure of the ridge surface is preserved, the ridge surface does not close, and its ventilation is desirable. The FI method is used in cases where the plant is sensitive to soil density, tuberculosis, and limited soil aeration (Sammis 1980; Dehghanisanij et al. 2022).
Drip (tape) irrigation
The DTI method is a thin-walled drip irrigation (DI) system that offers a cost-effective DI option for row crops. The DTI has drip tape sewn on the one side at a distance of 20 cm and has a discharge of 1.8 l/s. In the DTI, water is applied to the soil surface near the crop root zone to moisten a small area and depth from the soil surface (Patel and Rajput 2007).
Basin irrigation
BI is a method in which water penetrates the soil permanently or intermittently, and the soil is permanently submerged. In BI, water penetrates the crown area of the plant, and the problem of clogging heavy soils and reducing soil aeration occurs (Brouwer et al. 1988).
Irrigation scheduling
The FAO Penman–Monteith method was used to calculate potential evapotranspiration under standard conditions (ETo). Crop coefficients were determined using the four-step process of FAO (Allen et al. 1998). The amount of irrigation water required was calculated as follows (Brouwer 1986):
where IR means irrigation requirement (mm), Kc demonstrates crop coefficient, Pe denotes effective rainfall, and LR reveals leaching coefficient, which depends on soil structure, crop planting, type and amount of fertilizer consumption, and soil porosity.
The WSC flume (4/5/6–Washington State College Flumes) was used to measure water consumption in the farms (in farms W1, W2, and W4). The discharge was calculated as follows:
Q shows the discharge (l/s), and H denotes the water height (cm). At each irrigation, the discharge entering the farms was obtained using the above equations (Chamberlain 1952). The irrigation depth was calculated as follows:
where t indicates the duration of irrigation (sec), A shows the area (m2), and I shows the mean irrigation depth (mm).
The water discharge in BI and FI was measured by a WSC flume and that was a volumetric flow meter for DTI. The maximum irrigation interval in DI, BI, and FI treatment was 5 and 15 days, respectively.
Application efficiency (AE) indicates the losses of deep infiltration and runoff in the farm. AE is calculated in each irrigation interval from the following equation:
where AE is the application efficiency (%), Dz is the average depth of stored water in the root development zone (mm), and Dapp is the average depth of water penetrating the area under irrigation (mm).
Deep percolation loss (DP) (%) was calculated as follows:
WP and WPe are as follows (Howell 2001; Abbasi et al. 2017):
where Y shows the economic yield (kg ha−1) estimated based on the yielded product to the market, ET shows the evapotranspiration (mm), and NP represents the net profit ($) based on the difference between the costs incurred during the growing season and the revenue generated by the crop yield.
ET is calculated as follows:
where P indicates a wetted area (%), Roff shows the surface runoff (mm), and ΔS shows a change in soil moisture (mm).
Soil properties
A sampling of disturbed and undisturbed soil was accomplished to determine physical and chemical properties, soil texture, pH, saturated moisture, field capacity, and permanent wilting point at three depths of 0–30 cm, 30–60 cm, and 60–90 cm from the selected farms. The physical and chemical characteristics of soil and water are proposed in Table 4. The data in Table 5 were used to handle the irrigation schedule. The depth of root zone in farms W1, W2, W4, W5, and W3 was considered equal to 60 cm and 100 cm, respectively. Soil moisture was measured at depths of 0–30 and 30–60 cm by gravimetric method.
The permeability of the soil was measured for BI (W2), DTI (W3 and W5), and FI (W2 and W4) irrigation using the double ring and input–output flow methods, respectively. The mapping operation was carried out to determine the slope of the farms and to prepare a suitable seed bed. According to the mapping results and farm conditions, the leveling technique was performed on the farm.
To determine the grain yield, sampling was done randomly (1 m2) from three to six points. At each farm, 20 plants were assumed randomly assumed to determine the yield components.
Artificial neural network (ANN)
ANN is a computer model that mimics how neurons work in the human brain. ANNs use learning algorithms that can be turned on their own (Basheer and Hajmeer 2000). ANN is a multilayer, fully connected neural network. An ANN consists of an input layer, some hidden layers, and an output layer. All nodes in one layer are connected to all other nodes in the next layer. The design of ANN models follows several systematic steps. In general, there are five basic steps (Dongare et al. 2012):
-
Collect data,
-
Data preprocessing,
-
Building a network,
-
Training, and
-
Model test performance.
