Abstract
AlMoON based solar selective absorption coatings were deposited on stainless steel substrate by magnetron sputtering. The coatings included infrared reflection layer Mo, absorption layer AlMoN, absorption layer AlMoON and antireflection layer AlMoO from bottom to top. The surface of the deposited coatings is flat without obvious defects. The absorptivity and emissivity are 0.896 and 0.09, respectively, and the quality factor is 9.96. After heat treatment at 500 °C-36 h, the surface roughness of the coating increases, a small number of cracks and other defects appear, and the broken part is still attached to the coating surface. A certain degree of element diffusion occurs in the coatings, resulting in the decline of the optical properties of the coatings. The absorptivity and emissivity are 0.883 and 0.131, respectively, the quality factor is 7.06, and the PC value is 0.0335. The coatings do not fail under this condition and have certain thermal stability.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Xue YF, Wang C, Sun Y, et al. Effects of the LMVF and HMVF Absorption Layer Thickness and Metal Volume Fraction on Optical Properties of the MoSi2-Al2O3 Solar Selective Absorbing Coating[J]. Vacuum, 2014, 104: 116–121
Antonaia A, Castaldo A, Addonizio ML, et al. Stability of W-AAl2O3 Cermet Based Solar Coating for Receiver Tube Operating at High Temperature[J]. Solar Energy Materials and Solar Cells, 2010, 94(10): 1604–1611
Zhao K, Jin HG, Gai ZR, et al. A Thermal Efficiency-enhancing Strategy of Parabolic Trough Collector Systems by Cascadingly Applying Multiple Solar Selective-absorbing Coatings[J]. Applied Energy, 2022, 309: 118 508
Cao F, McEnaney K, Chen G, et al. A Review of Cermet-based Spectrally Selective Solar Absorbers[J]. Energy & Environmental Science, 2014, 7(5): 1615–1627
Cheng CL, Liu CC, Dai MZ. Physical and Photovoltaic Characteristics of Copper Oxide Thin Films as Hole-selective Layers for Sscreen-printed Mono-crystalline Silicon Solar Cell Applications[J]. Vacuum, 2022, 197: 110 805
Farhadizadeh A, Kozák T. The Importance of Discharge Voltage in DC Magnetron Sputtering for Energy of Sputtered and Backscattered Atoms on the Substrate: Monte-Carlo Simulations[J]. Vacuum, 2022, 196: 110 716
Selvakumar N, Barshilia HC. Review of Physical Vapor Deposited (PVD) Spectrally Selective Coatings for Mid- and high-temperature Solar Thermal Applications[J]. Solar Energy Materials & Solar Cells, 2012, 98(5): 1–23
Xue YF, Wang C, Sun Y, et al. Preparation and Spectral Properties of Solar Selective Absorbing MoSi2-Al2O3 Coating [J]. Applications and materials science, 2014, 211: 1519–1524
Zheng LQ, Gao F, Zhao S, et al. Optical Design and Co-sputtering Preparation of High Performance Mo-SiO2 Cermet Solar Selective Absorbing Coating[J]. Applied Surface Science, 2013, 280: 240–246
Setién-Fernández I, Echániz T, González-Fernández L, et al. First Spectral Emissivity Study of a Solar Selective Coating in the 150–600°C Temperature Range[J]. Solar Energy Materials and Solar Cells, 2013, 117: 390–395
Céspedes E, Wirz M, Sánchez-García JA, et al. Novel Mo-Si3N4 Based Selective Coating for High Temperature Concentrating Solar Power Applications[J]. Solar Energy Materials and Solar Cells, 2014, 122: 217–225
Xu A, Chen QZ, Huang ZJ, et al. Effect of Al Layer on Oxidation Behavior of NbCrAl Coating[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2019, 34(2): 391–396
Barshilia HC, Selvakumar N, Rajam KS, et al. Deposition and Characterization of TiAlN/TiAlON/Si3N4 Tandem Absorbers Prepared Using Reactive Direct Current Magnetron Sputtering[J]. Thin Solid Films, 2008, 516(18): 6071–6078
Yin Y, Hang L, Zhang S, et al. Thermal Oxidation Properties of Titanium Nitride and Titanium-aluminum Nitride Materials - A Perspective for High Temperature Air-stable Solar Selective Absorber Applications[J]. Thin Solid Films, 2007, 515(5): 2829–2832
