Abstract
The cyclic wetting-drying phenomenon is a complicated physical and chemical process. This kind of process will weaken the properties of rock to some extent. Some fundamental physical parameters of sandstone were first tested to study the weakening influence of wetting-drying cycles on the physical characteristics. Then, the water weakening effect on the mechanical and acoustic emission (AE) characteristics of rock on account of wetting-drying cycles was experimentally studied. Laboratory test results showed that when the number of cycles increased from 0 to 25, the density, P-wave velocity, uniaxial compressive strength (UCS), (elastic modulus (E)) and total AE counts of the rock specimens continuously decreased. However, the water absorption would increase as the number of cycles increased. The functional relationships between the total AE counts and the mechanical parameters (UCS and E) of sandstone after each cyclic number were established based on the test results. In addition, the chemical components and microstructure variations of rock undergoing wetting-drying cycles were examined. From the results, it can be concluded that microcrack growth and expansion inside the rocks undergoing wetting-drying cycles are the main reasons for the attenuation of the rock properties. Moreover, with increasing loading rate, the UCS, E and total AE counts of sandstone after each cyclic number would increase.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Azimian A, Ajalloeian R (2015) Empirical correlation of physical and mechanical properties of marly rocks with P wave velocity. Arabian Journal of Geosciences 8:1–11, DOI: https://doi.org/10.1007/s12517-013-1235-4
Backers T, Stanchits S, Dresen G (2005) Tensile fracture propagation and acoustic emission activity in sandstone: The effect of loading rate. International Journal of Rock Mechanics and Mining Sciences 42:1094–1101, DOI: https://doi.org/10.1016/j.ijrmms.2005.05.011
Cai X, Zhou ZL, Liu KW, Du XM, Zang HZ (2019) Water-weakening effects on the mechanical behavior of different rock types: Phenomena and mechanisms. Applied Sciences-Basel 9:1–18, DOI: https://doi.org/10.3390/app9204450
Deng HF, Li JL, Zhu M, Wang KW, Wang LH, Deng CJ (2012) Experimental research on strength deterioration rules of sandstone under “saturation-air dry” circulation function. Rock and Soil Mechanics 33(11):3306–3312, DOI: https://doi.org/10.16285/j.rsm.2012.11.015 (in Chinese)
Gong FQ, Yan JY, Luo S, Li XB (2019) Investigation on the linear energy storage and dissipation laws of rock materials under uniaxial compression. Rock Mechanics and Rock Engineering 54:4237–4255, DOI: https://doi.org/10.1007/s00603-019-01842-4
Hua W, Dong SM, Li YF, Wang QY (2016) Effect of cyclic wetting and drying on the pure mode II fracture toughness of sandstone. Engineering Fracture Mechanics 153:143–150, DOI: https://doi.org/10.1016/j.engfacmech.2015.11.020
Hua W, Dong SM, Li YF, Xu JG, Wang QY (2015) The influence of cyclic wetting and drying on the fracture toughness of sandstone. International Journal of Rock Mechanics & Mining Sciences 78:331–335, DOI: https://doi.org/10.1016/j.ijrmms.2015.06.010
Kassab MA, Weller A (2015) Study on P-wave and S-wave velocity in dry and wet sandstones of Tushka region. Egyptian Journal of Petroleum 28(1):1–11, DOI: https://doi.org/10.1016/j.ejpe.2015.02.001
Khanlari G, Abdilor Y (2015) Influence of wet-dry, freeze-thaw, and heat-cool cycles on the physical and mechanical properties of upper red sandstones in central Iran. Bulletin of Engineering Geology and the Environment 74:1287–1300, DOI: https://doi.org/10.1007/s10064-014-0691-8
Kim JS, Lee KS, Cho WJ, Choi HJ, Cho GC (2015) A comparative evaluation of stress-strain and acoustic emission methods for quantitative damage assessments of brittle rock. Rock Mechanics and Rock Engineering 48:495–508, DOI: https://doi.org/10.1007/s00603-014-0590-0
Lei RD, Wang Y, Zhang L, Liu BL, Long K, Luo P, Wang YK (2019) The evolution of sandstone microstructure and mechanical properties with thermal damage. Energy Science & Engineering 7(6):3058–3075, DOI: https://doi.org/10.1002/ese3.480
Liu XR, Jin MH, Li DL, Zhang L (2018) Strength deterioration of a Shaly sandstone under dry-wet cycles: A case study from the Three Gorges Reservoir in China. Bulletin of Engineering Geology and the Environment 77:1607–1621, DOI: https://doi.org/10.1007/s10064-017-1107-3
Liu PF, Liu XF, Tian GD, Gan F, Bi J (2020) Effect of thermal cycling and hydro-thermal cycling on physical and mechanical properties of sandstone. Energy Science & Engineering 8:718–730, DOI: https://doi.org/10.1002/ese3.544
Liu XR, Wang ZJ, Fu Y, Yuan W, Miao LL (2016) Macro/micro testing and damage and degradation of sandstones under dry-wet cycles. Advances in Materials Science and Engineering 2016:1–16, DOI: https://doi.org/10.1155/2016/7013032