Collecting and preparing sample data is the first step in designing an ANN model. Figure 2 shows the scheme of the ANN model.
Adaptive neuro-fuzzy inference system (ANFIS)
ANFIS is an intelligent neuro-fuzzy technique used to model and control imprecise and uncertain systems (Walia et al. 2015). ANFIS is based on the input/output data pairs of the system under consideration. Figure 3 shows the schema of the ANFIS model. ANFIS combines the advantages of ANN and fuzzy logic (FL) into one framework. It provides accelerated learning and adaptive interpretation capabilities for complex modeling patterns and capturing nonlinear relationships. The ANFIS structure consists of five layers: fuzzy layer, product layer, normalization layer, de-fuzzy layer, and total output layer (Jang 1993).
Extreme learning machine (ELM)
ELM is a fast and robust machine learning algorithm. It is named after the single-layer feedforward neural network (SLFN) generalized in 2006–2008 (Huang et al. 2006). Fixed-weight SLFNs possess universal fitting properties, provided that the proper function is univariate.
SLFN is formulated as follows:
where Vj shows hidden layer neurons (j = 1,…., n), ai shows the weight of the connections between the input variable and the neuron in the hidden layer, wjo expresses the importance of the relationships between neurons in the hidden layer and output neurons, bi represents the bias of neurons in the hidden layer, b0 shows the tendency of the output neurons, fi and g show the activation function of neurons and output neurons, respectively, and si describes a binary variable.
ELM theory supports that randomness in determining input weights can be imparted to a learning model without adjusting the distribution. ELM is a particular machine learning setup that applies a single layer or multiple layers (Wang et al. 2014). An ELM contains hidden neurons with randomly assigned input weights. Figure 4 shows a schematic of the ELM model.
Data normalization
To avoid negative effect of different scales of variables on estimation models, it is necessary to correct the data through preprocessing (Fig 5). The data were normalized as follows (Larose 2005):
where xi is the observed value and x is the normal data corresponding to xi. Modeling data were randomly split into two parts: 80% for the training and 20% for the model test. Implementation and coding were performed using MATLAB R2013a software.
Performance Measures
To evaluate ANN, ANFIS, and ELM models root mean square error (RMSE), relative root mean square error (RRMSE), and efficiency measure (NSE) were used (Emami et al. 2021). The preferred criteria are provided by Eqs. 14–16.
where \(M_{i}\) and \(N_{i}\) indicate the observed and estimated values of WP and WPe, respectively. \(\overline{M}\) and \(\overline{N}\) are average observed and estimated values of WP and WPe, respectively.
Results and Discussion
Field measurements
Table 5 summarizes the results of irrigation water (I), average discharge (Q), irrigation interval, actual evapotranspiration (ETa), and AE in the first to third irrigations in fields W1, W2, W3, W4, and W5.
In all treatment farms, the amount of irrigation water was reduced compared to the control. The reduction of irrigation water for farms W1, W2, W3, W4, and W5 was equal to 23.9%, 21.3%, 29.5%, 16.5%, and 2.7%, respectively. The average AE in fields W1, W2, W3, W4, and W5 was calculated as 22.8%, 22.8%, 20.7%, 9.8%, and 8.7%, respectively. The application of agronomic techniques improved AE by 21.80% in the treatment fields compared to the control. Reducing the dimensions of the plots in W1 and W6 farms and using compost and leveling in W3, W4, and W5 farms played a significant role in reducing irrigation water and increasing AE. Land leveling allows for the large development of surface irrigation through high WUE, land, labor, fertilizers, and energy resources managed (Miao et al. 2021). Precision land leveling saved irrigation water in corn. Precision land leveling along with irrigation management has a direct effect on the WP and WPe of corn (Miao et al. 2021). Okasha et al. (2013) showed that the zero % slope method increased irrigation water.
