Abstract
This paper proposes a new type of steel-concrete composite deck, which is composed of orthotropic steel deck (OSD) with T-shaped ribs, concrete plate and studs connecting OSD and concrete plate. The OSD can act as framework for concrete plate and contribute to load bearing capacity at the same time, which could save construction time. Compared with conventional OSD system, this new type of composite bridge deck can also improve fatigue performance.
Considering that this type of composite deck is not yet applied in practical engineering and its mechanical performance is not revealed in previous literatures, two full-scale specimens were designed and manufactured in this research. The mechanical performance, particularly, bending capacity in positive and negative region was carefully tested and analyzed. The load-deflection curve, load-slip relation, strain distribution in concrete and steel were obtained. The test results showed that the plastic performance of this kind of composite bridge deck was satisfying and the bending capacity was high.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Yang Y D, Li T. The trend of the steel-concrete composite bridge in Japan. World Bridges, 1998, (4): 39–42
Wu C. Modern Steel Bridge. Beijing: China Communications Press, 2006
Muttoni A, Fernández Ruiz M. Concrete cracking in tension members and application to deck slabs of bridges. Journal of Bridge Engineering, 2007, 12(5): 646–653
Lachemi M, Hossain K M A, Ramcharitar M, Shehata M. Bridge deck rehabilitation practices in North America. Journal of Infrastructure Systems, 2007, 13(3): 225–234
Shiotani T, Ohtsu H, Momoki S, Chai H K, Onishi H, Kamada T. Damage evaluation for concrete bridge deck by means of stress wave techniques. Journal of Bridge Engineering, 2012, 17(6): 847–856
An Q H. Characteristic of stress in the joint between longitudinal U-rib and cross beam in orthotropic steel bridge deck. World Bridge, 2009(4): 26–29
Li Z X, Chan T H T, Ko J M. Fatigue damage model for bridge under traffic loading: Application made to Tsing Ma Bridge. Theoretical and Applied Fracture Mechanics, 2001, 35(1): 81–91
Battista R C, Pfeil M S, Carvalho E M L. Fatigue life estimates fora slender orthotropic steel deck. Journal of Constructional Steel Research, 2008, 64(1): 134–143
Huangi W, Lin G P, Qian Z D. Fracture-mechanics analysis of the fatigue life of the pavement on orthotropic steel bridge decks. China Civil Engineering Journal, 2006, 39(9): 112–116, 122 (in Chinese)
Chen J G. Preliminary study of design method of steel-concrete composite slab. Thesis for the Master’s Degree. Chengdu: Southwest Jiaotong University, 2004 (in Chinese)
Mäkeläinen P, Sun Y. The longitudinal shear behaviour of a new steel sheeting profile for composite floor slabs. Journal of Constructional Steel Research, 1999, 49(2): 117–128
Marčiukaitis G, Jonaitis B, Valivonis J. Analysis of deflections of composite slabs with profiled sheeting up to the ultimate moment. Journal of Constructional Steel Research, 2006, 62(8): 820–830
Marimuthu V, Seetharaman S, Arul Jayachandran S, Chellappan A, Bandyopadhyay T K, Dutta D. Experimental studies on composite deck slabs to determine the shear-bond characteristic (m-k) values of the embossed profiled sheet. Journal of Constructional Steel Research, 2007, 63(6): 791–803
Seres N, Dunai L. Experimental and numerical studies on concrete encased embossments of steel strips under shear action for composite slabs with profiled steel decking. Steel and Composite Structures, 2011, 11(1): 39–58
Kim H Y, Jeong Y J. Experimental investigation on behaviour of steel-concrete composite bridge decks with perfobond ribs. Journal of Constructional Steel Research, 2006, 62(5): 463–471
Kim H Y, Jeong Y J. Steel-concrete composite bridge deck slab with profiled sheeting. Journal of Constructional Steel Research, 2009, 65(8–9): 1751–1762
Kim H Y, Jeong Y J. Ultimate strength of a steel-concrete composite bridge deck slab with profiled sheeting. Engineering Structures, 2010, 32(2): 534–546
Ren J. Experimental study on fatigue of composite steel-concrete structure. Thesis for the Master’s Degree. Chengdu: Southwest Jiaotong University, 2006 (in Chinese)
China P R. Ministry of Communications. JTG D60-2015, General Code for Design of Highway Bridges and Culverts, 2015 (in Chinese)
China P R. Ministry of Housing and Urban-Rural Development. GB50010-2011, Code for design of concrete structures, 2011 (in Chinese)
Acknowledgements
This research was sponsored by Key Project of Chinese National Programs for Fundamental Research and Development (973 Program, No. 2013CB036303), the National Natural Science Foundation of China (Grant No. 51408424) and the Key Project of Jiangxi Province for Fundamental Research and Development (No. 20165ABC28001). These supports are gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Su, Q., Dai, C. & Jiang, X. Bending performance of composite bridge deck with T-shaped ribs. Front. Struct. Civ. Eng. 13, 990–997 (2019). https://doi.org/10.1007/s11709-019-0532-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11709-019-0532-8