Abstract
A priority of the industrial applications of microalgae is the reduction of production costs while maximizing algae biomass productivity. The purpose of this study was to carry out a comprehensive evaluation of the effects of pH control on the production of Nannochloropsis gaditana in tubular photobioreactors under external conditions while considering the environmental, biological, and operational parameters of the process. Experiments were carried out in 3.0 m3 tubular photobioreactors under outdoor conditions. The pH values evaluated were 6.0, 7.0, 8.0, 9.0, and 10.0, which were controlled by injecting pure CO2 on-demand. The results have shown that the ideal pH for microalgal growth was 8.0, with higher values of biomass productivity (Pb) (0.16 g L−1 d−1), and CO2 use efficiency (\(E_{\text{CO}_{2}}\)) (74.6% w w−1); \(R_{\text{CO}_{2}}\)/biomass value obtained at this pH (2.42 \(\text{g}_{\text{CO}_{2}}\) gbiomass−1) was close to the theoretical value, indicating an adequate CO2 supply. At this pH, the system was more stable and required a lower number of CO2 injections than the other treatments. At pH 6.0, there was a decrease in the Pb and \(E_{\text{CO}_{2}}\); cultures at pH 10.0 exhibited a lower Pb and photosynthetic efficiency as well. These results imply that controlling the pH at an optimum value allows higher CO2 conversions in biomass to be achieved and contributes to the reduction in costs of the microalgae production process.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Biotechnological applications using microalgae have expanded, owing to the skill of these microorganisms to produce biomass enriched in compounds such as proteins, lipids, pigments, carbohydrates, and fatty acids [1]. Microalgae are used in wastewater treatment [2], carbon dioxide fixation [3], biofertilizers, biofuels, food items, feeds, cosmetic products [4], high-value compounds (including pigments such as astaxanthin and β-carotene), and polyunsaturated fatty acid production [5,6,7]. Nannochloropsis gaditana is a unicellular microalga belonging to the class Eustigmatophyceae, and has been extensively studied owing to its high lipid content and adequate profile for aquaculture and potential applications as biofuel [5, 7,8,9,10]. Besides, this strain can be cultivated under outdoor conditions in bioreactors with different designs [5, 11, 12].
Efficient microalgae growth can be influenced by nutritional components (carbon, nitrogen, and phosphorus), bioreactor designs, and physicochemical parameters (temperature, light, and pH) [1, 5, 9, 13,14,15]. Variations in pH can influence nutrient availability in the culture medium and change the metabolic pathways controlling microalgae growth, thereby affecting their photosynthetic efficiency, productivity, and biomass composition [1, 15,16,17,18]. The pH range for most microalgae is 7.0–9.0 [19], whereas strains such as Spirulina, show greater growth at pH 9.0–10.0 [20]. pH in microalgae cultures can be controlled using buffers, CO2 injection, or acids and bases [15, 18, 21]. CO2 injection is considered one of the most suitable methods for pH control as it also provides a source of carbon for the cultivation and maintenance of large-scale production of microalgal biomass [22]. CO2 supply represents a massive contributor to production costs [23]. Therefore, CO2 must be efficiently utilized while maintaining the pH in the ideal range, as it provides the necessary amount of carbon for growth, minimizing exhaustion losses and costs during production [1].
pH is a physicochemical parameter capable of influencing not only the chemical balance of carbon, but also the transfer of CO2 gas–liquid mass. The carbon source balance in the liquid medium affects chemical equilibrium (CO2(g) ↔ CO2(aq) ↔ H2CO3 ↔ HCO3− ↔ CO32−), which is pH dependent. In microalgal cultivation, this balance can be altered when, for example, CO2 is added to the culture, removed by photosynthesis, or lost into the atmosphere. At a pH between 4.0 and 6.5, the CO2 concentration is 5–6 times higher than the concentrations of other chemical species, whereas between pH 7.0 and 9.5, the HCO3− concentration is higher than the concentrations of other species [24].
The total concentration of dissolved inorganic carbon determines whether the aqueous phase is saturated with CO2 in relation to the gas phase. The difference between CO2 concentration in the liquid phase and that in equilibrium with the gas phase ([CO2*]—[CO2]) is defined as the driving force for the mass transfer of this compound. This gradient can be used to calculate the net amount of CO2 transferred from the gaseous to the aqueous phase, which, in addition to the driving force, also takes into account the volumetric mass transfer coefficient. This parameter is independent of pH, but the driving force is pH dependent [25]. Godos et al. [26] have shown that cultivation of microalgae at alkaline pH can improve CO2 absorption, as it increases the driving force and minimizes system decarbonization. However, an equilibrium condition must be maintained to enable microalgal growth while maintaining CO2 mass transfer into the medium.
