Abstract
Recently tremendous progress has been evidenced by the advancements in developing innovative three-dimensional (3D) scaffolds using various techniques for addressing the autogenous grafting of bone. In this work, we demonstrated the fabrication of porous polycaprolactone (PCL) scaffolds for osteogenic differentiation based on supercritical fluid-assisted hybrid processes of phase inversion and foaming. This eco-friendly process resulted in the highly porous biomimetic scaffolds with open and interconnected architectures. Initially, a 23 factorial experiment was designed for investigating the relative significance of various processing parameters and achieving better control over the porosity as well as the compressive mechanical properties of the scaffold. Then, single factor experiment was carried out to understand the effects of various processing parameters on the morphology of scaffolds. On the other hand, we encapsulated a growth factor, i.e., bone morphogenic protein-2 (BMP-2), as a model protein in these porous scaffolds for evaluating their osteogenic differentiation. In vitro investigations of growth factor loaded PCL scaffolds using bone marrow stromal cells (BMSCs) have shown that these growth factor-encumbered scaffolds were capable of differentiating the cells over the control experiments. Furthermore, the osteogenic differentiation was confirmed by measuring the cell proliferation, and alkaline phosphatase (ALP) activity, which were significantly higher demonstrating the active bone growth. Together, these results have suggested that the fabrication of growth factor-loaded porous scaffolds prepared by the eco-friendly hybrid processing efficiently promoted the osteogenic differentiation and may have a significant potential in bone tissue engineering.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
An, J., Teoh, J.E.M., Suntornnond, R., and Chua, C.K. (2015). Design and 3D printing of scaffolds and tissues. Engineering 1, 261–268.
Autissier, A., Le Visage, C., Pouzet, C., Chaubet, F., and Letourneur, D. (2010). Fabrication of porous polysaccharide-based scaffolds using a combined freeze-drying/cross-linking process. Acta Biomater 6, 3640–3648.
Brydone, A.S., Meek, D., and Maclaine, S. (2010). Bone grafting, orthopaedic biomaterials, and the clinical need for bone engineering. Proc Inst Mech Eng H 224, 1329–1343.
Cabraja, M. and Kroppenstedt, S. (2012). Bone grafting and substitutes in spine surgery. J Neurosurg Sci 56, 87–95.
Cai, Y., Tong, S., Zhang, R., Zhu, T., and Wang, X. (2018). In vitro evaluation of a bone morphogenetic protein-2 nanometer hydroxyapatite collagen scaffold for bone regeneration. Mol Med Report 17, 5830.
Cao, Z., Wang, D., Li, Y., Xie, W., Wang, X., Tao, L., Wei, Y., Wang, X., and Zhao, L. (2018). Effect of nanoheat stimulation mediated by magnetic nanocomposite hydrogel on the osteogenic differentiation of mesenchymal stem cells. Sci China Life Sci 61, 448–456.
Chen, B., Kankala, R.K., Chen, A., Yang, D., Cheng, X., Jiang, N., Zhu, K., and Wang, S. (2017). Investigation of silk fibroin nanoparticledecorated poly(L-lactic acid) composite scaffolds for osteoblast growth and differentiation. Int J Nanomed 12, 1877–1890.
Chen, C., Liu, Q., Xin, X., Guan, Y., and Yao, S. (2016). Pore formation of poly(ε-caprolactone) scaffolds with melting point reduction in supercritical CO2 foaming. J Supercrit Fluids 117, 279–288.
Choudhury, M., Mohanty, S., and Nayak, S. (2015). Effect of different solvents in solvent casting of porous pla scaffolds—in biomedical and tissue engineering applications. J Biomater Tissue Eng 5, 1–9.
Custódio, C.A., Reis, R.L., and Mano, J.F. (2014). Engineering biomolecular microenvironments for cell instructive biomaterials. Adv Healthc Mater 3, 797–810.
Davies, O.R., Lewis, A.L., Whitaker, M.J., Tai, H., Shakesheff, K.M., and Howdle, S.M. (2008). Applications of supercritical CO2 in the fabrication of polymer systems for drug delivery and tissue engineering. Adv Drug Deliver Rev 60, 373–387.
