Abstract
Proton exchange membrane fuel cells (PEMFCs) not only provide rapid dynamic response but also operate at low temperatures, which are desirable characteristics for transportation applications. However, metal bipolar plates in PEMFCs often deform under excessive clamping pressure, resulting in uneven pressure distribution. Rib-stiffened channels have been proposed to increase the structural stiffness of the bipolar plates, promoting durability. Parametric studies reveal that the supporting walls formed by the rib structure and a reduced top surface area contribute to better resistance against clamping force. Structural analysis and experimental assessments have confirmed the effectiveness of rib-stiffened channels in mitigating deformation. To ensure uniform compression of the gas diffusion layer during bolt assembly, a combined straight and rib-stiffened flow field has been designed and validated through structural simulations. Rib structures do not compromise fuel cell performance, as proved by computational fluid dynamics simulation with electrochemical reaction.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
UNFCCC, The Paris Agreement. What is the Paris Agreement?, UNFCCC (2015) https://unfccc.int/process-and-meetings/the-paris-agreement, Accessed on August 7, 2023.
G. J. Offer et al., Comparative analysis of battery electric, hydrogen fuel cell and hybrid vehicles in a future sustainable road transport system, Energy Policy, 38 (1) (2010) 24–29.
B. Cárdenas et al., Short-, medium-, and long-duration energy storage in a 100% renewable electricity grid: a UK case study, Energies, 14 (24) (2021) 8524.
B. Wu, M. Matian and G. J. Offer, Hydrogen PEMFC system for automotive applications, International J. of Low-Carbon Technologies, 7 (1) (2012) 28–37.
A. Tang et al., An overview of bipolar plates in proton exchange membrane fuel cells, J. of Renewable and Sustainable Energy, 13 (2) (2021) 022701.
J. Hamelin et al., Dynamic behavior of a PEM fuel cell stack for stationary applications, International J. of Hydrogen Energy, 26 (6) (2001) 625–629.
H. C. Kuan et al., Preparation, electrical, mechanical and thermal properties of composite bipolar plate for a fuel cell, J. of Power Sources, 134 (1) (2004) 7–17.
S. Karimi et al., A review of metallic bipolar plates for proton exchange membrane fuel cells materials and fabrication methods, Advances in Materials Science and Engineering, 2012 (2012).
A. M. Dafalla and F. Jiang, Stresses and their impacts on proton exchange membrane fuel cells a review, International J. of Hydrogen Energy, 43 (4) (2018) 2327–2348.
H. N. Yu, S. S. Kim and J. Do Suh, Composite endplates with pre-curvature for PEMFC (polymer electrolyte membrane fuel cell), Composite Structures, 92 (6) (2010) 1498–1503.
P. Lin, P. Zhou and C. W. Wu, Multi-objective topology optimization of end plates of proton exchange membrane fuel cell stacks, J. of Power Sources, 196 (3) (2011) 1222–1228.
C. K. Jin, M. G. Jung and C. G. Kang, Fabrication of aluminum bipolar plates by semi - solid forging process and performance test of TiN coated aluminum bipolar plates, Fuel Cells, 14 (4) (2014) 551–560.
R. N. Lakshmi, Forming of ferritic stainless steel bipolar plates, Ph.D. Thesis, University of Windsor, Canada (2012).
B. Jang, J. Lee and S. Kwon, Design and fabrication of fully enclosed micro PEM fuel cell using novel glass bipolar plates, POWERMEMS 2010, The 10th international workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, Leuven, Belgium (2010).
D. Moreno et al., ESR dating of Middle Pleistocene archaeopaleontological sites from the Manzanares and Jarama river valleys (Madrid basin, Spain), Quaternary International, 520 (2019) 23–38.
Z. Wu et al., An inner-field uniform pressure actuator with high performance and its application to titanium bipolar plate forming, International J. of Machine Tools and Manufacture, 155 (2020) 103570.
H. Zhu et al., Evolution of Ti2Ni precipitations during annealing and their effects on properties of Ti–Nb–Ni foil as PEMFC bipolar plates substrate, International J. of Hydrogen Energy, 48 (39) (2023) 14822–14836.
D. Qiu et al., Study on shape error effect of metallic bipolar plate on the GDL contact pressure distribution in proton exchange membrane fuel cell, International J. of Hydrogen Energy, 38 (16) (2013) 6762–6772.
D. Qiu et al., A micro contact model for electrical contact resistance prediction between roughness surface and carbon fiber paper, International J. of Mechanical Sciences, 124 (2017) 37–47.
P. Yi et al., Performance of a proton exchange membrane fuel cell stack using conductive amorphous carbon-coated 304 stainless steel bipolar plates, J. of Power Sources, 195 (20) (2010) 7061–7066.
ANSYS, Inc., Ansys® Mechanical, Release 2020R1, Engineering Data, ANSYS, Inc. (2020).
Z. Jie and Y. Hu, Sealing performance and mechanical behavior of PEMFCs sealing system based on thermodynamic coupling, International J. of Hydrogen Energy, 45 (43) (2020) 23480–23489.
SGL Group, GDL 24 & 25 Series Gas Diffusion Layer, SGL Group, Germany (2007).
ANSYS, Inc., Ansys® Fluent, Release 2020R1, Help System, Modeling Fuel Cells, ANSYS, Inc (2020).
Y. Al-Okbi et al., Influence of design anode and cathode channel on (PEMFC) fuel cell performance, Materials Today: Proceedings, 42 (2021) 2177–2184.
Acknowledgments
This work was supported by Korea Evaluation Institute of Industrial Technology (20009835 and RS-2022-00156525) and Korea Institute of Energy Technology Evaluation and Planning (20203010030010).
Author information
Authors and Affiliations
Corresponding author
Additional information
Choeun Kim is a research fellow at the Institute of Engineering at the University of Seoul, Korea. She received her Master’s in Mechanical and Information Engineering from the University of Seoul. Her research interests include the analysis of electrochemical devices, such as fuel cells and electrolysis, using computational fluid dynamics, finite element analysis, and electrochemical experiments.
Seoungsu Im is a research fellow at the Institute of Engineering at the University of Seoul, Korea. He received his Master’s in Mechanical and Information Engineering from the University of Seoul. His research interests include the analysis of electrochemical devices, such as fuel cells and electrolysis, using computational fluid dynamics.
Youngseung Na is an Associate Professor of Mechanical and Information Engineering at the University of Seoul, Korea. He received his Dr.-Ing. degree in Mechanical Engineering from TU Braunschweig and International Max Planck Research School, Germany. His research interests include electrochemical systems such as fuel cells, electrolyzers, and electrochemical hydrogen compressors.
Rights and permissions
About this article
Cite this article
Kim, C., Im, S. & Na, Y. Robust channel structures of proton exchange membrane fuel cells for uniform clamping pressure to gas diffusion layers. J Mech Sci Technol 38, 3817–3827 (2024). https://doi.org/10.1007/s12206-024-0650-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-024-0650-7