Wu YW, Zheng WF, Lin LM, et al. Colored Solar Selective Absorbing Coatings with Metal Ti and Dielectric AlN Multilayer Structure[J]. Solar Energy Materials and Solar Cells, 2013, 115: 145–150
Du M, Liu XP, Hao L, et al. Microstructure and Thermal Stability of Al/Ti0.5Al0.5N/Ti0.25Al0.75N/AlN Solar Selective Coating[J]. Solar Energy Materials and Solar Cells, 2013, 111: 49–56
Liu HD, Wan Q, Lin BZ, et al. The Spectral Properties and Thermal Atability of CrAlO-based Solar Selective Absorbing Nanocomposite Coating[J]. Solar Energy Materials and Solar Cells, 2014, 122: 226–232
Barshilia HC, Kumar P, Rajam KS, et al. Structure and Optical Properties of Ag-Al2O3 Nanocermet Solar Selective Coatings Prepared Using Unbalanced Magnetron Sputtering[J]. Solar Energy Materials & Solar Cells, 2011, 95(7): 1707–1715
Nunes C, Teixeira V, Prates ML, et al. Graded Selective Coatings Based on Chromium and Titanium Oxynitride[J]. Thin Solid Films, 2003, 442(1): 173–178
Li QY, Gong DQ, Cheng XD. Thickness Dependence of Structural and Optical Properties of Chromium Thin Films as an Infrared Reflector for Solar-thermal Conversion Applications[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2019, 38(6): 1239–1247
Gaouyat L, Mirabella F, Deparis O. Critical Tuning of Magnetron Sputtering Process Parameters for Optimized Solar Selective Absorption of NiCrOx Cermet Coatings on Aluminium Substrate[J]. Applied Surface Science, 2013, 271: 113–117
Gaouyat L, He Z, Colomer JF, et al. Revealing the Innermost Nanostructure of Sputtered NiCrOx Solar Absorber Cermets[J]. Solar Energy Materials and Solar Cells, 2014, 122: 303–308
Wang XB, Li KW, Cheng XD. Resistant Transition-metal-nitrides Based Coatings for Solar Energy Conversion[J]. Journal of the European Ceramic Society, 2021, 41(7): 4076–4085
Schüler A, Thommen V, Reimann P, et al. Structural and Optical Properties of Titanium Aluminum Nitride Films (Ti(1−x)AlxN)[J]. Journal of Vacuum Science & Technology, A. Vacuum, Surfaces, and Films, 2001, 19(3): 922–929
Gong DQ, Cheng XD, Ye WP, et al. The Effect of Annealing Under Non-Vacuum on the Optical Properties of TiAlN Non-Vacuum Solar Selective Absorbing Coating prepared by Cathodic Arc Evaporation[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2013, 28(2): 256–260
Valleti K, Murali Krishna D, and Joshi SV. Functional Multi-layer Nitride Coatings for High Temperature Solar Selective Applications[J]. Solar Energy Materials and Solar Cells, 2014, 121: 14–21
Gong H, Shao W, Ma XT, et al. Absorption Properties of a Multilayer Composite Nanoparticle for Solar Thermal Utilization[J]. Optics and Laser Technology, 2022, 150: 107 914
Danlée Y, Mederos-Henry F, et al. Ranking Broadband Microwave Absorption Performance of Multilayered Polymer Nanocomposites Containing Carbon and Metallic Nanofillers[M]. Prime Archives in Material Science: 3rd Edition, 2021
Zhang Q, Mills DR. New Cermet Film Structures with Much Improved Selectivity for Solar Thermal Applications[J]. Applied Physics Letters, 1992, 60: 545–547
Liu HD, Yang B, Mao MR, et al. Enhanced Thermal Stability of Solar Selective Absorber Based on Nano-multilayered TiAlON Films Deposited by Cathodic Arc Evaporation[J]. Applied Surface Science, 2020, 501: 144 025
Du M, Hao L, Mi J, et al. Optimization Design of Ti0.5Al0.5N/Ti0.25Al0.75N/AlN Coating Used for Solar Selective Applications[J]. Solar Energy Materials and Solar Cells, 2011, 95(4): 1193–1196
Jyothi J, Chaliyawala Ha, Srinivas G, et al. Design and Fabrication of Spectrally Selective TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO Tandem Absorber for High-temperature Solar Thermal Power Applications[J]. Solar Energy Materials and Solar Cells, 2015, 140: 209–216
Wang XB, Yuan XP, Gong DQ, et al. Optical Properties and Thermal Stability of AlCrON-Based Multilayer Solar Selective Absorbing Coating for High Temperature Applications[J]. Journal of Materials Research and Technology, 2021, 15: 6162–6174
