Abstract
Triangular fuzzy numbers (TFNs) are widely used for selection problems to determine expert opinions using linguistic expressions. Some aggregation procedures are developed to determine expert opinions more accurately. However, there is a need for a simple and more useful procedure to solve the selection problems more suitably. For this purpose, our study offers a triangular, exparabolic, and parabolic area calculation-based approximation approach for TFNs to aggregate the possible hedges (very and more or less) for TFNs. Hence, this aggregation procedure provides a tuning opportunity for classical TFN expressions to capture possible tuning processes to reflect the hesitancies of experts. The technique for order preferences by similarity to ideal solution (TOPSIS) method is applied in the two studies from extant literature, and suitable alternatives are determined as a result of the ranking process. Finally, a comparative analysis is presented to illustrate the efficiency of the proposed procedure. The conventional TOPSIS model’s ranking scores are very close for exemplified examples (i.e., 0.5308, 0.4510, 0.4550 and 0.5304, 0.4626, 0.4940), but the proposed model’s result has fluctuated for the same examples (i.e., 0.346, 0,669, 0,567 and 0.208, 0.991, 0.148). So, the main advantage of the proposed aggregation procedure is the alternative ranking scores separation capability analyzed with their linguistic diversification.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
1 Introduction
Nowadays, selection problems are becoming a more important problem type in multi-criteria decision-making (MCDM) environments due to the sharp competition in the different sectors. Selection problems are widely used in many areas, such as machine-tool selection, robot selection, manufacturing process selection, supplier selection, personnel selection, material selection, etc. Developments of new technologies impact the products and human capabilities to complete tasks more rapidly and efficiently. So, alternative capabilities are rapidly growing, and rating alternatives is a complex issue in the MCDM-based selection problems. We must assign criteria weights and determine alternatives’ ratings to set MCDM-based selection models. In these stages, expert opinions are very crucial to select the most appropriate alternative. In the criteria weight assignment and alternative ranking process, linguistic expressions of experts are very critical to assigning more accurate criteria weights and alternative rating scores.
The fuzzy set theory-based applications are incorporated into the MCDM models to cope with this complex issue. In the literature, TFN-based aggregation methods are widely used to assign experts’ linguistic expressions. For example, Memari et al. [18] proposed an intuitionistic fuzzy TOPSIS model to select the right sustainable supplier for automotive spare parts producer firms. Their presented model determined sustainable ranking scores of suppliers through a case study. Rahimdel and Karamoozian [21] used the technique for order preferences by similarity to the ideal solution (TOPSIS) model with fuzzy set theory to select the best primary crusher for the iron mine. Chu and Lin [8] presented a fuzzy TOPSIS approach to robot selection problems using TFN-based linguistic expressions. The membership function of each weight was determined by interval procedure for TFNs. Li et al. [14] presented an indicator system and a method for data integration by evaluating the specifications and role of third-party logistics, for 3PL provider selection. They established a comprehensive analysis approach for 3PL suppliers based on fuzzy sets. Lam et al. [13] proposed a fuzzy principal component analysis approach for solving the material supplier selection problem. They used TFNs to quantify the experts’ expressions. Then, they employed principal component analysis to compress the criteria data and eliminate the multi-collinearity among them. Li et al. [15] developed a fuzzy portfolio selection model with background risk based on the definitions of the possibilistic return and possibilistic risk. They used LR-type possibility distribution for the returns of assets. Amindoust et al. [1] determined the sustainable supplier selection criteria and sub-criteria and presented an approach to rank suppliers. They used the fuzzy inference system-based ranking model to handle the subjectivity of experts’ expressions for the selection problem. Liu [16] integrated fuzzy quality function deployment and the prototype product selection model to develop a product design and selection. They adopted the α-cut operation in the fuzzy quality function deployment model to determine the fuzzy set of each alternative. Keršulienė and Turskis [11] proposed a fuzzy MCDM model using the fuzzy information fusion principles, additive ratio assessment, and step-wise weight assessment ratio analysis models to select an architect. Their aggregation process was based on the unification of information using fuzzy sets on a basic linguistic term