To study the stressed state and limit equilibrium of a closed elastoplastic cylindrical shell containing a plane longitudinal internal crack of any configuration, we use an analog of the δc-model and represent the resolving system of equations of the problem in the complex form. The obtained system of equations is reduced to a system of nonlinear singular integral equations whose solution is constructed by the method of mechanical quadratures with regard for the conditions of plasticity of thin shells, the conditions of boundedness of stresses, and the conditions of uniqueness of displacements. We also perform the numerical analysis of the dependences of the crack opening displacements and the sizes of plastic zones on the boundary conditions imposed on the shell edges, on the configuration of the crack, and on the geometric and mechanical parameters.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Yu. P. Artyukhin, “Determination of stresses in an orthotropic cylindrical shell under the action of concentrated forces,” Issled. Teor. Plastin Oboloch., No. 5, 148–152 (1967).
Yu. P. Artyukhin, “Numerical analyses of one-layer and multilayer orthotropic shells for local loads,” Issled. Teor. Plastin Oboloch., No. 4, 91–110 (1966).
G. I. Barenblatt, “Mathematical theory of equilibrium cracks formed in brittle fracture,” Zh. Éksper. Teor. Fiz., 19, No. 4, 3–56 (1961).
L. T. Berezhnitskii, M. V. Delyavskii, and V. V. Panasyuk, Bending of Thin Plates with Cracklike Defects [in Russian], Naukova Dumka, Kiev (1979).
D. Broek, Elementary Engineering Fracture Mechanics, Noordhoff International Publishing, Leiden (1974); D. Broek, Elementary Engineering Fracture Mechanics, Springer (1982).
G. S. Vasil’chenko and P. F. Koshelev, Practical Application of Fracture Mechanics for the Evaluation of the Strength of Structures [in Russian], Nauka, Moscow (1974).
N. P. Vekua, Systems of Singular Integral Equations and Some Boundary-Value Problems [in Russian], Nauka, Moscow (1970).
V. Z. Vlasov, General Theory of Shells and Its Applications in Engineering [in Russian], Gostekhizdat, Moscow, Leningrad (1949).
G. K. Klein, Numerical Analysis of Underground Pipelines [in Russian], Stroiizdat, Moscow (1969).
I. S. Kostenko and O. V. Tumashova, “Approximate solution of the problem of elastic equilibrium of a finite cylindrical shell with surface cracks,” Vest. Kherson. Nats. Tekh. Univ., No. 2(4), 176–179 (2012).
R. M. Kushnir, M. M. Nykolyshyn, and V. A. Osadchuk, Elastic and Elastoplastic Limit States of Shells with Defects [in Ukrainian], Spolom, Lviv (2003).
A. P. Mukoed, “Novozhilov’s complex equations for orthotropic shells,” Prikl. Mekh., 1, No. 7, 122–126 (1965).
V. V. Novozhilov, Theory of Thin Shells [in Russian], Sudpromgiz, Leningrad (1962).
P. M. Ogibalov and M. A. Koltunov, Shells and Plates [in Russian], Moscow State University, Moscow (1969).
V. A. Osadchuk, M. M. Nikolishin, and V. I. Kir’yan, “Application of an analog of the δc-model for the determination of the opening displacement of a nonthrough crack in a closed cylindrical shell,” Fiz.-Khim. Mekh. Mater., 22, No. 1, 88–92 (1986).
V. A. Osadchuk and I. S. Yarmoshchuk, “Elastic equilibrium of a closed cylindrical shell with a system of periodically located parallel cracks,” in: Physicomechanical Fields in Deformable Media [in Russian], Naukova Dumka, Kiev (1978), pp. 51–58.
Ya. S Pidstryhach and S. Ya. Yarema, Thermal Stresses in Shells [in Ukrainian], Academy of Sciences of Ukrainian SSR, Kiev (1961).
K. F. Chernykh, Linear Theory of Shells [in Russian] Vols. 1–2, Leningrad State University, Leningrad (1962).
R. N. Shvets and V. D. Pavlenko, “On cyclically symmetric problems of heat conduction for plates and shells with holes in the presence of heat exchange,” Inzh.-Fiz. Zh., 23, No. 5, 890–897 (1972).
R. M. Kushnir, M. M. Nykolyshyn, and M. Yo. Rostun, “Limit equilibrium of inhomogeneous shells of revolution with internal cracks,” in: E. E. Gdoutos (editor), Proc. of the 14th Internat. Conf. on Fracture ICF14 (Rhodes, Greece, June 18–23, 2017), Vol. 1, Curran Associates, Inc., New York (2017), pp. 316–317; https://www.icfweb.org/Procf/ICF14/Vol1/316.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Matematychni Metody ta Fizyko-Mekhanichni Polya, Vol. 64, No. 4, pp. 82–91, October–December, 2021.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Kostenko, I.S., Nykolyshyn, T.M. & Rostun, M.Y. Solution of the Problem of Stressed State for a Closed Elastoplastic Cylindrical Shell Containing a Crack in the Complex Form. J Math Sci 279, 213–225 (2024). https://doi.org/10.1007/s10958-024-07006-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10958-024-07006-2