Abstract
In India, where cereal-based meals make up the majority of the daily diet, bread wheat (Triticum aestivum L.) is a key grain crop. Micronutrient deficiencies are a result of the lack of a diverse food culture in the nation. Genotypes of bread wheat that have been biofortified might be introduced to address this. It is anticipated that more information on the genotype x year interaction of these nutrients in grain will help us better understand the size of this interaction and perhaps even identify more stable genotypes for this attribute. Year revealed divergent responses to grain iron and zinc. Compared to zinc, iron showed lowest variation across year. Maximum temperature was the major determinant for the four traits. Iron is also significant correlation with zinc. Among the total fifty-two genotype, HP-06, HP-22, HP-24, HP-25, HP-33, HP-44, and HP-45 were found superior for zinc and iron content. These genotypes with high levels of zinc and iron can be used in a hybridization programme to further crop improvement. Wide-scale cultivation of the chosen genotype with high zinc and iron content in the agro-climatic conditions of Jammu will work with the region's current cropping systems.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Micronutrient malnutrition, sometimes known as "hidden hunger," is a global problem that results in low birth weight, anaemia, learning difficulties, higher rates of morbidity and mortality, low job productivity, and high healthcare expenditures (Batra & Seth, 2002; Welch & Graham, 2002). Lack of iron (Fe) and zinc (Zn) affects a number of metabolic processes in humans, including oxygen transport, cell development and differentiation, DNA replication, protein synthesis, reduction of oxidative stress, and defence against brain cancers (Thavarajah et al., 2009). The importance of micronutrients in the formation of a well-functioning immune system is well established during the COVID-19 pandemic (WHO, 2020), and the efforts to increase Zn and Fe bioavailability through dietary supplementation, food fortification, and dietary diversification have been made to reduce micronutrient malnutrition, but the potential methods for reducing global micronutrient deficiency has been anticipated through the production of staple food crop cultivars fortified with micronutrients (Singh, 2017). The HarvestPlus programme of the CGIAR was conceptualized at mitigating the nutritional deficit targeting high-value crops across globe. Wheat being a major food crop grown across the world was focused for biofortification (HarvestPlus Brief, 2006), and project's major goal is to generate nutritionally enhanced cultivars of common wheat (Triticum aestivum L.) to increase people's intake of zinc (Zn) and iron (Fe), two micronutrients that are considered to be vital for human health (Pfeiffer & McClafferty, 2007). Advanced elite lines developed through this programme are being utilized by the location-specific breeding programmes in wheat. The genetic improvement towards biofortification necessitates the studies on genetic variability for Fe and Zn content in the seed, their inheritance in the plant, and their sinking into the progeny seed. The International Maize and Wheat Improvement Center (CIMMYT, International), with funding from the HarvestPlus Challenge Program and the CGIAR Research Program on Agriculture for Nutrition and Health, are in charge of a global initiative to create and spread to partners in South Asia high-yielding wheat varieties that contain high levels of grain Zn and Iron (Guzman et al. 2014). According to Singh et al. (2017) and Johnson et al. (2013), there is substantial genetic variation across wheat germplasm for a number of micronutrients, and genetic (G) x environmental (E) interactions play a key role in the inheritance of Fe and Zn content in wheat and other crops. Breeding cultivars with high Fe and Zn content in their seeds is complicated by environmental factors such soil fertility, soil type, seed characteristics, seed composition, and climate influences (Thavarajah et al., 2009). G × E interactions have been viewed as a barrier to crop development for nutritional features (Kumar et al., 2018) because it reduces trait heritability estimates, which may lead to less genetic gain through selection (Ceccarelli, 1989).
Thus, it is essential to study the impact of environment on Fe and Zn content in order to utilize them to make genetic improvement towards biofortification effective. With this background, preliminary investigation on the study was to determine the genetic variability for Fe and Zn content among exotic micronutrient enriched elite genotypes and adapted commercial varieties was undertaken and the impact of seasons/years with varying environment on the Fe and Zn content in the wheat, thus identifying stable genotypes for utilization in hybridization.