The use of animal manure in W3 farms played a significant role in reducing water consumption and increasing AE. The monitoring of soil moisture samples showed that animal manure had a considerable effect on water retention compared to the control. The uniformity and AE increase by reducing the length of the furrow and field (Savva et al. 2002). Abd El-Mageed et al. (2018) concluded that organic compost and soil mulch significantly improved seed and fodder production under low irrigation conditions. Eid and Negm, (2018) listed farm leveling and DTI systems as factors for improving water use efficiency. El-Kader et al. (2010) observed that the okra crop yield with animal manure was higher than with plant residues. Ding et al. (2021) found compost rate to be effective on WP and wheat yield. Hati et al. (2006) reported that the use of 10 mg of animal manure increases WUE by 103%. The use of animal manure leads to a higher yield (Loss et al. 2019). Palangi et al., (2020) reported that the treatments with animal manure have a significant difference of 5% in terms of volumetric soil moisture compared to the control. Afshar et al. (2011) reported that the increase in animal manure led to an increase in tuber yield, tuber weight, and WUE in potatoes. Sadeghipour (2015) showed that the effect of animal manure on yield and WUE was statistically significant. Total tomato yield increased by 63% in animal manure treatment (Antonious 2018). Das et al. (2018) reported that the plots under permanent broad bed had 29% higher corn grain yield than conventional tillage. Ahmadabadi and Ghajarsepanlou, (2012), Wang and Yang, (2002), and Karlen and Camp, (1985) concluded that organic fertilizers increase soil moisture retention.
The amount of ETa improvement in the treatment farms W1, W2, W3, W4, and W5 was 1.4%, 0.6%, 15.9%, 7.3%, and 6.5%, respectively, compared to the control. Applied agronomic technologies such as modifying the dimensions of the plots and proper leveling were potentially effective in reducing ETa values in the treatment section compared to the control. In Table 6, the calculated ETa values are compared with those reported by researchers in other regions of Iran for the wheat crop. The difference between the results of this research and the results reported by other researchers is due to ETa being affected by climatic conditions (Allen et al. 1998).
In W1 and W2, grain yield increased in treatment farms compared to control. The yield increase in W1, W2, W3, W4, and W5 was 11.1%, 12.9%, 24.6%, 10%, and 30.9%, respectively, compared to the control. To measure WPe, the costs of different stages of planting and purchasing crops in the crop year 2020–2021 were calculated. In Table 7, the net profit of the examined crops (the difference between the gross income and the total costs of the crop area) is presented. In Table 8, the values of yield, WP, and WPe in the treatment and control sections are shown.
The results showed that modifying the fertilization schedule and changing the crop variety effectively increased yield. Tabatabaei et al. (2015) reported that the highest seed yield was obtained in the treatment of animal manure. The effect of the animal manure factor on relative yield, WUE, and fertilizer consumption was significant (Sadeghipour 2015). The results showed that with decreasing water consumption, WP increases, which is consistent with the results of research by Afshar et al. (2020) and Dehghanisanij et al. (2022). WP has a real relationship with yield and an inverse relationship with water consumption (Rockström and Barron 2007). Researchers have reported that agronomic management and fertilizer use play a significant role in increasing WP (Oweis 1999; Kumruzzaman and Sarker 2017; Noor et al. 2020; Munyasya et al. 2022). Researchers regarded that the optimal use of nitrogen fertilizer in citrus increased WP by 15% (Qin et al. 2016). Tillage affected increasing crop yield and WP. Researchers reported that intermittent tillage improves the physical and chemical characteristics of the soil, and increases the yield and WP (Hou et al. 2012).
Modeling results
Dataset
A dataset of five farms, including agronomic technologies such as changes in tillage methods (T), irrigation plot dimensions (D), crop varieties (V), and fertilizer (F) schedule. WP and WPe were used as the main outputs of the model. The agronomic technologies considered earlier are presented in Table 1 (https://zoom.earth/#view=37.7191,46.80333,9z/map=live). Table 9 shows four scenarios to determine the most suitable input variables for WP and WPe estimation. In selecting of variables, first, all the factors were considered as inputs to the models, then one of the input factors was removed, and ANN, ANFIS, and ELM models were re-implemented (Emami et al. 2021; Haghiabi et al. 2017).
The comparisons between the models show that the ANFIS and ELM models have a reasonable estimate of WP and WPe. In Table 10, ANFIS, ELM, and ANN models are compared in estimating WP and WPe. The analysis of the results showed that the ANFIS model with RMSE = 0.016 in scenario P5 has a higher efficiency in evaluating WP and WPe compared to the ELM and ANN models.
In Fig. 6a, b, the R2 and RMSE of ANFIS, ELM, and ANN models in estimating WP and WPe are compared. The results of the evaluation indices showed that the ANFIS is in a more appropriate and acceptable range compared to the ELM and ANN methods.