Delmote, J., Teruel-Biosca, L., Gómez Ribelles, J.L., and Gallego Ferrer, G. (2017). Emulsion based microencapsulation of proteins in poly(Llactic acid) films and membranes for the controlled release of drugs. Polym Degrad Stabil 146, 24–33.
de Matos, M.B.C., Piedade, A.P., Alvarez-Lorenzo, C., Concheiro, A., Braga, M.E.M., and de Sousa, H.C. (2013). Dexamethasone-loaded poly(-caprolactone)/silica nanoparticles composites prepared by supercritical CO2 foaming/mixing and deposition. Int J Pharm 456, 269–281.
de Matos, M.B.C., Puga, A.M., Alvarez-Lorenzo, C., Concheiro, A., Braga, M.E.M., and de Sousa, H.C. (2015). Osteogenic poly(ε-caprolactone)/poloxamine homogeneous blends prepared by supercritical foaming. Int J Pharm 479, 11–22.
Declercq, H.A., Desmet, T., Berneel, E.E.M., Dubruel, P., and Cornelissen, M.J. (2013). Synergistic effect of surface modification and scaffold design of bioplotted 3-D poly-ε-caprolactone scaffolds in osteogenic tissue engineering. Acta Biomater 9, 7699–7708.
Deng, A., Chen, A., Wang, S., Li, Y., Liu, Y., Cheng, X., Zhao, Z., and Lin, D. (2013). Porous nanostructured poly-L-lactide scaffolds prepared by phase inversion using supercritical CO2 as a nonsolvent in the presence of ammonium bicarbonate particles. J Supercrit Fluids 77, 110–116.
Diaz-Gomez, L., Concheiro, A., Alvarez-Lorenzo, C., and García-González, C.A. (2016a). Growth factors delivery from hybrid PCLstarch scaffolds processed using supercritical fluid technology. Carbohyd Polym 142, 282–292.
Diaz-Gomez, L., Yang, F., Jansen, J.A., Concheiro, A., Alvarez-Lorenzo, C., and García-González, C.A. (2016b). Low viscosity-PLGA scaffolds by compressed CO2 foaming for growth factor delivery. RSC Adv 6, 70510–70519.
Duarte, A.R.C., Mano, J.F., and Reis, R.L. (2009). Perspectives on: supercritical fluid technology for 3D tissue engineering scaffold applications. J Bioact Compat Polym 24, 385–400.
Fanovich, M.A., Ivanovic, J., Misic, D., Alvarez, M.V., Jaeger, P., Zizovic, I., and Eggers, R. (2013). Development of polycaprolactone scaffold with antibacterial activity by an integrated supercritical extraction and impregnation process. J Supercrit Fluids 78, 42–53.
Hegde, C., Shetty, V., Wasnik, S., Ahammed, I., and Shetty, V. (2013). Use of bone graft substitute in the treatment for distal radius fractures in elderly. Eur J Orthop Surg Traumatol 23, 651–656.
Hile, D.D., Amirpour, M.L., Akgerman, A., and Pishko, M.V. (2000). Active growth factor delivery from poly(D,L-lactide-co-glycolide) foams prepared in supercritical CO2. J Control Releas 66, 177–185.
Jing, X., Mi, H., Cordie, T., Salick, M., Peng, X., and Turng, L.S. (2014). Fabrication of porous poly(ε-caprolactone) scaffolds containing chitosan nanofibers by combining extrusion foaming, leaching, and freeze-drying methods. Ind Eng Chem Res 53, 17909–17918.
Kankala, R.K., Zhu, K., Li, J., Wang, C., Wang, S., and Chen, A. (2017a). Fabrication of arbitrary 3D components in cardiac surgery: from macro-, micro- to nanoscale. Biofabrication 9, 032002.
Kankala, R.K., Zhang, Y., Wang, S., Lee, C.H., and Chen, A. (2017b). Supercritical fluid technology: an emphasis on drug delivery and related biomedical applications. Adv Healthc Mater 6, 1700433.
Kankala, R.K., Zhu, K., Sun, X., Liu, C., Wang, S., and Chen, A. (2018a). Cardiac tissue engineering on the nanoscale. ACS Biomater Sci Eng 4, 800–818.
Kankala, R.K., Xu, X., Liu, C., Chen, A., and Wang, S. (2018b). 3D-printing of microfibrous porous scaffolds based on hybrid approaches for bone tissue engineering. Polymers 10, 807.
Kankala, R.K., Chen, B., Liu, C., Tang, H., Wang, S., and Chen, A. (2018c). Solution-enhanced dispersion by supercritical fluids: an ecofriendly nanonization approach for processing biomaterials and pharmaceutical compounds. Int J Nanomed 13, 4227–4245.