set. Mougouei and Powers [19] proposed a cost–value approach that considers the impacts of value-related requirement dependencies on the value of selected optimal requirements. They exploited the algebraic structure of fuzzy graphs for modeling value-related requirement dependencies and their strengths. Chan and Prakash [5] proposed a maintenance policy selection model at the level of the firm rather than the equipment level. Some selection criteria were crisp values, whereas others were obtained in linguistic terms. They presented a distance-based fuzzy MCDM model to select the appropriate maintenance policy. Their MCDM model was suitable for integrating data, in the form of linguistic variables, TFNs, and crisp numbers, into the analyzing study of maintenance policy alternatives. Chen and Lin [7] proposed a fuzzy geometric mean decomposition-based fuzzy MCDM method to enhance the flexibility of the fuzzy decision matrix. They used fuzzy sub-judgment matrices to diversify the original fuzzy judgment matrix. Their presented approach was used to select the smart technology applicant for supporting mobile health care during and after the COVID-19 pandemic. Chai et al. [4] developed a fuzzy MCDM model based on the cumulative prospect theory, interval-valued fuzzy sets, and a combination of intuitionistic fuzzy sets for supplier selection problems. Huang et al. [9] introduced the patent value evaluation model. They considered the fuzziness of decision makers’ expressions and the uncertainty of patent indicators and proposed a TFN-TOPSIS model based on the possibility degree relationship model. Chisale and Lee [3] prioritized barriers to renewable energy acceleration in Malawi using the analytic hierarchy process (AHP) and fuzzy TOPSIS combined model. They used TFNs to represent the expert’s subjective judgments. Zhang et al. [26] used the fuzzy-TOPSIS model to obtain the hexagonal close-packed metallic crystal best structure among all structure alternatives when investigated under more than one criterion evaluating the TFNs.
We can see from the literature that the aggregation procedures in the selection problems using MCDM models depend on the linguistic expressions of the expert opinions. The fuzzy extensions of the TOPSIS model are developed in the literature to overcome model uncertainty since human judgments in real-life studies. They used aggregation procedures to aggregate different expert opinions in a useful way. However, the presented procedures have some disadvantages. They used fuzzy number characteristics-based aggregation procedures and ignored the prefixed membership function extensions or modifiers that were “very” and “more or less”. In this work, we described an exparabolic and parabolic shape area calculation based on the TFN linguistic expression aggregating procedure for fuzzy TOPSIS models to fill this gap. Furthermore, this procedure provides the best alternative using extended linguistic hedges for the linguistic expressions, hence maintaining the descriptive capabilities of the fuzzy TFNs. The proposed aggregating procedure is very simple, reflects the classical TFN values in more extendable judgments, and provides a more tolerable way. Also, the provided aggregation procedure is capable of differentiating ranking results of alternatives that have more adjacent scores among them in the classical TFNs-based fuzzy TOPSIS models.
2 Methodology
2.1 Fuzzy TFN
In this study, triangular fuzzy numbers are used for linguistic expressions (see Fig. 1) [6, 22]. The fuzzy numbers are defined using the membership function (µ(x)) ranging from 0 to 1. A TFN is illustrated in Fig. 1, represented by (l, m, u), where l, m, and u are the smallest, medium, and largest possible values, respectively. The linear TFN can be defined with a membership function as follows:
Fuzzy arithmetic for TFNs are as follows:
(i) TFN operations [6]:
Let \(\mathop A\limits^{\sim } =\) (l1, m1, u1), and \(\mathop B\limits^{\sim } =\) (l2, m2, u2) are positive TFN numbers, the arithmetic operations are as follows:
2.2 The new exparabolic and parabolic area calculation-based aggregation approach for TFNs
Reflecting the optimal meaning and appropriate system behavior for a given linguistic expression is difficult, even for problem-trained experts. This is a decisive factor in multi-criteria decision-making processes. The semantic representation of linguistic expressions creates a numerical value about the relevance of the concept that the expression represents. The well-known prefixed membership function modifiers are “very” and “more or less”. The first modifier causes a decrease in the membership degree of a value in the fuzzy set. The second modifier is a “more or less” fuzzy expansion operator because it increases the degree of membership [25]. These functions are
where x,…,xN are the characteristics for the selection problem, \(A_{1}^{k}\),…,\(A_{N}^{k}\) are linguistic values used to discretize the continuous value of the criteria. The illustration of their effects on a normalized fuzzy set with TFN is shown in Fig. 2.
