The problem of the stress–strain state of quadrangular complex-shaped plates is solved. The solutions of the boundary-value problem obtained with two numerical approaches are compared. One approach is based on discrete-continuous methods. In this approach, the system of governing equations is represented in new coordinates based on variations taking into account the plate geometry. Using spline-collocation, the two-dimensional boundary-value problem for the system of partial differential equations is reduced to one-dimensional one, which is solved by the numerical discrete-orthogonalization method. The other (discrete) approach is based on the finite-element method. The results for trapezoidal plates designed with both approaches are compared. The values of the displacements determined agree with high accuracy.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
S. K. Godunov, “Numerical solution of boundary-value problems for systems of linear ordinary differential equations,” Usp. Mat. Nauk, 16, No. 3, 171–174 (1961).
Ya. M. Grigorenko, A. T. Vasilenko, and G. P. Golub, Statics of Anisotropic Shells with Finite Shear Stiffness [in Russian], Naukova Dumka, Kyiv (1987).
O. C. Zienkiewicz, The Finite-Element Method in Engineering Science, McGraw-Hill, New York (1971).
M. S. Kornishin, V. N. Paimyshin, and V. F. Snegirev, Computational Geometry in Problems of Shell Mechanics [in Russian], Nauka, Moscow (1989).
R. S. Alwar and N. Ramachandra Rao, “Nonlinear analysis of orthotropic skew plates,” AIAA J., 11, No. 4, 495–498 (1973).
V. Birman, Plate Structures, Springer, New York (2011).
J. Blaauwendraad, Plates and FEM Surprises and Pitfalls, Springer, New York (2010).
D. N. Buragohain and S. C. Patodi, “Large deflection analysis of skew plates by lumped triangular element formulation,” Comput. Struct., 9, 183–189 (1978).
O. Civalek and M. Gurses, “Frequency analysis of trapezoidal plates and membrane using discrete singular convolution,” Asian J. Civil Eng. (Building and Housing), 9, No. 6, 593–605 (2009).
A. Ya. Grigorenko, S. A. Pankrat’ev, and S. N. Yaremchenko, “Solution of stress–strain problems for complex-shaped plates in a refined formulation,” Int. Appl. Mech., 53, No. 3, 326–333 (2017).
Ya. M. Grigorenko, A. Ya. Grigorenko, and G. G. Vlaikov, Problems of Mechanics for Anistropic Inhomogeneous Shells Based of Different Models, Akademperiodika, Kyiv (2009).
N. N. Kryukov, “Design of oblique and trapezoidal plates with the use of spline functions,” Int. Appl. Mech., 33, No. 5, 414–417 (1997).
W. Y. Li, Y. K. Cheung, F. Asce, and L.G. Tham, “Spline finite strip analysis of general plates,” J. Eng. Mech., 112, 43–54 (1986).
P. Malekzadeh and A. R. Fiouz, “Large deformation analysis of orthotropic skew plates with nonlinear rotationally restrained edges using DQM,” Compos. Struct., 80, No. 2, 196–206 (2007).
P. Malekzadeh and G. Karami, “Differential quadrature nonlinear analysis of skew composite plates based on FSDT,” Eng. Struct., 28, 1307–1318 (2006).
P. Mohajerani, “The thick orthotropic plates analysis method, Part 1: A review,” IOSR J. Mech. Civil Eng., 12, No. 2, Ver. III, 69–77 (2015).
V. N. Paimushin and S. V. Andreev, “Numerical study of the stress-strain state of one- and three-layer plates and shells of complex geometry,” Sov. Appl. Mech., 19, No. 7, 583–588 (1983).
A. R. Shahidi et al., “Nonlinear static analysis of arbitrary quadrilateral plates in very large deflections,” Communic. Nonlin. Sci. Numer. Simul., 12, 832–848 (2007).
I. Shufrin et al., “A semi-analytical approach for the geometrically nonlinear analysis of trapezoidal plates,” Int. J. Mech. Sci., 52, 1588–1596 (2010).
R. S. Srinivasan and S. V. Ramachandran, “Large deflection of clamped skew plates,” Comp. Meth. Appl. Mech. Eng., 7, 219–233 (1976).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 54, No. 6, pp. 94–101, November–December, 2018.
Rights and permissions
About this article
Cite this article
Grigorenko, A.Y., Pankrat’ev, S.A. & Yaremchenko, S.N. Analysis of the Stress–Strain State of Complex-Shaped Plates. Int Appl Mech 54, 695–701 (2018). https://doi.org/10.1007/s10778-018-0924-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-018-0924-9