Abstract
This paper reports on the preparation of Fe82.7-85.7Si2-4.9B9.2-11.2P1.5-2.7C0.8 soft magnetic amorphous alloys with a distinctly high Fe content of 93.5-95.5 wt.% by component design and composition adjustment. All alloys can be readily fabricated into completely amorphous ribbon samples with good surface quality by the single copper roller melt-spinning method. These alloys show good bending ductility and excellent magnetic properties after annealing, i.e., low coercivity (H c) of 3.3-5.9 A/m, high permeability (μ e) of 5000-10000 and high flux saturation density (B s) of 1.63-1.66 T. The mechanism of the good glass forming ability (GFA) and soft-magnetic properties are explored. The amorphous alloys with the high Fe content comparable to that of the desired high Si alloy can be promising candidates for the potential application in electric devices.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
T. Kubota, M. Fujikura, and Y. Ushigami, J. Magn. Magn. Mater. 215-216, 69 (2000).
T. Ros-Yañez, Y. Houbaert, and V. Go´mez Rodri´guez, J. Appl. Phys. 91, 7857 (2002).
J. H. Yu, J. S. Shin, J. S. Bae, Z. H. Lee, T. D. Lee, H. M. Lee, and E. J. Lavernia, Mater. Sci. Eng. A 307, 29 (2001).
H. Haiji, K. Okada, T. Hiratani, M. Abe, and M. Ninomiya, J. Magn. Magn. Mater. 160, 109 (1996).
H. T. Liu, H. Z. Li, H. L. Li, F. Gao, G. H. Liu, Z. H. Luo, F. Q. Zhang, S. L. Chen, G. M. Cao, Z. Y. Liu, and G. D. Wang, J. Magn. Magn. Mater. 65, 391 (2015).
Z. W. Zhang, W. H. Wang, Y. Zou, I. Baker, D. Chen, and Y. F. Liang, J. Alloys Compd. 639, 40 (2015).
A. Inoue, Y. Shinohara, and J. S. Gook, Mater. Trans. JIM 36, 1427 (1995).
X. Wang, W. Zhang, Z. Liu, H. Li, and G. Wang, Mater. Charact. 122, 206 (2016).
K. Mohri, and S. Korekoda, IEEE Trans. Magn. 14, 1071 (1978).
A. Inoue, A. Makino, and T. Mizushima, J. Magn. Magn. Mater. 215-216, 246 (2000).
Z. B. Jiao, H. X. Li, Y. Wu, J. E. Gao, S. L. Wang, S. Yi, and Z. P. Lu, Sci. China-Phys. Mech. Astron. 53, 430 (2010).
C. Chang, C. Qin, A. Makino, and A. Inoue, J. Alloys Compd. 533, 67 (2012).
K. Suzuki, A. Makino, N. Kataoka, A. Inoue, and T. Masumoto, Mater. Trans. JIM 32, 93 (1991).
A. Wang, C. Zhao, H. Men, A. He, C. Chang, X. Wang, and R. W. Li, J. Alloys Compd. 630, 209 (2015).
M. Ohta, and Y. Yoshizawa, Mater. Jpn. 48, 126 (2009).
C. Chang, T. Kubota, A. Makino, and A. Inoue, J. Alloys Compd. 473, 368 (2009).
E. P. Barth, F. Spaepen, R. Bye, and S. K. Das, Acta Mater. 45, 423 (1997).
C. Zhao, A. Wang, A. He, S. Yue, C. Chang, X. Wang, and R. W. Li, J. Alloys Compd. 659, 193 (2016).
A. Wang, C. Zhao, A. He, H. Men, C. Chang, and X. Wang, J. Alloys Compd. 656, 729 (2016).
P. Jalali, and M. Li, Intermetallics 12, 1167 (2004).
G. Kumar, M. Ohnuma, T. Furubayashi, T. Ohkubo, and K. Hono, J. Non-Crystal. Solids 354, 882 (2008).
R. Sahingoz, M. Erol, and M. R. J. Gibbs, J. Magn. Magn. Mater. 271, 74 (2004).
G. Herzer, and H. R. Hilzinger, J. Magn. Magn. Mater. 62, 143 (1986).
H. Kronmuller, M. Fahnle, M. Domann, H. Grimm, R. Grimm, and B. Groger, J. Magn. Magn. Mater. 13, 53 (1979).
A. Inoue, A. Makino, and T. Mizushima, J. Magn. Magn. Mater. 215-216, 246 (2000).
W. K. An, D. W. Ding, A. H. Cai, G. J. Zhou, Y. Luo, J. H. Li, and Y. Y. Peng, Sci. China-Phys. Mech. Astron. 58, 066101 (2015).
Z. P. Chen, J. E. Gao, Y. Wu, H. Wang, X. J. Liu, and Z. P. Lu, Sci. China-Phys. Mech. Astron. 57, 122 (2014).
T. Bitoh, A. Makino, and A. Inoue, Mater. Trans. 44, 2020 (2003).
Y. C. Niu, X. F. Bian, and W. M. Wang, J. Non-Crystal. Solids 341, 40 (2004).
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Chen, P., Wang, A., Zhao, C. et al. Development of soft magnetic amorphous alloys with distinctly high Fe content. Sci. China Phys. Mech. Astron. 60, 106111 (2017). https://doi.org/10.1007/s11433-017-9051-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11433-017-9051-6