Material and methods
Experimental material for the present study comprised of forty-nine zinc and/or iron-enriched HarvestPlus genotypes and along with three adapted wheat varieties, viz. HD 3086, JAUW 683, and RSP 561 (Table 1).
These genotypes were evaluated during two consecutive Rabi seasons (November to April), viz. 2019–20 and 2020–21, in randomized complete block design with three replications having a plot size 1.0 m2. The description of experimental site along with weather conditions are presented in Table 2 and Fig. 1. All the agronomic and plant protection measures were followed as per the packages and practices of SKUAST-Jammu to raise healthy crop. Five plants per genotype per replication were randomly chosen for recording morpho-metric and yield attributing traits during both the crop seasons viz., plant height, number of tillers per plant, days to 50 per cent flowering, flag leaf area (cm2), spikelets per spike, days to maturity, 1000 grain weight (g), and grain yield per plant (g).
Micronutrients profiling for zinc and iron
A combination of tap water, diluted HCl (0.01 N), and distilled water was used to wash the grain samples. Samples were dried in a hot air oven at 60 °C for five minutes. Grain was processed and used for future chemical analysis after reaching consistent weight. Grain samples were microwave-digested with HNO3 by placing 0.5 g of the sample into a PTFE-TFM jar, adding 7 ml of suprapure HNO3, and predigesting the mixture overnight. The vessel was then sealed and placed in microwave digestion. The heating programme (Multiwave ECO, Anton Paar) was configured with operational parameters of a ramp period of 25 min to reach 180 to 190 °C and a hold time of 25 min at 180 to 190 °C (Datta et al., 2017). To ensure the full transfer of content, the samples were thoroughly shaken after being cooled to room temperature and added Milli-Q water. The resulting mixture was passed through a Whatman No. 42 filter before being diluted to a final amount of 100 ml in a volumetric flask using Milli-Q water that contained 1% suprapure HNO3. A atomic absorption spectrophotometer (AAS) was used to measure the total Zn and Fe in the digest. To prepare a reagent blank, a similar process was used but without a sample.
Statistical analysis
Pooled and year-wise analysis of variance (ANOVA) along with mean performance of genotypes during two consecutive years (2019–20 and 2020–21) were considered, and relationship among genotypes was assessed employing R ver. 4.1 and Windostat 9.3 software.
Results and discussion
Analysis of variance revealed mean sum of squares due to genotype to be highly significant for all traits during both years (Tables 3a and 4). The pooled ANOVA for genotype and year was found significant (p < 0.01) for all the traits, while interactions were found significant (p < 0.01) for only 1000-grain weight (g) and at p < 0.05 for grain yield per plant (Table 5). Table 6 summarizes the results on environmental variations for yield and yield contributing traits and micronutrient content (Zn and Fe) in fifty-two wheat genotypes grown under Jammu agro-climatic conditions. Significant genetic variation among genotypes is a prerequisite to increase the concentration of Zn and Fe content in wheat grain through conventional breeding.
Significant differences between treatments at the genotypic level may result from genetic variation of genotypes, whereas significant variations at the annual level and genotype x year interactions may result from changes in humidity, precipitation, climate, soil conditions, or other cultivation practises used throughout the cropping season (Joshi et al., 2010). The environment has a big impact on yield and the qualities that make up that yield. Table 6 summarises the mean data of the morpho-metric characteristics and micronutrients (Zn and Fe) content of 52 accessions for the two following years, 2019–2020 and 2020–2021.
