Abstract
Flexible wings of insects and bio-inspired micro air vehicles generally deform remarkably during flapping flight owing to aerodynamic and inertial forces, which is of highly nonlinear fluid-structure interaction (FSI) problems. To elucidate the novel mechanisms associated with flexible wing aerodynamics in the low Reynolds number regime, we have built up a FSI model of a hawkmoth wing undergoing revolving and made an investigation on the effects of flexible wing deformation on aerodynamic performance of the revolving wing model. To take into account the characteristics of flapping wing kinematics we designed a kinematic model for the revolving wing in two-fold: acceleration and steady rotation, which are based on hovering wing kinematics of hawkmoth, Manduca sexta. Our results show that both aerodynamic and inertial forces demonstrate a pronounced increase during acceleration phase, which results in a significant wing deformation. While the aerodynamic force turns to reduce after the wing acceleration terminates due to the burst and detachment of leading-edge vortices (LEVs), the dynamic wing deformation seem to delay the burst of LEVs and hence to augment the aerodynamic force during and even after the acceleration. During the phase of steady rotation, the flexible wing model generates more vertical force at higher angles of attack (40°–60°) but less horizontal force than those of a rigid wing model. This is because the wing twist in spanwise owing to aerodynamic forces results in a reduction in the effective angle of attack at wing tip, which leads to enhancing the aerodynamics performance by increasing the vertical force while reducing the horizontal force. Moreover, our results point out the importance of the fluid-structure interaction in evaluating flexible wing aerodynamics: the wing deformation does play a significant role in enhancing the aerodynamic performances but works differently during acceleration and steady rotation, which is mainly induced by inertial force in acceleration but by aerodynamic forces in steady rotation.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Du, G., Sun, M.: Effects of wing deformation on aerodynamic forces in hovering hoverflies. J. Exp. Biol. 213, 2273–2283 (2010)
Mountcastle, A.M., Combes, S.A.: Wing flexibility enhances load-lifting capacity in bumblebees. Proc. R. Soc. B 280, 20130531 (2013)
Nakata, T., Liu, H.: Aerodynamic performance of a hovering hawkmoth with flexible wings: A computational approach. Proc. R. Soc. B 279, 722–731 (2012)
Tanaka, H., Whitney, J.P., Wood, R.J.: Effect of flexural and torsional wing flexibility on lift generation in hoverfly flight. Integr. Comp. Biol. 51, 142–150 (2011)
Young, J., Walker, S.M., Bomphrey, R.J., et al.: Details of insect wing design and deformation enhance aerodynamic function and flight efficiency. Science 325, 1549–1552 (2009)
Zheng, L., Hedrick, T.L., Mittal, R.: Time-varying wing-twist improves aerodynamic efficiency of forward flight in butter-flies. PLoS ONE 8, e53060 (2013)
Usherwood, J.R., Ellington, C.P.: The aerodynamics of revolving wings. I. Model hawkmoth wings. J. Exp. Biol. 205, 1547–1564 (2002)
Usherwood, J.R., Ellington, C.P.: The aerodynamics of revolving wings. II. Propeller force coefficient from mayfly to quail. J. Exp. Biol. 205, 1565–1576 (2002)
Lentink, D., Dickinson, M.H.: Rotational accelerations stabilize leading edge vortices on revolving fly wings. J. Exp. Biol. 212, 2705–2719 (2009)
Dickinson, M.H., Lehmann, F.O., Sane, S.P.: Wing rotation and the aerodynamic basis of insect flight. Science 284, 1954–1960 (1999)
Harbig, R.R., Sheridan, J., Thompson, M.C.: Reynolds number and aspect ratio effects on the leading-edge vortex for rotating insect wing planforms. J. Fluid Mech. 717, 166–192 (2013)
Harbig, R.R., Sheridan, J., Thompson, M.C.: Relationship between aerodynamic forces, flow structures and wing camber for rotating insect wing planforms. J. Fluid Mech. 730, 52–75 (2013)
Zheng, L., Hedrick, T., Mittal, R.: A comparative study of the hovering efficiency of flapping and revolving wings. Bioinspir. Biomim. 8, 036001 (2013)
Aono, H., Liu, H.: Vortical structure and aerodynamics of hawkmoth hovering. J. Biomech. Sci. Eng. 1, 234–245 (2006)
Combes, S.A., Daniel, T.L.: Into thin air: contributions of aerodynamic and inertial-elastic forces to wing bending in the hawkmoth Manduca sexta. J. Exp. Bio. 206, 2999–3006 (2003)
Willmott, A. P., Ellington, C.P.: The mechanism of flight in the hawkmoth Manduca sexta. I. Kinematics of hovering and forward flight. J. Exp. Bio. 200, 2705–2722 (1997)
Nakata, T., Liu, H.: A fluid-structure interaction model of insect flight with flexible wings. J. Comput. Phys. 231, 1822–1847 (2012)
Liu, H., Kawachi, K.: A numerical study of insect flight. J. Comput. Phys. 146, 124–156 (1998)
Liu, H.: Integrated modeling of insect flight: From morphology, kinematics to aerodynamics. J. Comput. Phys. 228, 439–459 (2009)
Ellington, C.P.: The aerodynamics of hovering insect flight. II. Morphological parameters. Phil. Trans. R. Soc. Lond. B 305, 17–40 (1984)
Ertas, A., Krafcik, J.T., Ekwaro-Osire, S.: Performance of an anisotropic Allman/DKT 3-node thin triangular flat shell element. Compos. Eng. 2, 269–280 (1992)
Bathe, K.J., Ramm, E., Wilson, E.L.: Finite element formulation for large deformation dynamic analysis. Int. J. Numer. Meth. Eng. 9, 353–386 (1975)
Mohan, P., Kapania, R.K.: Updated Lagrangian formulation of a flat triangular element for thin laminated shells. AIAA J. 36, 273–281 (1998)
Liu, H., Ellington, C.P., Kawachi, K., et al.: A computational fluid dynamic study of hawkmoth hovering. J. Exp. Biol. 201, 461–477 (1998).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Noda, R., Nakata, T. & Liu, H. Effects of wing deformation on aerodynamic performance of a revolving insect wing. Acta Mech Sin 30, 819–827 (2014). https://doi.org/10.1007/s10409-014-0095-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10409-014-0095-9