Kim, H.Y., Kim, H.N., Lee, S.J., Song, J.E., Kwon, S.Y., Chung, J.W., Lee, D., and Khang, G. (2017). Effect of pore sizes of PLGA scaffolds on mechanical properties and cell behaviour for nucleus pulposus regeneration in vivo. J Tissue Eng Regen Med 11, 44–57.
Krause, B., Mettinkhof, R., van der Vegt, N.F.A., and Wessling, M. (2001). Microcellular foaming of amorphous high-T g polymers using carbon dioxide. Macromolecules 34, 874–884.
Lee, S.J., Lee, D., Yoon, T.R., Kim, H.K., Jo, H.H., Park, J.S., Lee, J.H., Kim, W.D., Kwon, I.K., and Park, S.A. (2016). Surface modification of 3D-printed porous scaffolds via mussel-inspired polydopamine and effective immobilization of rhBMP-2 to promote osteogenic differentiation for bone tissue engineering. Acta Biomater 40, 182–191.
Lenas, P., and Ikonomou, L. (2018). Developmental engineering: design of clinically efficacious bioartificial tissues through developmental and systems biology. Sci China Life Sci 61, 978–981.
Lian, Z., Epstein, S.A., Blenk, C.W., and Shine, A.D. (2006). Carbon dioxide-induced melting point depression of biodegradable semicrystalline polymers. J Supercrit Fluids 39, 107–117.
Luo, G., Huang, Y., and Gu, F. (2017). RhBMP2-loaded calcium phosphate cements combined with allogenic bone marrow mesenchymal stem cells for bone formation. Biomed Pharmacother 92, 536–543.
Mao, J., Duan, S., Song, A., Cai, Q., Deng, X., and Yang, X. (2012). Macroporous and nanofibrous poly(lactide-co-glycolide)(50/50) scaffolds via phase separation combined with particle-leaching. Mater Sci Eng-C 32, 1407–1414.
Mathieu, L.M., Montjovent, M.O., Bourban, P.E., Pioletti, D.P., and Månson, J.A.E. (2005). Bioresorbable composites prepared by supercritical fluid foaming. J Biomed Mater Res 75A, 89–97.
Mathieu, L.M., Mueller, T.L., Bourban, P.E., Pioletti, D.P., Müller, R., and Månson, J.A.E. (2006). Architecture and properties of anisotropic polymer composite scaffolds for bone tissue engineering. Biomaterials 27, 905–916.
Moshiri, A., and Oryan, A. (2012). Role of tissue engineering in tendon reconstructive surgery and regenerative medicine: current concepts, approaches and concerns. Hard Tissue 1, 11.
Nam, Y.S., Yoon, J.J., and Park, T.G. (2015). A novel fabrication method of macroporous biodegradable polymer scaffolds using gas foaming salt as a porogen additive. J Biomed Mater Res 53, 1–7.
Oryan, A., Alidadi, S., Moshiri, A., and Maffulli, N. (2014). Bone regenerative medicine: classic options, novel strategies, and future directions. J Orthop Surg Res 9, 18.
Park, K.H., Kim, H., Moon, S., and Na, K. (2009). Bone morphogenic protein-2 (BMP-2) loaded nanoparticles mixed with human mesenchymal stem cell in fibrin hydrogel for bone tissue engineering. J Biosci Bioeng 108, 530–537.
Qu, X., Cao, Y., Chen, C., Die, X., and Kang, Q. (2014). A poly(lactide-coglycolide) film loaded with abundant bone morphogenetic protein-2: a substrate-promoting osteoblast attachment, proliferation, and differentiation in bone tissue engineering. J Biomed Mater Res 103, 2786–2796.
Rajabzadeh, S., Liang, C., Ohmukai, Y., Maruyama, T., and Matsuyama, H. (2012). Effect of additives on the morphology and properties of poly (vinylidene fluoride) blend hollow fiber membrane prepared by the thermally induced phase separation method. J Membrane Sci 423–424, 189–194.
Salerno, A., Clerici, U., and Domingo, C. (2014a). Solid-state foaming of biodegradable polyesters by means of supercritical CO2/ethyl lactate mixtures: towards designing advanced materials by means of sustainable processes. Eur Polymer J 51, 1–11.
Salerno, A., Fanovich, M.A., and Pascual, C.D. (2014b). The effect of ethyl-lactate and ethyl-acetate plasticizers on PCL and PCL-HA composites foamed with supercritical CO2. J Supercrit Fluids 95, 394–406.