It was prominently elucidated the significant variation among the genotype, year, and genotype x year interactions studied. The most stable plant height was recorded in the genotype RSP-561 (100 cm in 2019–20 and 99.67 cm in 2020–21) followed by HP-02 (93.33 cm in 2019–20 and 92.67 cm in 2020–21), HP-29 (87.00 cm in 2019–20 and 86.33 cm in 2020–21), and HP-39 (86.33 cm in 2019–20 and 87.00 cm in 2020–21), whereas the highest plant height was recorded for JAUW-683 (105 cm in 2020–21). For number of tillers per plant, the most superior and stable performance was attained by the genotype HP-02 (9.33 in 2019–2020 and 10.00 in 2020–21) and HP-48 (8.00 in 2019–2020 and 9.33 in 2020–21). Plant height and number of tillers per plant are the most sensitive to environmental fluctuations. It is indicated that the relative inconsistent performance of other genotypes was marked due to genotype and environment interaction. For days to 50 per cent of flowering, the genotype HP-04 (94.33 in 2019–2020 and 95.67 in 2020–21) and HD 3086 (94.00 in 2019–2020 and 96.00 in 2020–21) projected the lowest days to 50 per cent of flowering, which could be directly correlated with early maturity. While, the stable genotype was achieved by HP-03 (95.67) and HP-08 (97.33). Plant heights, flag leaf, days to 50 per cent of flowering, and seed morphological variation are the primary descriptor for characterization of germplasm. The leaf morphological traits of the wheat germplasm (9HPYT) under study showed a wide range of variability. Regarding the flag leaf, it was found that RSP-561 (30.23 cm) showed the most consistent trait during the two years investigated, followed by HP-22 (26.23 cm for 2019–20 and 26.57 cm for 2020–21), HP–09 (27.70 cm for 2019–20 and 28.23 cm for 2020–21), and HD 3086. (27.73 cm for 2019–20 and 28.37 cm for 2020–21). While in reference to spikelets per spike, the stable performance was presented by HP-39 (18.67) followed by HP-15 (18.00) and HP-03 (16.33), in case of days to maturity, genotype HP-14 (137.67) and lowest days to maturity was recorded in genotype, HP-04 (133.67 in 2019–20) and RSP-561 (133.67 in 2020–21). One thousand grain weight (g) and grain yield per plant (g) are the major economic traits and are important for successful agronomic practices and global demand. Thus, exploiting the highest 1000-grain weight (g) was observed for both the years in genotype HP-47 (46.40 g in 2019–20 and 43.63 g in 2020–21) followed by HP-21 (43.67 in 2019-20 g and 8.87 g in 2019–20), whereas for grain yield per plant (g), genotype HP-09 (24.40 g in 2020–21) followed by HP-02 (24.33 g in 2020–21) and HP-40 (23.30 g in 2020–21) was recorded highest. While, the most stable genotype for 1000-grain weight (g) was recorded in HP-06 (37.40) followed by HP-19 (42.33 gm in 2019–20 and 42.50 gm in 2020–21), HP-13 (39.00 gm in 2019–20 and 38.83 gm in 2020–21), and grain yield per plant (g), were revealed by genotype HP-08 (14.13) followed by HP-26 (14.37 gm), HP-27 (10.47 gm), and HP-28 (16.03) in 2019–20 and 2020–21, respectively. Highly significant differences among the genotype were observed for both grain Fe and Zn concentration, indicating the presence of sufficient amount of genetic variability for grain Fe and Zn concentration among the genotypes studied. The pooled mean percentage of Zn and Fe in grain of the fifty-two accessions ranged from 8.00 ppm to 40.67 ppm and 27.33 ppm to 41.67 ppm in Zn and from 9.67 ppm to 88.33 ppm and 28.67 ppm to 72.33 in Fe for 2019–20 and 2020–21, respectively (Fig. 2). The accession HP-45 (41.67 ppm in 2020–21) was recorded to establish the highest Zn content followed by accession HP-41 (40.67 ppm in 2019–20) and HP-02 (40.33 ppm in 2020–21), while the highest Fe content was depicted by HP-49 (88.33 ppm in 2019–20 and 72.33 ppm 2020–21) followed by HP-44 (71 ppm in 2019–20 68.67 ppm in 2019–20) and HP-45 (55.00 ppm in 2019–20 and 51.67 in 2020–21). Since, grain