We perform the analytic investigation of the stress-strain state of a functionally graded cylindrical shell of finite length heated by a two-dimensional temperature field. The properties of the shell material are regarded as analytic functions of the thickness coordinate. In our investigations, we use the equations of the refined theory of shells that takes into account the deformation of transverse shear and the transverse normal deformation. The heat-conduction equation is deduced under the assumption of linear temperature distribution over the thickness of the shell. For the boundary conditions of simply supported shell, the quasistatic uncoupled problem of thermoelasticity is solved by the methods of Fourier and Laplace transforms. Numerical examples are presented and discussed to show that it is important to take into account the influence of inhomogeneity of the properties of materials of the metal–ceramics composites.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
U. V. Zhydyk, “Mathematical modeling of the thermomechanical behavior of inhomogeneous anisotropic shells,” Visn. Lviv. Univ., Ser. Mekh. Math., Issue 57, 72–75 (2000).
R. M. Kushnir, M. M. Nykolyshyn, U. V. Zhydyk, and V. M. Flyachok, “Modeling of thermoelastic processes in heterogeneous anisotropic shells with initial strains,” Mat. Metody Fiz.-Mekh. Polya, 53, No. 2, 122–136 (2010); English translation: J. Math. Sci., 178, No. 5, 512–530 (2011), 10.1007/s10958-011-0566-5.
R. M. Kushnir, T. M. Nykolyshyn, and M. I. Rostun, “Limiting equilibrium of a spherical shell nonuniform across the thickness and containing a surface crack,” Fiz.-Khim. Mekh. Mater., 43, No. 3, 5–11 (2007); English translation: Mater. Sci., 43, No. 3, 291–299 (2007), 10.1007/s11003-007-0034-z.
P. Ayoubi and A. Alibeigloo, “Three-dimensional transient analysis of FGM cylindrical shell subjected to thermal and mechanical loading,” J. Therm. Stresses, 40, No. 9, 1166–1183 (2017).
A. Bahtui and M. R. Eslami, “Coupled thermoelasticity of functionally graded cylindrical shells,” J. Mech. Res. Comm., 34, No. 1, 1–18 (2007).
M. Cinefra, E. Carrera, S. Brischetto, and S. Belouettar, “Thermo-mechanical analysis of functionally graded shells,” J. Therm. Stresses, 33, No. 10, 942–963 (2010).
S. A. Hosseini Kordkheili and R. Naghdabadi, “Thermoelastic analysis of functionally graded cylinders under axial loading,” J. Therm. Stresses, 31, No. 1, 1–17 (2008).
M. S. A. Houari, S. Benyoucer, I. Mechab, A. Tounsi, and E. A. A. Bedia, “Two-variable refined plate theory for thermoelastic bending analysis of functionally graded sandwich plates,” J. Therm. Stresses, 34, No. 4, 315–334 (2011).
P. Malekzadeh, Y. Heydarpour, M. R. Golbahar Haghighi, and M. Vaghefi, “Transient response of rotating laminated functionally graded cylindrical shells in thermal environment,” Int. J. Press. Vess. Piping, 98, 43–56 (2012).
N. Noda, “Thermal stresses in functionally graded materials,” J. Therm. Stresses, 22, No. 4-5, 477–512 (1999).
Y. Ootao and Y. Tanigawa, “Transient thermoelastic problem of a functionally graded cylindrical panel due to nonuniform heat supply,” J. Therm. Stresses, 30, No. 5, 441–457 (2007).
S. Pandey and S. Pradyumna, “Transient stress analysis of sandwich plate and shell panels with functionally graded material core under thermal shock,” J. Therm. Stresses, 41, No. 5, 543–567 (2018).
J. L. Pelletier and S. S. Vel, “An exact solution for the steady-state thermoelastic response of functionally graded orthotropic cylindrical shells,” Int. J. Solid Struct., 43, No. 5, 1131–1158 (2006).
D. Punera, T. Kant, and Y. M. Desai, “Thermoelastic analysis of laminated and functionally graded sandwich cylindrical shells with two refined higher order models,” J. Therm. Stresses, 41, No. 1, 54–79 (2018).
J. N. Reddy, Mechanics of Laminated Composite Plates and Shells. Theory and Analysis, CRC Press, New York (2004).
J. N. Reddy and C. D. Chin, “Thermomechanical analysis of functionally graded cylinders and plates,” J. Therm. Stresses, 21, No. 6, 593–626 (1998).
J. Sun, X. Xu, and C. W. Lim, “Buckling of functionally graded cylindrical shells under combined thermal and compressive loads,” J. Therm. Stresses, 37, No. 3, 340–362 (2014).
H. T. Thai and S. E. Kim, “A review of theories for the modeling and analysis of functionally graded plates and shells,” Compos. Struct., 128, 70–86 (2015).
J. H. Zhang, G. Z. Li, S. R. Li, and Y. B. Ma, “DQM-based thermal stresses analysis of a functionally graded cylindrical shell under thermal shock,” J. Therm. Stresses, 38, No. 9, 959–982 (2015).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Matematychni Metody ta Fizyko-Mekhanichni Polya, Vol. 61, No. 3, pp. 45–53, July–September, 2018.
Rights and permissions
About this article
Cite this article
Kushnir, R.М., Zhydyk, U.V. & Flyachok, V.М. Thermoelastic Analysis of Functionally Graded Cylindrical Shells. J Math Sci 254, 46–58 (2021). https://doi.org/10.1007/s10958-021-05287-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10958-021-05287-5