We can offer a new expression for the aggregation procedure for “more or less” or “very” hedges using some geometric properties of area elements (Fig. 3). These properties use aggregation operations to convert linguistic terms as crisp equivalents. Exparabolic and parabolic area calculations are a suitable way to convert linguistic terms to a crisp value.
Let \(\widetilde{A}\)=(a, b, c), a fuzzy triangular number, the aggregated equivalent of exparabolic shape (Fig. 4) can be expressed as follows:
Total area for exparabolic is
To aggregation process, we can divide the medium number of the TFN to this area:
To calculate cross lined segment area (Fig. 5), we express following equations:
Semi-area (Fig. 6) for aggregation can be calculated for more or less is
Finally, we can calculate total area for more or less total area (Fig. 7) is as follows:
To aggregation process, we can divide the medium number of the TFN to this area:
The same procedure can be developed for triangular shape:
Now, we can develop the new fuzzy TOPSIS application steps:
Step 1. Determine fuzzy decision matrix (\(\tilde{D}\))
where the element \({\widetilde{x}}_{ij}\) represents the triangular fuzzy number equivalent of the linguistic performance value of the alternative. Here, m is expressed as (i = 1,2,…,k alternatives) and j = 1,2,…., n, criteria [2, 6, 10, 23, 24].
Step 2. Obtain aggregate TFN.
For triangular area:
For exparabolic area:
For parabolic area:
These aggregation operations provide better identification of TFN-based expert opinions. Dividing the medium value of the TFN (b) to the geometric shape area indicates not only the importance of the criteria or alternative rating but also the uncertainty degree of the linguistic expression. The larger value is the better type of evaluation suitable for assigning the criteria weights and alternative rantings.
Step 3. Set the normalized decision matrix using vector normalization method [23]:
Step 4. Set the weighted normalized decision matrix (vij):
where wj is the aggregate criteria weight calculated from triangular, exparabolic, or parabolic area calculation procedures in Eqs. (15–17).
Step 5. Calculate positive and negative ideal solutions:
where I is a benefit type measure and I′ is the cost type measure.
Step 6. Calculate the separation measures:
Step 7. Calculate the ranking scores:
3 Examples
We applied the proposed methodology to the two selection problems using the fuzzy TOPSIS method in the literature. The first example is related to robot selection [8], and the second example is related to software programmer selection [17]. Firstly, we applied the proposed methodology to these problems and discussed the suitability and advantages of the proposed methodology using a comparative analysis in the following sections.
3.1 Example 1: Robot selection problem
The robot selection problem from Chu and Lin [8] is applied to show the suitability of the proposed procedure. Chu and Lin [8] assumed that a manufacturing firm requires a robot to perform a material-handling task. Three candidates, a1, a2, and a3, are selected for the study. The four experts are set to evaluate the criteria weights and alternative rating scores. The triangular, exparabolic aggregation procedure-based solution and parabolic aggregation procedure-based solution results are presented in Tables 1, 2 and 3, respectively.
3.2 Example 2: Software programmer selection problem
Mahdavi et al. [17] proposed a TOPSIS approach using TFNs. They applied the measurement approach using fuzzy distance values with a lower bound of alternatives. They supposed that a software company desires to select a programmer. Three alternatives, a1, a2, and a3, are determined, and three experts are assigned for the evaluation process. Mahdavi et al. [17] used five benefit criteria that are considered emotional steadiness, oral communication skills, personality, past experience, and self-confidence in their study. The triangular, exparabolic aggregation procedure-based solution and parabolic aggregation procedure-based solution results are presented in Tables 4, 5, and 6, respectively.