Although these studies verified the influence of pH on microalgae cultures, an investigation that takes into account cell growth, biomolecule concentration in biomass, as well as process operational parameters for evaluating the effects of pH on large-scale microalgae production is necessary. Thus, in the present study, a comprehensive evaluation of the effects of pH control on outdoor cultures of N. gaditana was carried out, with a focus on biomass productivity, chlorophyll fluorescence, supply, and CO2 use efficiency.
Material and methods
Microalgae strain and culture medium
The microalga used in this study, N. gaditana, was from a collection of cultures of the research group, "Biotechnology of Marine Microalgae of the University of Almería (Spain)". The culture medium for the growth of microalgae was composed of artificial seawater (30 g L−1 NaCl) and micronutrients from agricultural fertilizers, such as calcium nitrate (Ca(NO3)2, 0.8 g L−1), potassium monobasic phosphate (KH2PO4, 0.25 g L−1), magnesium sulfate (MgSO4, 0.3 g L−1), Welgro Hidroponic (0.02 mL L−1), and Karentol (0.02 g L−1). These micronutrients include the following elements (mg L−1): B (0.23), Cu (0.09), Fe (2.10), Mn (1.17), Mo (0.07), and Zn (0.35) [27]. The culture medium used for propagation of the inoculum and in experiments was filtered through an ultrafiltration system (0.02 μm pore membrane; SFP 2860; DOW™ Ultrafiltration Modules, DOW®, China) and sterilized with ozone [28].
Inoculum propagation
The inoculum was first propagated on a laboratory scale before the pilot-scale (outdoor conditions). Under outdoor conditions, the inoculum grew inside a greenhouse, in bubble column photobioreactors (total volume 0.1 m3), with pH and temperature control and constant aeration. The pH of the inoculum was maintained at 7.8–8.0 by on-demand CO2 supply.
Tubular photobioreactors
Experiments were carried out in pilot-scale photobioreactors (3.0 m3) located inside a greenhouse at the “Estación Experimental Las Palmerillas” belonging to Fundación CAJAMAR (Almería, Spain). The tubular photobioreactors (useful volume 2.6 m3) consist of light receivers (19 m length, 0.09 m diameter) and a bubble column (3.5 m height, 0.5 m diameter). The light receivers are made of transparent tubes, united in a loop configuration, with a total horizontal length of 400 m. The tube diameter was optimized to maximize the culture volume per reactor while minimizing yield loss by an excessive light path for photosynthesis. The tubes are optimally arranged to maximize the interception of solar radiation. The culture was provided with continuous recirculation (0.9 m s−1) by a centrifugal pump located between the bubble column and light receivers [5, 29]. Compressed air was injected into the bubble column at a flow rate of 200 L min−1 to eliminate accumulated gases (mainly oxygen) from the tubular photobioreactor [5, 14]. To increase residence time of the carbon source in the liquid medium, the CO2 was injected at the beginning of the tubular section, as shown in Fig. 1. The culture temperature was kept below 30 °C by passing room temperature water at a flow rate of 1.5 m3 h−1, through stainless steel heat exchangers located inside the bubble column. The photobioreactors were equipped with dissolved oxygen (OD5120 Crison, Spain), pH, and temperature probes (pH5083T Crison, Spain) located at the end of the loop and connected to a multimeter (MM44, Crison, Spain). The solar radiation received was measured by a thermoelectric pyranometer connected to an AC-420 adapter (LP-02, Geónica S.A., Spain). The probes and thermoelectric pyranometer were connected to a transmitter (Labjack U12), for data transmission to a data acquisition software (Daqfactory, Azeotech, Arizona, USA) which allowed for a complete monitoring and control of the facility [5, 30, 31].
Cultivation conditions
N. gaditana cultures were cultivated at different pH setpoints (6.0, 7.0, 8.0, 9.0, and 10.0); a parameter controlled by injecting pure CO2 on-demand. Cultures were maintained for 7 days at the set pH, except for the set-up at pH 6.0. This one was evaluated for 1 day, because the CO2 flow rate used did not reach the pH of the setpoint and has resulted in an excess of CO2 supplied, making it an expensive process. The CO2 was supplied on-demand into the cultures via a solenoid valve-controlled CO2 injection at a flow rate of 1.9 mL CO2 Lculture−1 min−1 (0.2 kgf cm−2 working pressure), monitored by flow meters (FR4500, Key Instruments, USA). An automatic control on/off switch is triggered when the pH reached the setpoint during the light period (with solar radiation > 30 W m−2) [28]. The experiments were carried out between August and September (summer) in a semicontinuous mode with a dilution rate of 0.16 d−1. Prior to dilution, the biomass was recovered from the liquid medium by centrifugation and the culture medium was recirculated, cleaned up (ultrafiltration + ozone), and stored (nutrients replenished) for reuse in the next dilution. Experiments were carried out in three equivalent tubular reactors operating in parallel under the same operation conditions; with continuous (24 h) monitoring and data collected for all parameters every minute.
