By using the methodology of the multiobjective optimal design of engineering systems, we consider the problem of weight-vibration Pareto optimization of a dual mass flywheel with an aim to study the feasibility of its application in heavy-duty truck powertrains. The results obtained show the following: the solution of the considered optimization problem does exist; the mass inertia, stiffness, and damping parameters of the absorber optimized in an operating engine speed range of 600–2000 rpm exist and provide the best attenuation of the torque oscillation at the transmission input shaft. Finally, the obtained results show the feasibility evidence for the application of weight-vibration optimized dual mass flywheels in heavy-duty truck drivetrain systems.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
V. Berbyuk, “Design optimization of torsional vibration absorbers for heavy-duty truck drivetrain systems,” Vibration, 2, No. 3, 240–264 (2019); https://doi.org/10.3390/vibration2030015.
V. Berbyuk, “Towards optimal design of engineering systems,” in: R. M. Kushnir and H. S. Kit (editors), Mathematical Problems of Mechanics of Nonhomogeneous Structures, Pidstryhach Institute for Applied Problems in Mechanics and Mathematics, National Academy of Sciences of Ukraine, Lviv, 5 (2019), pp. 278–279.
P. Mall, A. Fidlin, A. Krüger, and H. Groß, “Simulation based optimization of torsional vibration dampers in automotive powertrains,” Mech. Mach. Theor., 115, 244–266 (2017); https://doi.org/10.1016/j.mechmachtheory.2017.05.010.
S. M. Mousavi Bideleh and V. Berbyuk, A Computer Code for Sensitivity Analysis and Multiobjective Optimization: SAMO Tutorial, Research Report 2017:01, Department of Mechanics and Maritime Sciences, Chalmers University of Technology, Göteborg, Sweden (2017).
S. M. Mousavi Bideleh and V. Berbyuk, “Global sensitivity analysis of bogie dynamics with respect to suspension components,” Multibody Syst. Dynam., 37, No. 2, 145–174 (2016); https://doi.org/10.1007/s11044-015-9497-0.
S. M. Mousavi Bideleh and V. Berbyuk, “Multiobjective optimisation of bogie suspension to boost speed on curves,” Vehicle Syst. Dynam., 54, No. 1, 58–85 (2016); https://doi.org/10.1080/00423114.2015.1114655.
S. M. Mousavi Bideleh and V. Berbyuk, “Pareto optimization of a nonlinear tuned mass damper to control vibrations in hand held impact machines,” in G. Kerschen (editor), Nonlinear Dynamics, Proc. of the 36th IMAC, A Conference and Exposition on Structural Dynamics, Vol. 1 (2018), Springer, Cham (2019), pp. 27–44; https://doi.org/10.1007/978-3-319-74280-9_4.
L. Q. Song, L. P. Zeng, S. P. Zhang, J. D. Zhou, and H. E. Niu, “Design and analysis of a dual mass flywheel with continuously variable stiffness based on compensation principle,” Mech. Mach. Theory, 79, 124–140 (2014); https://doi.org/10.1016/j.mechmachtheory.2014.04.004.
L. Wramner, Dual Mass Flywheels in Truck Powertrains: Modelling, Simulations and Validation, Thesis for the Degree of Licentiate, Department of Mechanics and Maritime Sciences, Chalmers University of Technology, Göteborg, Sweden (2018).
L. Wramner, V. Berbyuk, and H. Johansson, “Vibration dynamics in non-linear dual mass flywheels for heavy-duty trucks,” in: Proc. of Internat. Conf. on Noise and Vibration Engineering (ISMA 2018), Leuven, Belgium (2018), pp. 1863–1876.
X. Zhang and M. D. Pandey, “An effective approximation for variance-based global sensitivity analysis,” Reliable Eng. Syst. Saf., 121, 164–174 (2014); https://doi.org/10.1016/j.ress.2013.07.010.
Author information
Authors and Affiliations
Corresponding author
Additional information
Published in Matematychni Metody ta Fizyko-Mekhanichni Polya, Vol. 62, No. 3, pp. 7–18, July–September, 2019.
Rights and permissions
About this article
Cite this article
Berbyuk, V. Weight-Vibration Pareto Optimization of a Dual Mass Flywheel. J Math Sci 263, 1–14 (2022). https://doi.org/10.1007/s10958-022-05917-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10958-022-05917-6