contains higher amounts of Zn and Fe, it is possible that harvesting plant will assist in the sustainable exploitation of natural conservation. As a result of polygenic control, environmental or nongenetic factors, and their interaction, few accessions, on the other hand, showed inconsistent Zn and Fe content over the course of two years (G × E interaction). When the performance of the traits was compared between the two years, it was evident that the accessions performed better in the first year for many morpho-metric and yield-attributing variables, including plant height, days to 50% of flowering, flag leaf, spikelets per plants, and Zinc (ppm) (2019–20). The accessions performed superior for number of tillers per plant, 1000-grain weight (g), and grain yield per plant (g) and iron (ppm) characters in the second consecutive year (2020–21). Overall based on the ten morpho-matric attributes, Zn and Fe content, the accessions HP-08, HP-26, HP-27, HP-28, HP-33, HP-41, and HP-49 displayed a comparable consistent performances pattern in the agro-climatic conditions of the North Western Himalayan region for the two consecutive years studied. HP-33, HP-41, HP-45, and HP-49 had higher Zn and Fe content.
Regarding qualities that contribute to yield, other genotypes behaved differently in both years. The findings showed that genotype-by-environment interactions complicate crop variety development and decrease the efficacy of breeding programmes aimed at improving yield (Ahmad et al., 2011). When the experimental materials for the current study were evaluated during the two years (2019–20 and 2020–21), different patterns of minimum and maximum temperature and rainfall were observed (Fig. 1). This gave researchers the chance to examine how genetic make-up and/or environmental factors affect the level of Fe and Zn (Kumar et al., 2018). The development of breeding techniques for creating biofortified wheat cultivars is aided by knowledge of the interplay between genotype and environment. Given that genotype x year interactions were significant in the current study for both Fe and Zn content, it is likely that a sizeable amount of the Fe and Zn content in wheat seed depends on soil conditions, crop management techniques, temperature, precipitation, and these factors (moisture, aeration, and soil pH). In contrast, substantial genotype x location interactions for Zn and Fe concentrations in both wild and cultivated cultivars of wheat were found (Gomez-Becerra et al., 2010; Ortiz-Monasterio et al., 2007; Trethowan, 2007). Year-to-year changes in Fe and Zn content were likewise extremely significant in the current investigation, showing that the environmental conditions depicted in Fig. 1 are present. Fifty-two genotypes were divided into eight clusters based on the K-means cluster. The distribution pattern of genotypes in the different cluster is presented in Fig. 3. The cluster VI was the largest cluster consisting of 15 genotypes followed by cluster I (10 genotypes), cluster III having 8 genotype, cluster VII having 7 genotypes, cluster IV (6 genotypes), cluster VIII (3 genotypes), cluster V (2 genotype), and cluster II having 1 genotype. It is pertinent to mention that all the zinc- and iron-enrich genotypes were obtained from the HarvestPlus breeding programme and likely to have some part of common ancestry and thus fall in the same cluster. Similar results have been reported by Ajmal et al. (2013); Shahryari et al. (2011). The clustering of genotypes from different ecogeographic regions into one cluster could be due to the exchange of breeding material among global partners. Dendrogram was achieved from cluster analysis of fifty-two genotypes on the basis of two micronutrient (Zn and Fe) content (Fig. 4). According to this grouping under-study wheat genotypes divided into seven clusters. Cluster II and VI was considered most desirable cluster for selecting the genotype for use in hybridization.