Min J, Gu L, Chen YF, et al. Damping Performance of Mo-based Coatings Prepared by Supersonic Arc Spraying[J]. Surface Engineering, 2021, 37(11): 1388–1395
Greczynski G, Hultman L. X-ray Photoelectron Spectroscopy: Towards Reliable Binding Energy Referencing[J]. Progress in Materials Science, 2020, 107: 100 591
Greczynski G, Hultman L. C 1s peak of Adventitious Carbon Aligns to the Vacuum Level: Dire Consequences for Material’s Bonding Assignment by Photoelectron Sectroscopy[J]. Chem. Phys. Chem., 2017, 18(12): 1507–1512
Greczynski G, Hultman L. The Same Chemical State of Carbon Gives Rise to Two Peaks in X-ray Photoelectron Spectroscopy[J]. Scientific Reports, 2021, 11(1): 1–5
Greczynski G, Hultman L. Reliable Determination of Chemical State in x-ray Photoelectron Spectroscopy Based on Sample-work-function Referencing to Adventitious Carbon: Resolving the Myth of Apparent Constant Binding Energy of the C 1s Peak[J]. Applied Surface Science, 2018, 451: 99–103
Huang B, Liu LT, Du HM, et al. Effect of Nitrogen Flow Rate on the Microstructure, Mechanical and Tribological Properties of CrAlTiN Coatings Prepared by Arc Ion Plating[J]. Vacuum, 204: 111 336
Liu Y, Ding JC, Zhang BR, Chen JJ, et al. Effect of Duty Cycle on Microstructure and Mechanical Properties of AlCrN Coatings Deposited by HiPIMS[J]. Vacuum, 2022, 205: 111 409
Greczynski G, Hultman L. Compromising Science by Ignorant Instrument Calibration-Need to Revisit Half a Century of Published XPS Data[J]. Angew. Chem. Int. Ed., 2020, 59: 5002–5006
Selvakumar N, Rajaguru K, Gouda GM, et al. AlMoN Based Spectrally Selective Coating with Improved Thermal Stability for High Temperature Solar Thermal Applications[J]. Solar Energy, 2015(119): 114–121
Selvakumar N, Santhoshkumar S, Basu S, et al. Spectrally Selective CrMoN/CrON Tandem Absorber for Mid-temperature Solar Thermal Applications[J]. Solar Energy Materials & Solar Cells, 2013(109): 97–103
Blaz L, Wloch G, Lobry P, et al. Structural Aspect of Chemical Reaction Between Components of Mechanically Alloyed Al-MoO2 and Al-MoO3 Composites[J]. Journal of Alloys and Compounds, 2017 (695): 1096–1103
Mukhopadhyay S, Sahimi M. Calculation of the Effective Permeabilities of Field-scale Porous Media [J]. Chemical Engineering Science, 2000, 55(20): 4495–4513
Kennedy CE, Price H. Progress in Development of High-temperature Solar-selective Coating [C]. In: American Society of Mechanical Engineers. Internation.al Solar Energy Conference, Solar Engineering 2005-Proceedings of the 2005 International Solar Energy Conference, New York: American Society of Mechanical Engineers, 2005
Zhang CY, Cao HW, Dong H, et al. Influence of a TiAlN Coating on the Mechanical Properties of a Heat Resistant Steel at Room Temperature and 650C[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2013, 28(5): 1029–1033
Zhu TK, Wang DG, Luo X. Effect of C/Mo Duplex-coating on Thermal Residual Stresses in SiCf/Ti2AlNb Composites[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2021, 36(4): 526–532
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
All authors declare that there are no competing interests.
Additional information
Funded by the National Natural Science Foundation of China (No.52002159), the Open Foundation of Hubei Provincial Key Laboratory of Green Materials for Light Industry(No.201611B12), and the Open Fund of Science and Technology on Thermal Energy and Power Laboratory (No.TPL2018A03)
Rights and permissions
About this article
Cite this article
Min, J., Yuan, W., Chen, Y. et al. Preparation and Thermal Stability of AlMoON Based Solar Selective Absorption Coating. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 39, 854–862 (2024). https://doi.org/10.1007/s11595-024-2946-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11595-024-2946-y