Different scenarios in WP and WPe estimation using the ANFIS model are evaluated in Table 11. Variable selection results show that the model P5 using the ANFIS method with values of RMSE = 0.016, RRMSE = 0.018, and NSE = 0.960 has a significant impact on WP and WPe estimation. Scenario P5 estimates WP and WPe values based on crop variety, fertilizer, and irrigation plot dimensions. Scenario P5 confirms that WP and WPe are positive with the moisture content at the field capacity (FC) and negative with the moisture content at the permanent wilting point (PWP). By increasing the moisture content at the FC point, the water maintaining capacity in the soil increases. Dehghanisanij et al. (2021) concluded that crop variety is the most critical factor in estimating WP in tomato crops. Taliei and Bahrami, (2002) showed that the soil moisture level at the time of planting is one of the determining factors in estimating the WP of dryland wheat. Scenario P1 (T, D, V, F) is in the second category, which shows that tillage methods have a more significant impact on WP. Keshvari (2018) reported that conservation tillage increases WP by 10.5% compared to conventional tillage. Khorramian and Ashraeizadeh (2020) concluded that using new crop varieties and tillage improves WP by 3% to 4%. Conservation tillage leads to a 16% reduction in water consumption (Keshvari 2018).
In Figs. 7 and 8, the estimated results (WP and WPe) are compared with the observed data, and R2 values are calculated.
The results showed that the ANFIS model is highly effective in estimating WP and WPe with R2 = 0.980 values. The scenario P5, with inputs of crop variety, irrigation plot dimensions, and fertilizer, has the most optimal values of statistical indicators. Richards et al. (2010) and Tatari et al. (2008) stated that WP is directly related to soil moisture content at FC pint. The results of the present study with the outcomes of the investigations of Sangtarashan et al. (2021), Hill and Cruse (1985), and Hu et al. (2018) are consistent.
Figure 9 shows the effectiveness of agronomic technologies in farms W1, W2, W3, W4, and W5 based on WP and WPe indicators.
The results showed that the agronomic techniques applied in the treatment fields W1, W2, W3, W4, and W5 led to an increase in WP and WPe indices by 40%, 20%, 35%, 13%, and 23%, respectively. Several types of research emphasize the increase of WP and WPe indices by applying agronomic techniques, and the results of this study are consistent (Hill et al. 1985; Hu et al. 2018). Sangtarashan et al. (2021) reported that the agronomic technologies led to an increase in WP, WUE, and WPe indices by 38%, 31%, and 56%, respectively.
Conclusion
In this paper, the physical and economic WP was estimated using ANFIS, ELM, and ANN models. The results showed that the use of agronomy techniques improved AE by 21.80% in treated farms compared to the control. Also, reducing plot dimensions and using animal manure in the basin and furrow irrigation methods played a significant role in reducing irrigation water consumption and increasing AE. The results showed that WP increases as water consumption decreases. Tillage methods affected the increase in yield and WP. The modeling results showed that the ANFIS model has good efficiency in estimating WP and WPe by considering the crop variety, fertilizer, and irrigation plot dimensions as model inputs. By regarding the parameters of crop variety, fertilizer, and irrigation plot dimensions, it is possible to achieve a more accurate estimation of WP and WPe. In the agricultural sector (for farmers), it is possible to find the best effective parameters in the estimation of WP, WPe, crop yield, and irrigation agronomic plans using intelligent methods. The results demonstrated that ANFIS could be used to predict other irrigation variables. Additionally, more advanced optimization algorithms can be used to speed up the convergence rate search for the best inner ANFIS variables and optimize the training process. In general, the results of this research may help farmers with limited resources in choosing a cost-effective crop management method to increase WP, WPe, crop yield, crop nutritional composition, etc.