It is possible to simultaneously increase the concentration of zinc and iron in grains by selection because the genotypic and phenotypic correlations between zinc and iron were highly positive (Table 7). By Velu et al. (2012) and Chatrath et al. (2018), similar associations between grain iron and zinc concentration were reported. The genotypic connection between the iron and days to maturity was highly positive, and Velu et al. (2012) observed a similar finding. Similar results were found by Velu et al. (2012) and the zinc yield had a significantly favourable phenotypic connection with days to maturity. Spikelets per spike and grain weight revealed a substantial positive genotypic connection with grain yield (Table 7). According to Joshi et al. (2007), the number of effective tiller and grains per spike are the most important traits for grain yield in wheat. From this research, genotypic correlation between grain yield with days to 50 per cent flowering and flag leaf area was found significant negative (− 0.158**) and (− 0.170*), respectively.
Conclusion
Wide adaptation and consistent performance in a range of circumstances are admirable objectives for resource conservation. In order to have more success, scientists have concentrated on the phenomenon of genotype environment (G × E) interaction, which enables them to distinguish between genotype performance in various environments and to selectively target suitable genotypes for commercial cultivation to specific environmental niches. Using 10 morpho-nutrient (Zn and Fe content) properties, it was determined that HP-03, HP-06, HP-08, and HP-27 were the consistently performing biofortified wheat accessions. These genotypes might be used for hybridization under the Jammu agro-climatic of the Northwestern Himalayan region, and HP-06, HP-22, HP-33, HP-34, HP-41, HP-44, HP-45 and HP-49, which have high Zn and Fe concentration. This study showed that environment and its interaction with genotypes have significant and higher effects than the effects due to the genotypes per se on the grain Zn and Fe concentration in wheat. It is, therefore, concluded that improvement of grain Zn and Fe concentration is possible but potentially slow due to the substantial influence by the environment.
References
Ahmad, B., Lal, H. A., Shahid, R. M., Asif, M., Muhammad, I., & Ramatullah, Q. (2011). Grain yield stability in chickpea (Cicer arietinum L) Across environments. Pakistan Journal of Botany, 43(5), 2947–2951.
Ajmal, S. U., Minhas, N. M., Hamdani, A., Shakir, A., Zubair, M., & Ahmad, Z. (2013). Multivariate analysis of genetic divergence in wheat (Triticum aestivum) germplasm. Pakistan Journal of Botany, 45(5), 1643–2164.
Batra, J., & Seth, P. K. (2002). Effect of iron deficiency on developing rat brain. Indian Journal of Clinical Biochemistry, 17, 108–114.
Ceccarelli, S. (1989). Wide adaptation: How wide? Euphytica, 40, 197–205.
Chatrath, R., Gupta, V., Satisg, K., Prakash, O., & Singh, G. P. (2018). Evaluation of biofortified spring wheat genotypes for yield and micronutrients. Journal of Applied and Natural Science, 10(1), 210–215.
Datta SP, Meena MC, Dwivedi BS and Shukla AK (2017). Manual on advanced techniques for analysis of nutrients and pollutant elements in soil, plant and human. Westville Publishing House, New Delhi. pp 148 (ISBN 978–93–83491–87–2).
Gomez-Becerra, H. F., Yazici, A., Ozturk, L., Budak, H., Peleg, Z., Morgounov, A., Fahima, T., Saranga, Y., & Cakmak, I. (2010). Genetic variation and environmental stability of grain mineral nutrient concentrations in Triticum dicoccoides under five environments. Euphytica, 171, 39–45.
Guzmán, C., Medina-Larqué, A. S., Velu, G., González-Santoyo, H., Singh, R. P., Huerta-Espino, J., & Peña, R. J. (2014). Use of wheat genetic resources to develop biofortified wheat with enhanced grain zinc and iron concentrations and desirable processing quality. Journal of Cereal Science, 60(3), 617–622.
Harvest Plus Brief. (2006). Breeding Crops for Better Nutrition. DC, USA.
Johnson, C., Thavarajah, D., & Thavarajah, P. (2013). The influence of phenolic and phytic acid food matrix factors on iron bioavailability potential in 10 commercial lentil genotypes (Lens culinaris L.). Journal of Food Composition and Analysis, 31, 82–86.