3.3 Discussion of the examples’ results
We list the results in Table 7 and apply Spearman’s rank correlation test [24] to analyze ranking differentiations. The Spearman’s rank correlation calculation equation is as follows:
where di is the difference between the two ranks of each observation, t is the number of observations.
Spearman’s correlation coefficient increases in impact as two rankings become closer to being perfectly monotone functions of each other. When two rankings are perfectly matched, Spearman’s correlation coefficient will equal 1.
The ranking scores from the parabolic area calculation-based TOPSIS model are different from triangular and exparabolic area calculation-based TOPSIS results in Chu and Lin’s [8] case problem. So, it is difficult to say which alternative is exactly more suitable than the other. However, a2 is suitable for Chu and Lin’s [8] case problem due to ranking first or second for all approaches. If we can see the decision matrix of example 1, the expert evaluations are very close to each other. So, the proposed aggregation procedures provide two different results based on the “very” or “more or less” hedges for TFNs, and these new procedures are capable of the two-way perspectives for alternatives to select the more suitable one for the defined expectations.
On the other hand, we obtain similar results in example 2. Mahdavi et al. [17] ranking scores results are very close to each other (rs = 0.976). The only differentiation is in a1 and a3 ranking scores. Mahdavi et al. [17] study depends on the small ranking score as a better type of methodology. Also, their ranking scores are very close to alternatives. But the proposed aggregation procedures based on TOPSIS ranking scores are differentiated. The Mahdavi et al. [17] rankings present a smooth graph, but the proposed procedures-based result has a fluctuated shape (Fig. 8). The main advantage of the proposed aggregation procedure is the alternative separation capability analyzed with their linguistic diversification. They have modeling capability for the selection problems that alternative ratings are very closed. They used a geometrical area calculation procedure for the aggregation operator. So, the linguistic differences are much better modeled using developed procedures.
According to the comparative analysis results, we reach the following outcomes about the advantages of the proposed methodology:
-
i.
If the expert’s linguistic evaluations are very close to each other, the proposed procedure uses two-way perspectives (“very” or “more or less” hedges) for alternatives to select the more suitable one for the defined expectations.
-
ii.
The fuzzy TOPSIS model’s ranking scores are very close for exemplified three alternatives (0.5308, 0.451, 0.455) in the Chu and Lin [8] approach. However, the proposed methodology’s result has differentiated between each alternative for the same example (0.346, 0.669, 0.567). In Mahdavi et al.’s [17] ranking, scores are 0.5304, 0.4626, and 0.494, respectively, in example 2. The proposed methodology’s results, for example 2, are 0.208, 0.991, and 0.148, respectively. So, the main advantage of the proposed aggregation procedure is the alternative ranking scores separation capability modeled with their linguistic diversification.
-
iii.
The modeling capability of the proposed methodology has an advantage when alternative ratings are very close. The proposed methodology uses a simple geometrical area calculation procedure for the aggregation operation. So, it has much better modeling capability when the expert’s linguistic expressions are very close.
4 Conclusions
In this work, we described an exparabolic and parabolic shape area calculation-based TFN linguistic expression aggregating procedure for fuzzy TOPSIS models. Furthermore, this procedure provides the best alternative using extended linguistic hedges for the linguistic expressions, hence maintaining the descriptive capabilities of the fuzzy TFNs.
We evaluated the results of different types of fuzzy TFNs-based TOPSIS model in selecting the best alternative. Results from the examples provide only the best alternative, so the presented new procedures consider the extended expressions as hedges and capture the information provided by overlapped expert opinions. The use of the proposed aggregating procedures that consider the information given by all the experts in the TFN expression process increases the generalization ability of the aggregating expressions. Nevertheless, it cannot determine a unique aggregate value as the best suitable for any type of problem, so it will be necessary to set aggregated TFNs for the new problems. This specification is an advantage for the modeling stage of the special TFNs for a specific selection problem. In future work, we intend to extend the application area to design a new kind of TFNs for the different MCDM methods such as GRA, VIKOR, PROMETHEE, and MOORA. On the other hand, the proposed model can be easily applied in different application areas requiring fuzzy multi-criteria decision-making processes, such as product or process quality improvement [12, 20], via evaluating the performance of artificial intelligence model-based predicted parameter values on the experimental or real quality characteristics’ values.