Özbek A (2014) Investigation of the effects of wetting-drying and freezing-thawing cycles on some physical and mechanical properties of selected ignimbrites. Bulletin of Engineering Geology and the Environment 73:595–609, DOI: https://doi.org/10.1007/s10064-013-0519-y
Qin Z, Chen XX, Fu HL (2018) Damage features of altered rock subjected to drying-wetting cycles. Advances in Civil Engineering 2018:1–10, DOI: https://doi.org/10.1155/2018/5170832
Samaniego E, Anitescu C, Goswami S, Nguyen-Thanh VM, Guo H, Hamdia K, Zhuang X, Rabczuk T (2020) An energy approach to the solution of partial differential equations in computational mechanics via machine learning: Concepts, implementation and applications. Computer Methods in Applied Mechanics and Engineering 362(s1):1–29, DOI: https://doi.org/10.1016/j.cma.2019.112790
Sun Q, Zhang YL (2019) Combined effects of salt, cyclic wetting and drying cycles on the physical and mechanical properties of sandstone. Engineering Geology 248:70–79, DOI: https://doi.org/10.1016/j.enggeo.2018.11.009
Vu-Bac N, Lahmer T, Zhuang X, Nguyen-Thoi T, Rabczuk T (2016) A software framework for probabilistic sensitivity analysis for computationally expensive models. Advances in Engineering Software 100:19–31, DOI: https://doi.org/10.1016/j.advengsoft.2016.06.005
Wang JJ, Zhou YF, Wu X, Zhang HP (2019) Effects of soaking and cyclic wet-dry actions on shear strength of an artificially mixed sand. KSCE Journal of Civil Engineering 23(4):1617–1625, DOI: https://doi.org/10.1007/s12205-019-0896-2
Zhang ZH, Jiang QH, Zhou CB, Liu XT (2014) Strength and failure characteristics of Jurassic Red-Bed sandstone under cyclic wetting-drying conditions. Geophysical Journal International 198:1034–1044, DOI: https://doi.org/10.1093/gji/ggu181
Zhang BY, Zhang JH, Sun GL (2015) Deformation and shear strength of rockfill materials composed of soft siltstones subjected to stress, cyclical drying/wetting and temperature variations. Engineering Geology 190:87–97, DOI: https://doi.org/10.1016/j.enggeo.2015.03.006
Zhang XP, Zhang Q, Wu SC (2017) Acoustic emission characteristics of the rock-like material containing a single flaw under different compressive loading rates. Computers and Geotechnics 83:83–97, DOI: https://doi.org/10.1016/j.compgeo.2016.11.003
Zhao YF, Ren S, Jiang DY, Liu R, Wu JX, Jiang X (2018) Influence of wetting-drying cycles on the pore structure and mechanical properties of mudstone from Simian Mountain. Construction and Building Materials 191:923–931, DOI: https://doi.org/10.1016/j.conbuildmat.2018.10.069
Zhao ZH, Yang J, Zhang DF, Peng H (2017) Effects of wetting and cyclic wetting-drying on tensile strength of sandstone with a low clay mineral content. Bulletin of Engineering Geology and the Environment 50:485–491, DOI: https://doi.org/10.1007/s00603-016-1087-9
Zhou ZL, Cai X, Chen L, Cao WB, Zhao Y, Cheng X (2017) Influence of cyclic wetting and drying on physical and dynamic compressive properties of sandstone. Engineering Geology 220:1–12, DOI: https://doi.org/10.1016/j.enggeo.2017.01.017
Zhou ZL, Cai X, Ma D, Chen L, Wang SF, Tan LH (2018a) Dynamic tensile properties of sandstone subjected to wetting and drying cycles. Construction and Building Materials 182:215–232, DOI: https://doi.org/10.1016/j.conbuildmat.2018.06.056
Zhou SW, Zhuang XY (2020) Phase field modeling of hydraulic fracture propagation in transversely isotropic poroelastic media. Acta Geotechnica 15:2599–2618, DOI: https://doi.org/10.1007/s11440-020-00913-z
Zhou SW, Zhuang XY, Rabczuk T (2018b) A phase-field modeling approach of fracture propagation in poroelastic media. Engineering Geology 240:189–203, DOI: https://doi.org/10.1016/j.enggeo.2018.04.008
Zhou SW, Zhuang XY, Rabczuk T (2019) Phase-field modeling of fluid-driven dynamic cracking in porous media. Computer Methods in Applied Mechanics and Engineering 350:169–198, DOI: https://doi.org/10.1016/j.cma.2019.03.001
Zhou SW, Zhuang XY, Rabczuk T (2020) Phase field method for quasi-static hydro-fracture in porous media under stress boundary condition considering the effect of initial stress field. Theoretical and Applied Fracture Mechanics 107:1–15, DOI: https://doi.org/10.1016/j.tafmec.2020.102523
Zhuang XY, Zhou SW, Sheng M, Li GS (2020) On the hydraulic fracturing in naturally-layered porous media using the phase field method. Engineering Geology 266:1–16, DOI: https://doi.org/10.1016/j.enggeo.2019.105306
Acknowledgements
The financial supports from National Natural Science Foundation of China (Nos. 51734009 and 51904290) and Natural Science Foundation of Jiangsu Province, China (No. BK20180663) are gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Meng, Y., Jing, H., Yin, Q. et al. Investigation on Mechanical and AE Characteristics of Yellow Sandstone Undergoing Wetting-Drying Cycles. KSCE J Civ Eng 24, 3267–3278 (2020). https://doi.org/10.1007/s12205-020-0572-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-020-0572-6