To combine the advantages of the Mohr-Coulomb and the Duncan-Chang models, a new model called the nonlinear elastic-perfectly plastic model was established. In the numerical implementation of this model, a newly developed smoothing technique for yield and plastic potential surfaces was employed to accurately fit the side face of the hexagonal pyramid surface of the Mohr-Coulomb criterion. A user material subroutine was developed in Abaqus and was verified by modeling a conventional triaxial test of a soil specimen with the feature of a nonlinear elastic-perfectly plastic model. Finally, to further validate the applicability of this model and its subroutine, the 3D numerical simulation of a relatively complex deep excavation project was performed, and the results were compared with measured data, the results determined by the method recommended in the current code, and the results of the Mohr-Coulomb and Duncan-Chang models. The comparison demonstrates that the results of this new model were the closest to the measurements.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
W. T. Koiter, “Stress-strain relations, uniqueness and variational theorems for elastic-plastic materials with a singular yield surface,” Quart. Appl. Math., 11, 350-354(1953).
A. J. Abbo and S. W. Sloan, “A smooth hyperbolic approximation to the Mohr-Coulomb yield criterion,” Comput. Struct., 54(3), 427–441(1995).
A. J. Abbo, A. V. Lyamin, S. W. Sloan, and J. P. Hambleton, “A C2 continuous approximation to the Mohr–Coulomb yield surface,” Int. J. Solids Struct., 48(21), 3001-3010(2011).
S. P. Jia, W. Z. Chen, J. P. Yang, and P. S. Chen, “An elastoplastic constitutive model based on modified Mohr-Coulomb criterion and its numerical implementation (In Chinese),” Rock Soil Mech., 31(7), 2051-2508(2010).
J. M. Duncan and C. Y. Chang, “Nonlinear analysis of stress and strain in soils,” J. Soil Mech. Found. Division, 96(5), 1629-1653(1970).
L. J. Chen, Z. H. Dai, and Z. W. Liu. “Three-dimensional nonlinear finite element analysis of soft soil excavation engineering considering K0 consolidation (in Chinese),” Rock Soil Mech., 32(12), 3796-3804(2011).
R. B. Seed, and J. M. Duncan, “SSCOMP: A finite element analysis program for evaluation of soil-structure interaction and compaction effects,” Geotechnical Engineering Research Report No. UCB/GT-84-02, University of California, Berkeley, California. 1984.
P. H. Menetrey and K. J. William, “Triaxial failure criterion for concrete and its generalization,” ACI Struct. J., 92(3), 311-318(1995).
D. R. J. Owen and E. Hinton, Finite Elements in Plasticity: Theory and Practice, Pineridge Press Ltd., Swansea (1980).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 3, May-June, 2022.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Xu, X., Dai, ZH., Chen, LJ. et al. Nonlinear Elastic-Perfectly Plastic Model of Soil and its Numerical Implementation and Application. Soil Mech Found Eng 59, 215–223 (2022). https://doi.org/10.1007/s11204-022-09804-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11204-022-09804-9