Data availability
Data sharing is not applicable to this article as no datasets were generated or analyzed during the current study.
Abbreviations
- TFNs:
-
Triangular fuzzy numbers
- TOPSIS:
-
The technique for order preferences by similarity to ideal solution
- MCDM:
-
Multi-criteria decision-making
- GRA:
-
Grey relational analysis
- VIKOR:
-
VIseKriterijumska Optimizacija I Kompromisno Resenje: multi-criteria optimization and compromise solution
- PROMETHEE:
-
Preference ranking organization method for enrichment of evaluations
- MOORA:
-
Multi-objective optimization on the basis of ratio analysis
- a i :
-
Alternative
- C i :
-
Criteria
- n :
-
The number of criteria
- k :
-
The number of alternatives
- a :
-
Lover value of the parabolic or exparabolic shapes-based TFNs
- b :
-
Medium value of the parabolic or exparabolic shapes-based TFNs
- c :
-
Upper value of the parabolic or exparabolic shapes-based TFNs
- l :
-
Lover value of the TFN
- m :
-
Medium value of the TFN
- u :
-
Upper value of the TFN
- A * :
-
Positive ideal solution
- A − :
-
Negative ideal solution
- D + :
-
Separation measure for positive ideal solution
- D − :
-
Separation measure for negative ideal solution
- I :
-
Benefit type measure
- I′:
-
Cost type measure
- C i * :
-
Ranking score
- W :
-
Criteria Weight
- w j :
-
The aggregate criteria weight
- V ij :
-
Weighted normalized decision matrix
- \(\widetilde{D}\) :
-
Fuzzy decision matrix
- \(\widetilde{A} , \widetilde{B}\) :
-
Fuzzy triangular numbers
- x ij :
-
Aggregate value for the area
- \({\widetilde{x}}_{ij}\) :
-
The TFN equivalent of the linguistic performance value of the alternative
- μ(x):
-
Membership function for the TFN
- \({\mu }_{{A}_{i}^{k}}\left(x\right)\) :
-
Membership function for the exparabolic or parabolic TFN
- x N :
-
The characteristics for the selection problem
- \(A_{N}^{k}\) :
-
The linguistic values used to discretize the continuous value of the criteria
- \({r}_{{\text{s}}}\) :
-
Spearman’s rank correlation coefficient
- d i :
-
The difference between the two ranks of each observation
- t :
-
The number of observations
- A :
-
Total area for exparabolic shape TFN
- \(B\) :
-
Cross lined segment area for special segments
- D :
-
Total area for more or less segment
- C :
-
Semi-area for semi-parabolic area segment
References
Amindoust A, Ahmed S, Saghafinia A, Bahreininejad A (2012) Sustainable supplier selection: a ranking model based on fuzzy inference system. Appl Soft Comput 12(6):1668–1677
Chen CT (2000) Extensions of the TOPSIS for group decision-making under fuzzy environment. Fuzzy Set Syst 114:1–9
Chisale SW, Lee HS (2023) Evaluation of barriers and solutions to renewable energy acceleration in Malawi, Africa, using AHP and fuzzy TOPSIS approach. Energy Sustain Dev 76:101272
Chai N, Zhou W, Jiang Z (2023) Sustainable supplier selection using an intuitionistic and interval-valued fuzzy MCDM approach based on cumulative prospect theory. Inf Sci 626:710–737
Chan FT, Prakash A (2012) Maintenance policy selection in manufacturing firms using the fuzzy MCDM approach. Int J Prod Res 50(23):7044–7056
Chen SJ, Hwang CL (1992) Fuzzy multiple attribute decision making. Springer, Berlin Heidelberg
Chen TCT, Lin CW (2022) An FGM decomposition-based fuzzy MCDM method for selecting smart technology applications to support mobile health care during and after the COVID-19 pandemic. Appl Soft Comput 121:108758
Chu TC, Lin YC (2003) A fuzzy TOPSIS method for robot selection. Int J Adv Manuf Technol 21:284–290