Joshi, A. K., Crossa, J., Arun, B., Chand, R., Trethowan, R., Vargas, M., & Ortiz-Monasterio, I. (2010). Genotype environment interaction for zinc and iron concentration of wheat grain in eastern Gangetic plains of India. Field Crops Research, 116, 268–277.
Joshi, A. K., Ortiz-Ferrara, G., Crossa, J., Singh, G., Alvarado, G., Bhatta, M. R., Duveiller, E., Sharma, R. C., Pandit, D. B., Siddique, A. B., Das, S. Y., Sharma, R. N., & Chand, R. (2007). Associations of environments in South Asia based on spot blotch disease of wheat caused by Cochliobolus sativus. Crop Science, 47, 1071–1081.
Kumar, J., Thavarajah, D., Kumar, S., Sarker, A., & Singh, N. P. (2018). Analysis of genetic variability and genotype x environment interactions for iron and zinc content among diverse genotypes of lentil. Journal of Food Science and Technology, 55(9), 3592–3605.
Ortiz-Monasterio, I., Palacios-Rojas, N., Meng, E., Pixley, K., Trethowan, R., & Pena, R. J. (2007). Enhancing the mineral and vitamin content of wheat and maize through plant breeding. Journal of Cereal Science, 46, 293–307.
Pfeiffer, W. H., & McClafferty, B. (2007). Harvest Plus: breeding crops for better nutrition. Crop Science, 47, 88–105.
Shahryari, R., Mahfoozi, B., Mollasadeghi, V., & Khayatnezhad, M. (2011). Genetic diversity in bread wheat for phonological and morphological traits underterminal drought stress condition. Advances in Environmental Biology, 5(1), 169–173.
Singh, N. (2017). Pulses: An overview. Journal of Food Science and Technology, 54(4), 853–857.
Thavarajah, D., Thavarajah, P., Sarker, A., & Vandenberg, A. (2009). Lentils (Lens culinaris Medikus subspecies culinaris): A whole food for increased iron and zinc intake. Journal of Agricultural and Food Chemistry, 57, 5413–5419.
Trethowan RM (2007). Breeding wheat for high iron and zinc at CIMMYT: state of the art, challenges and future prospects. In: Proceeding of the 7th international wheat conference, Mar del Plata, Argentina
Velu, G., Singh, P., Huerta, J., Pena Bautista, J., Arun, B., Mahendru, S. A., Yaqub, M. M., SohuV, S., Mavi, G. S., Crossa, J., Alvarado, G., Joshi, A. K., & Pfeiffer, W. H. (2012). Performance of bio-fortified spring wheat genotypes in target environments for grain zinc and iron concentrations. Field Crops Research, 137, 261–267.
Welch, M. R., & Graham, D. R. (2002). Breeding crops for enhanced micronutrient content. Plant and Soil, 245, 205–214.
WHO (2020). New electronic survey manual supports countries to combat micronutrient defciencies. https://www.who.int/publicatio ns/i/item/9789240012691. Accessed 18 July 2021
Acknowledgements
This work was financially supported by the Division of Plant Breeding and Genetics, Sher-e-Kashmir University of Agricultural Sciences and Technology of Jammu, Main Campus, Chatha Jammu (J&K).
Author information
Authors and Affiliations
Contributions
TD and AS designed the study; AS and NA wrote the first draft; TS and ZD participated in the data collection; BK and MKP elaborated and analysed the data and critically revised the manuscript.
Corresponding author
Ethics declarations
Conflict of interests
The authors declare no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Sheera, A., Dey, T., Aftab, N. et al. Morpho-nutritional status of micronutrient efficient wheat (Triticum aestivum L.) genotypes under changing environments. Environ Geochem Health 45, 8953–8966 (2023). https://doi.org/10.1007/s10653-023-01610-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10653-023-01610-y