References
Abbasi F, Abbasi N, Tavakoi A (2017) Water productivity in agriculture; challenges and prospects. J Water Sustain Dev 4(1):141–144
Abd El-Mageed TA, El-Samnoudi IM, Ibrahim AEAM, Abd El Tawwab AR (2018) Compost and mulching modulates morphological, physiological responses and watr use efficiency in sorghum (bicolor L. Moench) under low moisture regime. Agric Water Manag 208:431–439
Abrougui K, Gabsi K, Mercatoris B, Khemis C, Amami R, Chehaibi S (2019) Prediction of organic potato yield using tillage systems and soil properties by artificial neural network (ANN) and multiple linear regressions (MLR). Soil Tillage Res 190:202–208
Afshar A, Neshat A, Afsharmanesh G (2011) The effect of irrigation regime and manure on water use efficiency and yield of potato in Jiroft. J Water Soil Res Conserv 1(1):63–75
Afshar H, Sharifan H, Ghahraman B, Bannayan M (2020) Investigation of wheat water productivity in drip irrigation (tape) (Case study of Mashhad and Torbat Heydariyeh). Iran J Irrig Drain 14(1):39–48
Ahmadabadi Z, Ghajarsepanlou M (2012) Effect of organic matter application on some of the soil physical properties. J Water Soil Conserv 19(2):99–116
Ahmadzade H, Morid S, Delavar M (2015) Evaluation yield of sunflower (Farrokh cultivar) under effects of conventional deficit irrigation and partial root-zone drying. J Water Soil 25(5):876–889
Akay H (2022) Towards linking the sustainable development goals and a novel-proposed snow avalanche susceptibility mapping. Water Resour Manag 36(15):6205–6222. https://doi.org/10.1007/s11269-022-03350-7
Allen RG, Pereira LS, Raes D, Smith M (1998) FAO Irrigation and drainage paper No. 56. Rome: Food Agric Organ U n. 56(97):e156
Antonious GF (2018) Biochar and animal manure impact on soil, crop yield and quality. Agric Waste Residues 45–67
Basheer IA, Hajmeer M (2000) Artificial neural networks: fundamentals, computing, design, and application. J Microbiol Methods 43(1):3–31
Bazrafshan O, Ehteram M, Latif SD, Huang YF, Teo FY, Ahmed AN, El-Shafie A (2022) Predicting crop yields using a new robust Bayesian averaging model based on multiple hybrid ANFIS and MLP models. Ain Shams Eng J 13(5):101724
Belouz K, Nourani A, Zereg S, Bencheikh A (2022) Prediction of greenhouse tomato yield using artificial neural networks combined with sensitivity analysis. Sci Hortic 293:110666
Brouwer C, Prins K, Kay M, Heibloem M (1988) Irrigation water management: irrigation methods. Train Manual 9(5):5–7
Brouwer C, Heibloem M (1986) Irrigation water management: irrigation water needs. Training manual 3.
Chamberlain A (1952) Measuring water in small channels with WSC flume (Stations circular 200). State College of Washington
Das TK, Saharawat YS, Bhattacharyya R, Sudhishri S, Bandyopadhyay KK, Sharma AR, Jat ML (2018) Conservation agriculture effects on crop and water productivity, profitability and soil organic carbon accumulation under a maize-wheat cropping system in the North-western Indo-Gangetic Plains. Field Crop Res 215:222–231
Dehghanisanij H, Emami S, Achite M, Linh NTT, Pham QB (2021) Estimating yield and water productivity of tomato using a novel hybrid approach. Water 13(24):615
Dehghanisanij H, Emami H, Emami S, Rezaverdinejad V (2022) A hybrid machine learning approach for estimating the water-use efficiency and yield in agriculture. Sci Rep 12(1):1–16
Ding Z, Ali EF, Elmahdy AM, Ragab KE, Seleiman MF, Kheir AM (2021) Modeling the combined impacts of deficit irrigation, rising temperature and compost application on wheat yield and water productivity. Agric Water Manag 244:106626
Dongare AD, Kharde RR, Kachare AD (2012) Introduction to artificial neural network. Int J Eng Innov Technol (IJEIT) 2(1):189–194
Ehteram M, Afan HA, Dianatikhah M, Ahmed AN, Ming Fai C, Hossain MS, Elshafie A (2019) Assessing the predictability of an improved ANFIS model for monthly streamflow using lagged climate indices as predictors. Water 11(6):1130
Eid AR, Negm A (2018) Improving agricultural crop yield and water productivity via sustainable and engineering techniques. Conv Water Res Agric Egypt 561-591
El-Kader A, Shaaban SM, El-Fattah M (2010) Effect of irrigation levels and organic compost on okra plants (Abelmoschus esculentus L.) grown in sandy calcareous soil. Agric Biol JN Am 1(3):225–231