Huang Z, Yue H, He Q (2023) Method of TFN-TOPSIS based on possibility degree relation model and its application in the patent value estimation of self-balancing vehicles. Sustainability 15(4):3793
Ic YT, Yurdakul M (2009) Development of a decision support system for machining center selection. Expert Syst Appl 36:3505–3513
Keršulienė V, Turskis Z (2011) Integrated fuzzy multiple criteria decision making model for architect selection. Technol Econ Dev Econ 17(4):645–666
Koçak S, İç YT, Atalay KD, Sert M, Dengiz B (2023) The development of a reviewer selection method: a multi-level hesitant fuzzy VIKOR and TOPSIS approaches. J Ambient Intell Humaniz Comput 14:3275–3302
Lam KC, Tao R, Lam MCK (2010) A material supplier selection model for property developers using fuzzy principal component analysis. Autom Constr 19(5):608–618
Li F, Li L, Jin C, Wang R, Wang H, Yang L (2012) A 3PL supplier selection model based on fuzzy sets. Comput Oper Res 39(8):1879–1884
Li T, Zhang W, Xu W (2015) A fuzzy portfolio selection model with background risk. Appl Math Comput 256:505–513
Liu HT (2011) Product design and selection using fuzzy QFD and fuzzy MCDM approaches. Appl Math Model 35(1):482–496
Mahdavi I, Mahdavi-Amiri N, Heidarzade A, Nourifar R (2008) Designing a model of fuzzy TOPSIS in multiple criteria decision making. Appl Math Comput 206(2):607–617
Memari A, Dargi A, Jokar MRA, Ahmad R, Rahim ARA (2019) Sustainable supplier selection: a multi-criteria intuitionistic fuzzy TOPSIS method. J Manuf Syst 50:9–24
Mougouei D, Powers DM (2017) Modeling and selection of interdependent software requirements using fuzzy graphs. Int J Fuzzy Syst 19:1812–1828
Moaf FO, Kazemi F, Abdelgader HS, Kurpińska M (2023) Machine learning-based prediction of preplaced aggregate concrete characteristics. Eng Appl Artif Intell 123:106387
Rahimdel MJ, Karamoozian M (2014) Fuzzy TOPSIS method to primary crusher selection for Golegohar iron mine (Iran). J Cent South Univ 21:4352–4359
Saaty TL (2006) Fundamentals of decision making with the analytic hierarcy process. The analytic hierarcy process series, vol 6. RWS Publications, Pittsburg
Sen P, Yang JB (1998) Multiple attributes decision support in engineering design. Springer, London
Yurdakul M, Ic YT (2009) Analysis of the benefit generated by using fuzzy numbers in a TOPSIS model developed for machine tool selection problems. J Mater Process Tech 209(1):310–317
Zadeh LA (1975) The concept of a linguistic variable and its application to approximate reasoning—I. Inf Sci 8(3):199–249
Zhang X, Aslam A, Saeed S, Razzaque A, Kanwal S (2023) Investigation for metallic crystals through chemical invariants, QSPR and fuzzy-TOPSIS. Journal of Biomolecular Structure and Dynamics, 1–12
Funding
Open access funding provided by the Scientific and Technological Research Council of Türkiye (TÜBİTAK).
Author information
Authors and Affiliations
Contributions
YTI was involved in conceptualization, supervision, methodology, validation, visualization, writing–review & editing.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no potential conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Ic, Y.T. A fuzzy computing approach to aggregate expert opinions using parabolic and exparabolic approximation procedures for solving multi-criteria group decision-making problems. Neural Comput & Applic 36, 7105–7117 (2024). https://doi.org/10.1007/s00521-024-09448-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00521-024-09448-w