Abstract
When the slope is in critical limit equilibrium (LE) state, the strength parameters have different contribution to each other on maintaining slope stability. That is to say that the strength parameters are not simultaneously reduced. Hence, the LE stress method is established to analyze the slope stability by employing the double strengthreduction (DSR) technique in this work. For calculation model of slope stability under the DSR technique, the general nonlinear Mohr–Coulomb (M–C) criterion is used to describe the shear failure of slope. Meanwhile, the average and polar diameter methods via the DSR technique are both adopted to calculate the comprehensive factor of safety (FOS) of slope. To extend the application of the polar diameter method, the original method is improved in the proposed method. After comparison and analysis on some slope examples, the proposed method’s feasibility is verified. Thereafter, the stability charts of slope suitable for engineering application are drawn. Moreover, the studies show that: (1) the average method yields similar results as that of the polardiameter method; (2) compared with the traditional uniform strength-reduction (USR) technique, the slope stability obtained using the DSR technique tends to be more unsafe; and (3) for a slope in the critical LE state, the strength parameter φ, i.e., internal friction angle, has greater contribution on the slope stability than the strength parameters c, i.e., cohesion.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bai B, Yuan W, Li XC (2014) A new double reduction method for slope stability analysis. Journal of Central South University, 21: 1158–1164. https://doi.org/10.1007/s11771-014-2049-6
Bishop AW (1955) The use of the slip circle in the stability analysis of earth slopes. Géotechnique 5: 7–17. https://doi.org/10.1680/geot.1955.5.1.7
Chang YL, Huang TK (2005) Slope stability analysis using strength reduction technique. Journal of Chinese Institute of Engineers 28: 231–240. https://doi.org/10.1080/02533839. 2005.9670990
Cheng YM, Lansivaara T, Wei WB (2007) Two-dimensional slope stability analysis by limit equilibrium and strength reduction methods. Computers and Geotechnics 34: 137–150. https://doi.org/10.1016/j.compgeo.2006.10.011
Dawson EM, Roth WH, Drescher A (1999) Slope stability analysis by strength reduction. Géotechnique 49: 835–840. https://doi.org/10.1680/geot.1999.49.6.835
Deng DP, Li L, Zhao LH (2011) A new method of sliding surface searching for general stability of slope based on Janbumethod. Rock and Soil Mechanics 32: 891–898. (In Chinese)
Deng DP, Zhao LH, Li L (2015) Limit equilibrium slope stability analysis using the nonlinear strength failure criterion. Canadian Geotechnical Journal 52: 563–576. https://doi. org/10.1139/cgj-2014-0111
Deng DP, Li L, Wang JF, Zhao LH (2016) Limit equilibrium method for rock slope stability analysis by using the Generalized Hoek-Brown criterion. International Journal of Rock Mechanics and Mining Sciences 89: 176–184. https://doi.org/10.1016/j.ijrmms.2016.09.007
Eid HT (2010) Two- and three-dimensional analyses of translational slides in soils with nonlinear failure envelopes. Canadian Geotechnical Journal 47: 388–399. https://doi. org/10.1139/T09-110
Fu WX, Liao Y (2010) Non-linear shear strength reduction technique in slope stability calculation. Computers and Geotechnics 37: 288–298. https://doi.org/10.1016/j.compgeo. 2009.11.002
Isakov A, Moryachkov Y (2014) Estimation of slope stability using two-parameter criterion of stability. International Journal of Geomechanics 14: 613–624. https://doi.org/ 10.1061/(ASCE)GM.1943-5622.0000326
Jiang JC, Baker R, Yamagami T (2003) The effect of strength envelope nonlinearity on slope stability computations. Canadian Geotechnical Journal 40: 308–325. https://doi. org/10.1139/t02-111
Jiang XY, Wang ZG, Liu LY, Zhou ZP (2013) The determination of reduction ratio factor in homogeneous soil-slope with finite element double strength reduction method. The Open Civil Engineering Journal 7: 205–209. https://doi.org/10.2174/ 1874149501307010205
Kelesoglu MK (2016) The evaluation of three-dimensional effects on slope stability by the strength reduction method. KSCE Journal of Civil Engineering 20: 229–242. https://doi. org/10.1007/s12205-015-0686-4
Larochelle P, Skempton AW (1965) Thebradwell slip: a shortterm failure in london clay. Géotechique 15: 221–242. https://doi.org/10.1680/geot.1965.15.3.221
Morgenstern NR, Price VE (1965) The analysis of the stability of general slip surfaces. Géotechnique 15: 79–93. https://doi.org/10.1680/geot.1965.15.1.79
Nian TK, Huang RQ, Wan SS, Chen GQ (2012) Threedimensional strength-reduction finite element analysis of slopes: geometric effects. Canadian Geotechnical Journal 49: 574–588. https://doi.org/10.1139/t2012-014
Spencer E (1967) A method of analysis of the stability of embankments assuming parallel inter-slice forces. Géotechnique 17: 11–26. https://doi.org/10.1680/geot.1967. 17.1.11
Sun CW, Chai JR, Xu AG, Qin Y (2017) 3D stability charts for convex and concave slopes in plan view with homogeneous soil based on the strength-reduction method. International Journal of Geomechanics 17: 1–11. https://doi.org/10.1061/ (ASCE)GM.1943-5622.0000809
Tschuchnigg F, Schweiger HF, Sloan SW (2015) Slope stability analysis by means of finite element limit analysis and finite element strength reduction techniques. Part I: Numerical studies considering non-associated plasticity. Computers and Geotechnics 70: 169–177. https://doi.org/10.1016/j.compgeo. 2015.06.018
Acknowledgements
This study was funded by the National Natural Science Foundation of China (Grant No. 51608541), the Postdoctoral Science Foundation of China (Grant No. 2015M580702), and the Guizhou Provincial Department of Transportation of China (Grant No. 2014122006).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Deng, Dp., Li, L. & Zhao, Lh. Limit equilibrium method (LEM) of slope stability and calculation of comprehensive factor of safety with double strength-reduction technique. J. Mt. Sci. 14, 2311–2324 (2017). https://doi.org/10.1007/s11629-017-4537-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11629-017-4537-2