Emami S, Choopan Y (2019) Estimation of barley yield under irrigation with wastewater using RBF and GFF models of artificial neural network. J Appl Res Water Wastewate 6:73–79
Emami S, Parsa J, Emami H, Abbaspour A (2021) An ISaDE algorithm combined with support vector regression for estimating discharge coefficient of W-planform weirs. Water Supply 21(7):3459–3476
Esfandiarpour-Boroujeni I, Karimi E, Shirani H, Esmaeilizadeh M, Mosleh Z (2019) Yield prediction of apricot using a hybrid particle swarm optimization-imperialist competitive algorithm-support vector regression (PSO-ICA-SVR) method. Sci Hortic 257:108756
Esmaili M, Aliniaeifard S, Mashal M, Vakilian KA, Ghorbanzadeh P, Azadegan B, Didaran F (2021) Assessment of adaptive neuro-fuzzy inference system (ANFIS) to predict production and water productivity of lettuce in response to different light intensities and CO2 concentrations. Agric Water Manag 258:107201
Fatemi Z, Paknejad F, Amiri E, Eilkaee MN (2014) Capability of the ceres-barley model for predicting barley varieties growth under deficit irrigation. Biology 2(1):1–7
Haghiabi AH, Azamathulla HM, Parsaie A (2017) Prediction of head loss on cascade weir using ANN and SVM. ISH J Hydraul Eng 23(1):102–110
Hati KM, Mandal KG, Misra AK, Ghosh PK, Bandyopadhyay KK (2006) Effect of inorganic fertilizer and farmyard manure on soil physical properties, root distribution, and water-use efficiency of soybean in Vertisols of central India. Bioresource Technol 97(16):2182–2188
Heidari N (2012) Determining and evaluating of water use efficiency of some major crops under farmer’s management in Iran. Water Irrig Manag 1(2):43–57
Hill RL, Cruse RM (1985) Tillage Effects on Bulk Density and Soil Strength of Two Mollisols 1. Soil Sci Soc Am J 49(5):1270–1273
Holm JA, Keenan T, Ricciuto D, Emanuele V (2021) Deep learning techniques to disentangle water use efficiency, climate change, and carbon sequestration across ecosystem scales (No. AI4ESP-1061). Artificial Intelligence for Earth System Predictability (AI4ESP) Collaboration (United States).
Hou X, Li R, Jia Z, Han Q, Wang W, Yang B (2012) Effects of rotational tillage practices on soil properties, winter wheat yields and water-use efficiency in semi-arid areas of north-west China. Field Crop Res 129(2):7–13
Howell TA (2001) Enhancing water use efficiency in irrigated agriculture. Agron J 93:281–289
Hu W, Tabley F, Beare M, Tregurtha C, Gillespie R, Qiu W, Gosden P (2018) Short-term dynamics of soil physical properties as affected by compaction and tillage in a silt loam soil. Vadose Zone Journal 17 (1).
Huang GB, Zhu QY, Siew CK (2006) Extreme learning machine: theory and applications. Neuro-Computing 70(1–3):489–501
Humphreys E, Gaydon DS, Eberbach PL (2016) Evaluation of the effects of mulch on optimum sowing date and irrigation management of zero till wheat in central Punjab, India using APSIM. Field Crop Res 197:83–96
Jang JSR (1993) ANFIS: adaptive-network-based fuzzy inference system. IEEE Trans Syst Man Cybern 23(3):665–685
Karlen DL, Camp CR (1985) Row spacing, plant population, and water management effects on corn in the Atlantic Coastal Plain. Agronomy 77(3):393–398
Kassam AH, Molden D, Fereres E, Doorenbos J (2007) Water productivity: science and practice—introduction. Irrig Sci 25(3):185–188
Keshvari, A. Investigating the effect of tillage systems on water productivity and wheat yield. 15th International conference on new ideas in agriculture, environment and tourism. Tehran, Iran, 2018.
Khorramian M, Ashraeizadeh SR (2020) Effect of tillage methods on soil physical properties and water productivity of wheat cultivars in wheat-corn rotation. Iran J Soil Water Res 50(9):2193–2200
Khosravi K, Daggupati P, Alami MT, Awadh SM, Ghareb MI, Panahi M, Yaseen ZM (2019) Meteorological data mining and hybrid data-intelligence models for reference evaporation simulation: A case study in Iraq. Comput Electron Agric 167:105041
Kumruzzaman Md, Sarker A (2017) Water requirements for various crops and impact of irrigation in barind area. Malays J Sustain Agric 1(1): 04–07
Larose DT (2005) An introduction to data mining. Traduction et adaptation de Thierry Vallaud.