Salerno, A., Diéguez, S., Diaz-Gomez, L., Gómez-Amoza, J.L., Magariños, B., Concheiro, A., Domingo, C., Alvarez-Lorenzo, C., and García-González, C.A. (2017). Synthetic scaffolds with full pore interconnectivity for bone regeneration prepared by supercritical foaming using advanced biofunctional plasticizers. Biofabrication 9, 035002.
Shen, X., Zhang, Y., Gu, Y., Xu, Y., Liu, Y., Li, B., and Chen, L. (2016). Sequential and sustained release of SDF-1 and BMP-2 from silk fibroinnanohydroxyapatite scaffold for the enhancement of bone regeneration. Biomaterials 106, 205–216.
Singh, L., Kumar, V., and Ratner, B.D. (2004). Generation of porous microcellular 85/15 poly (DL-lactide-co-glycolide) foams for biomedical applications. Biomaterials 25, 2611–2617.
Tomasko, D.L., Li, H., Liu, D., Han, X., Wingert, M.J., Lee, L.J., and Koelling, K.W. (2003). A review of CO2 applications in the processing of polymers. Ind Eng Chem Res 42, 6431–6456.
Tsuji, K., Bandyopadhyay, A., Harfe, B.D., Cox, K., Kakar, S., Gerstenfeld, L., Einhorn, T., Tabin, C.J., and Rosen, V. (2006). BMP2 activity, although dispensable for bone formation, is required for the initiation of fracture healing. Nat Genet 38, 1424–1429.
White, L.J., Hutter, V., Tai, H., Howdle, S.M., and Shakesheff, K.M. (2012). The effect of processing variables on morphological and mechanical properties of supercritical CO2 foamed scaffolds for tissue engineering. Acta Biomater 8, 61–71.
Woodruff, M.A., and Hutmacher, D.W. (2010). The return of a forgotten polymer—polycaprolactone in the 21st century. Prog Polymer Sci 35, 1217–1256.
Xie, Y., Song, W., Zhao, W., Gao, Y., Shang, J., Hao, P., Yang, Z., Duan, H., and Li, X. (2018). Application of the sodium hyaluronate-cntf scaffolds in repairing adult rat spinal cord injury and facilitating neural network formation. Sci China Life Sci 61, 559–568.
Yano, K., Hoshino, M., Ohta, Y., Manaka, T., Naka, Y., Imai, Y., Sebald, W., and Takaoka, K. (2009). Osteoinductive capacity and heat stability of recombinant human bone morphogenetic protein-2 produced by Escherichia coli and dimerized by biochemical processing. J Bone Miner Metab 27, 355–363.
Yang, D., Chen, A., Wang, S., Li, Y., Tang, X., and Wu, Y. (2015). Preparation of poly(L-lactic acid) nanofiber scaffolds with a rough surface by phase inversion using supercritical carbon dioxide. Biomed Mater 10, 035015.
Zeltinger, J., Sherwood, J.K., Graham, D.A., Müeller, R., and Griffith, L.G. (2001). Effect of pore size and void fraction on cellular adhesion, proliferation, and matrix deposition. Tissue Eng 7, 557–572.
Zhao, G., Cao, Y., Zhu, X., Tang, X., Ding, L., Sun, H., Li, J., Li, X., Dai, C., Ru, T., et al. (2017). Transplantation of collagen scaffold with autologous bone marrow mononuclear cells promotes functional endometrium reconstruction via downregulating ΔNp63 expression in Asherman’s syndrome. Sci China Life Sci 60, 404–416.
Acknowledgements
This work was supported by the National Natural Science Foundation of China (U1605225, 31570974, and 31470927), the Public Science and Technology Research Funds Projects of Ocean (201505029), the Promotion Program for Young and Middle-aged Teacher in Science and Technology Research of Huaqiao University (ZQN-PY107) and the Program for Innovative Research Team in Science and Technology in Fujian Province University.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Compliance and ethics The author(s) declare that they have no conflict of interest.
Electronic supplementary material
Supplementary material, approximately 15.1 MB.
Rights and permissions
About this article
Cite this article
Tang, H., Kankala, R.K., Wang, S. et al. Supercritical fluid-assisted controllable fabrication of open and highly interconnected porous scaffolds for bone tissue engineering. Sci. China Life Sci. 62, 1670–1682 (2019). https://doi.org/10.1007/s11427-018-9393-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11427-018-9393-8