Abstract
The present work describes a fully implicit simulator for polymer injection implemented in the free, open-source MATLAB Reservoir Simulation Toolbox (MRST). Polymer injection is one of the widely used enhanced oil recovery (EOR) techniques, and complicated physical process is involved, which makes accurate simulation very challenging. The proposed work is intended for providing a powerful and flexible tool to investigate the polymer injection process in realistic reservoir scenarios. Within the model, the polymer component is assumed to be only transported in the water phase and adsorbed in the rock. The hydrocarbon phases are not influenced by the polymer, and they are described with the standard, three-phase, black-oil equations. The effects of the polymer are simulated based on the Todd–Longstaff mixing model, accounting for adsorption, inaccessible pore space, and permeability reduction effects. Shear-thinning/thickening effects based on shear rate are also included by the means of a separate inner-Newton iteration process within the global nonlinear iteration. The implementation is based on the automatic differentiation framework in MRST (MRST-AD), and an iterative linear solver with a constrained pressure residual (CPR) preconditioner is used to solve the resulting linear systems efficiently. We discuss certain implementation details to show how convenient it is to use the existing functionality in MRST to develop an accurate and efficient polymer flooding simulator for real fields. With its modular design, vectorized implementation, support for stratigraphic and general unstructured grids, and automatic differentiation framework, MRST is a very powerful prototyping and experimentation platform for development of new reservoir simulators. To verify the simulator, we first compare it with a commercial simulator and good agreement is achieved. Then, we apply the new simulator to a few realistic reservoir models to investigate the effect of adding polymer injection, and computational efficiency is demonstrated. Finally, we combine existing optimization functionality in MRST with the new polymer simulator to optimize polymer flooding for two different reservoir models. We argue that the presented software framework can be used as an efficient prototyping tool to evaluate new models for polymer–water flooding processes in real reservoir fields.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Berge, R.L.: Unstructured PEBI grids adapting to geological features in subsurface reservoirs. Master’s thesis, Norwegian University of Science and Technology (2016)
Gries, S., Stüben, K., Brown, G.L., Chen, D., Collins, D.A.: Preconditioning for efficiently applying algebraic multigrid in fully implicit reservoir simulations. SPE J. 19(04), 726–736 (2014). doi:10.2118/163608-PA
Hilden, S.T., Møyner, O., Lie, K.A., Bao, K.: Multiscale simulation of polymer flooding with shear effects. Transp. Porous Media 113(1), 111–135 (2016). doi:10.1007/s11242-016-0682-2
Jansen, J.D.: Adjoint-based optimization of multi-phase flow through porous media—a review. Comput. Fluids 46(1, SI), 40–51 (2011). doi:10.1016/j.compfluid.2010.09.039
Klemetsdal, Ø.S., Berge, R.L., Lie, K.A., Nilsen, H.M., Møyner, O.: Unstructured gridding and consistent discretizations for reservoirs with faults and complex wells SPE Reservoir Simulation Conference, Montgomery, Texas, USA, 20-22 February 2017. doi:10.2118/182679-MS (2017)
Krogstad, S., Lie, K.A., Møyner, O., Nilsen, H.M., Raynaud, X., Skaflestad, B.: MRST-AD—an open-source framework for rapid prototyping and evaluation of reservoir simulation problems SPE reservoir simulation symposium. Society of Petroleum Engineers. doi:10.2118/173317-MS (2015)
Lake, L.W.: Enhanced Oil Recovery. Prentice-Hall (1989)
Li, W., Dong, Z., Sun, J., Schechter, D.S.: Polymer-alternating-gas simulation: a case study SPE EOR Conference at Oil and Gas West Asia. Society of Petroleum Engineers. doi:10.2118/169734-MS (2014)
Li, Z., Delshad, M.: Development of an analytical injectivity model for non-Newtonian polymer solutions SPE Reservoir Simulation Symposium, 18-20 February, The Woodlands, Texas, USA. doi:10.2118/163672-MS. SPE-163672-MS (2013)
Lie, K.A.: An introduction to reservoir simulation using MATLAB: user guide for the Matlab Reservoir Simulation Toolbox (MRST). SINTEF ICT. http://www.sintef.no/Projectweb/MRST/publications (2016)
Lie, K.A., Krogstad, S., Ligaarden, I.S., Natvig, J.R., Nilsen, H.M., Skaflestad, B.: Open-source MATLAB implementation of consistent discretisations on complex grids. Comput. Geosci. 16(2), 297–322 (2012). doi:10.1007/s10596-011-9244-4
Lie, K.A., Møyner, O., Krogstad, S.: Application of flow diagnostics and multiscale methods for reservoir management SPE Reservoir Simulation Symposium. Society of Petroleum Engineers. doi:10.2118/173306-MS (2015)
Littmann, W.: Polymer flooding. Elsevier (1988)
Luo, H.S., Delshad, M., Li, Z.T., Shahmoradi, A.: Numerical simulation of the impact of polymer rheology on polymer injectivity using a multilevel local grid refinement method. Petrol. Sci. pp. 1–16. doi:10.1007/s12182-015-0066-1 (2015)
Møyner, O., Krogstad, S., Lie, K.A.: The application of flow diagnostics for reservoir management. SPE J. 20(02), 306–323 (2015). doi:10.2118/171557-PA
MRST: The MATLAB Reservoir Simulation Toolbox. http://www.sintef.no/MRST/ (2016b)
Neidinger, R.D.: Introduction to automatic differentiation and MATLAB object-oriented programming. SIAM Rev. 52(3), 545–563 (2010). doi:10.1137/080743627
Nocedal, J., Wright, S.: Numerical optimization. Springer Science & Business Media (2006)
Notay, Y.: An aggregation-based algebraic multigrid method. Electron. Trans. Numer. Anal. 37, 123–140 (2010)
Open Porous Media initiative: Open datasets (2015). www.opm-project.org
Peaceman, D.W.: Interpretation of well-block pressures in numerical reservoir simulation. Soc. Petrol. Eng. J. 18(3), 183—194 (1978). doi:10.2118/6893-PA
Schlumberger: Eclipse technical description. Version 2013, 2 (2013)
Sheng, J.J., Leonhardt, B., Azri, N.: Status of polymer-flooding technology. J. Canadian Petrol. Tech. 54(02), 116–126 (2015). doi:10.2118/174541-PA
Sorbie, K.S.: Polymer-improved oil recovery. Springer Science & Business Media (1991)
Todd, M.R., Longstaff, W.J.: The development, testing, and application of a numerical simulator for predicting miscible flood performance. J. Petrol. Tech. 24(07), 874–882 (1972). doi:10.2118/3484-PA
Wolfe, P.: Convergence conditions for ascent methods. SIAM Rev. 11(2), 226–235 (1969). doi:10.1137/1011036
Acknowledgments
The work has been funded in part by the Research Council of Norway under grant no. 244361. The authors want to thank Statoil (operator of the Norne field) and its license partners ENI and Petoro for the release of the Norne data. Further, the authors acknowledge the IO Center at NTNU for coordination of the Norne cases and Statoil for releasing the simulation model under an open data license as part of the Open Porous Media (OPM) initiative. We also appreciate helpful discussions and suggestions from Stein Krogstad (SINTEF) regarding the polymer optimization examples.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bao, K., Lie, KA., Møyner, O. et al. Fully implicit simulation of polymer flooding with MRST. Comput Geosci 21, 1219–1244 (2017). https://doi.org/10.1007/s10596-017-9624-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10596-017-9624-5