Linaza MT, Posada J, Bund J, Eisert P, Quartulli M, Döllner J, Lucat L (2021) Data-driven artificial intelligence applications for sustainable precision agriculture. Agronomic 11(6):1227
Liu D, Li M, Wang K, Fu Q, Zhang L, Li M, Cui S (2022) Evaluation and analysis of irrigation water use efficiency based on an extreme learning machine model optimized by the spider monkey optimization algorithm. J Clean Prod 330:129935
Loss A, Couto RDR, Brunetto G, Veiga MD, Toselli M, Baldi E (2019) Animal manure as fertilizer: changes in soil attributes, productivity and food composition. Int J Res Granthaalayah 7(9):307
Miao Q, Gonçalves JM, Li R, Gonçalves D, Levita T, Shi H (2021) Assessment of Precise Land Levelling on Surface Irrigation Development. Impacts on Maize Water Productivity and Economics. Sustainability 13(3):1191
Momeni R, Behbahani MR, Nazari Far MH, Azadegan B (2011) Evaluation of increasing water productivity scenarios for rain-fed wheat by management analysis of CropSyst crop model in Karkheh basin. Water Irrig Manag 1(1):29–40
Munyasya AN, Koskei K, Zhou R, Liu S, Indoshi SN, Wang W et al (2022) Integrated on-site & off-site rainwater-harvesting system boosts rainfed maize production for better adaptation to climate change. Agric Water Manag 269:107672
Najah A, El-Shafie A, Karim OA, El-Shafie AH (2014) Performance of ANFIS versus MLP-NN dissolved oxygen prediction models in water quality monitoring. Environ Sci Pollut Res 21(3):1658–1670
Neirizi S, Helmi-fakhrdavoud R (2004) Comparison of water-use efficiency in several places of Khorasan. Proceedings of the 11th Conference of Iran's National Irrigation and Drainage Committee, Tehran. Iran
Noor RS, Hussain F, Saad A, Umair M (2020) Maize (Zea Mays) production under different irrigation treatments: investigating the germination and early growth. Sci Heritage J 4(1):43–45
Ogle SM, Swan A, Paustian K (2012) No-till management impacts on crop productivity, carbon input and soil carbon sequestration. Agr Ecosyst Environ 149:37–49
Okasha EM, Abdelraouf RE, Abdou MAA (2013) Effect of land leveling and water applied methods on yield and irrigation water use efficiency of maize (Zea mays L.) grown under clay soil conditions. World Appl Sci J 27(2):183–190
Oweis T (1999) Water harvesting and supplemental irrigation for improved water use efficiency in dry areas 7.
Palangi S, Bahmani O, Atlasi-pak V (2020) Comparison of different biochar and fertilizer levels on yield and yield components of wheat and water use efficiency. Appl Soil Res 8(3):160–171
Palepu RB, Muley RR (2017) An analysis of agricultural soils by using data mining techniques. Int J Eng Sci Comput 7 (10)
Panda RK, Behera SK, Kashia PS (2003) Effective management of irrigation water for wheat under stressed conditions. Agric Water Manag 63(1):37–56
Patel N, Rajput TBS (2007) Effect of drip tape placement depth and irrigation level on yield of potato. Agric Water Manag 88(1–3):209–223
Qin W, Assinck FB, Heinen M, Oenema O (2016) Water and nitrogen use efficiencies in citrus production: a meta-analysis. Agric Ecosyst Environ 222:103–111
Rashid M, Bari BS, Yusup Y, Kamaruddin MA, Khan N (2021) A comprehensive review of crop yield prediction using machine learning approaches with special emphasis on palm oil yield prediction. IEEE Access 9:63406–63439
Rockström J, Barron J (2007) Water productivity in rainfed systems: overview of challenges and analysis of opportunities in water scarcity prone savannahs. Irrig Sci 25(3):299–311
Richards RA, Rebetzke GJ, Watt M, Condon AT, Spielmeyer W, Dolferus R (2010) Breeding for improved water productivity in temperate cereals: phenotyping, quantitative trait loci, markers and the selection environment. Funct Plant Biol 37(2):85–97
Sadeghipour M (2015) The effects of cattle manure and nitrogen fertilizer application on some characteristics of Spinach (Spinacea Oleracea). Appl Field Crops Res 28(3):53–64
Saleem MH, Potgieter J, Arif KM (2021) Automation in agriculture by machine and deep learning techniques: a review of recent developments. Precision Agric 22(6):2053–2091
Sammis TW (1980) Comparison of Sprinkler, Trickle, Subsurface, and Furrow Irrigation Methods for Row Crops 1. Agron J 72(5):701–704
Sangtarashan A, Mirlatifi M, Dehghanisanij H (2021) Effects of improved agricultural field practices on water productivity and water-use efficiency indices in the eastern basin of Lake Urmia. J Water Res Agric 35(1):35–46
Savva AP, Frenken K (2002) Irrigation manual. Planning, development monitoring and evaluation of irrigated agriculture with farmer participation. FAO.
Tabatabaei S, Shakeri E, Nasiri H (2015) Effect of different method irrigation and manure on reduce water use in the planting grain maize cv. Ksc704 Iran J Field Crops Res 12(4):766–775
Taliei A, Bahrami N (2002) The effect of rainfall and temperature on dryland wheat yield in Kermanshah province. Soil Water Sci 1:106–111
Tatari M, Koocheki A, Mahallati MN, Alikamar RA (2008) Dryland wheat yield prediction by precipitation and edaphic data: Regression and artificial neural network models. In Sustain Dev Drylands Meet Chall Glob Clim Change 7:400
Tian H, Huang N, Niu Z, Qin Y, Pei J et al (2019) Mapping winter crops in China with multi-source satellite imagery and phenology-based algorithm. Remote sensing (Basel, Switzerland)
Tian H, Pei J, Huang J, Li X, Wang J, Zhou B et al (2020) Garlic and winter wheat identification based on active and passive satellite imagery and the google earth engine in Northern China. Remote sensing (Basel, Switzerland)
Tian H, Qin Y, Niu Z, Wang L, Ge S (2021) Summer maize mapping by compositing time series sentinel-1a imagery based on crop growth cycles. J Ind Soc Remote Sens 49(11)
Upadhya SM, Mathew S (2020) Implementation of fuzzy logic in estimating yield of a vegetable crop. In Journal of Physics: Conference Series 1. IOP Publishing.
Walia N Singh H, Sharma A (2015) ANFIS: Adaptive neuro-fuzzy inference system-a survey. Int J Comput Appl 123 (13)
Wang N, Er MJ, Han M (2014) Generalized single-hidden layer feedforward networks for regression problems. IEEE Trans Neural Netw Learn Syst 26(6):1161–1176
Wang MC, Yang CH (2002) Effect of paddy-upland crop rotation with various fertilizations on soil physical and chemical properties. In 17. World congress of soil science, Bangkok. Thailand.
Yan N, Wu B, Perry C, Zeng H (2015) Assessing potential water savings in agriculture on the Hai Basin plain, China. Agric Water Manag 154:11–19
Zula NS, Sibanda M, Tlali BS (2019) Factors affecting sugarcane production by small-scale growers in Ndwedwe Local Unicipality. South Afr Agric 9(8):1–14
Acknowledgements
We would like to thank the Agricultural Engineering Research Institute, Agricultural Research, Education and Extension Organization (AREEO), Karaj, Alborz, Iran, for assisting to conduct this study. This research was carried out with the support of the Conservation of Iranian wetlands project (CIWP) and in the framework of "Modeling local community participation in Lake Urmia restoration via the establishment of sustainable agriculture."
Funding
This research received no external funding.
Author information
Authors and Affiliations
Contributions
HD and MA conceived the study; HD was responsible for methodology, project administration, and funding acquisition; SE was involved in software, formal analysis, investigation, resources, data curation, and visualization; MA, NT TL, and SE contributed to validation; HD, SE, and MA wrote the original draft; HD, SE, MA, and NT TL took part in writing—reviewing and editing; and HD and NAl-A participated in supervision. All authors have read and agreed to the published version of the manuscript.
Corresponding author
Ethics declarations
Conflicts of interest
The authors declare no conflict of interest.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Emami, S., Dehghanisanij, H., Achite, M. et al. Application of ANFIS, ELM, and ANN models to assess water productivity indicators based on agronomic techniques in the Lake Urmia Basin. Appl Water Sci 13, 55 (2023). https://doi.org/10.1007/s13201-022-01851-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s13201-022-01851-9