Analytical determinations of microalgal cultures
Biomass concentration
The biomass concentration (Cb) was determined according to the dry weight. Briefly, 50 mL of culture was vacuum filtered through a glass microfiber filter (Whatman™) with a pore size of 0.7 μm. The biomass was washed with 50 mL of an ammonium formate solution (1.25% w v−1) to remove nutrients adhered on microalgae cells before drying in an oven at 80 °C for 24 h and then weighed [14, 28].
Fluorescence of chlorophyll
Chlorophyll fluorescence or the maximum quantum yield (Fv/Fm) was determined according to the ratio of the variable fluorescence (Fv) to maximum fluorescence (Fm) using a fluorimeter (AquaPen AP 100, Photon Systems Instruments, Czech Republic) [5, 14].
Microscopic observations
Microscopic observations of cultures were carried out daily (Leica, ICC50 HD, Germany) to ensure that the N. gaditana strain was the dominant microorganism throughout the experimental period [28].
Total inorganic carbon concentration and carbon equilibrium fractions
The total inorganic carbon concentrations (TIC, mg L−1) in the inlet and outlet culture medium (dilution) were determined by an analysis kit (Hach-Lange LKC 381, Germany) and photometer (Dr Lange LASA 50, Germany) [28]. From the TIC results and pH values, the concentrations of carbon fractions in the equilibrium in the medium (CO2, HCO3−, and CO32−) were calculated using the equation [TIC] = [CO2] + [HCO3−] + [CO32−], as demonstrated by Andrade et al. [24].
Independent and response variables
The independent variable was the imposed pH, whereas environmental variables that could not be controlled, such as solar radiation and temperature, were measured and registered online. The direct response variables were dissolved oxygen (D.O), the pH profile of the culture, the number and duration of CO2 injections, and the overall mass flow of the supplied CO2. All these variables were also measured and registered online using a data acquisition software (Daqfactory, Azeotech, Arizona, USA).
Biomass productivity
Biomass productivity (Pb, g L−1 d−1) was calculated by applying the following equation: Pb = Cb D, where Cb is the biomass concentration (g L−1) and D is dilution rate (d−1) [32].
Carbon dioxide demand and efficiency
The carbon dioxide demand by cultures (\(D_{\text{CO}_{2}}\), g d−1) was calculated by the following equation: \(D_{\text{CO}_{2}}\) = Pb Vwork xcbm (\(\text{MM}_{\text{CO}_{2}}\)/MMC), where Pb (g L−1 d−1) is the biomass productivity, Vwork (L) is the working volume of photobioreactor, xcbm is a mass fraction of the carbon in biomass (considered 0.5 gcarbon gbiomass−1), \(\text{MM}_{\text{CO}_{2}}\) (g mol−1) and MMC (g mol−1) are molecular weights of carbon dioxide and carbon, respectively.
The carbon dioxide use efficiency (\(E_{\text{CO}_{2}}\), % w w−1) was calculated by the following equation: \(E_{\text{CO}_{2}}\) = \(D_{\text{CO}_{2}}\)/ṁ, from the ratio of CO2 demand (\(D_{\text{CO}_{2}}\), g d−1) and CO2 mass rate (\(\dot{m}_{\text{CO}_{2}}\), g d−1) supplied to the cultures [28].
Ratio between carbon dioxide supply and biomass production
The ratio between the CO2 supply and biomass production (\(R_{\text{CO}_{2}}\)/biomass, \(\text{g}_{\text{CO}_{2}}\) gbiomass−1) was calculated by the following equation: \(R_{\text{CO}_{2}}\)/biomass = \(\dot{m}_{\text{CO}_{2}}\)/(Pb Vwork), where \(\dot{m}_{\text{CO}_{2}}\) (g d−1) is the CO2 mass supplied in the cultures, Pb (g L−1 d−1) is the biomass productivity, and Vwork (L) is the photobioreactor working volume [28].
Statistical analysis
The results of the experiments were assessed by analysis of variance (ANOVA) (one-way ANOVA) followed by Tukey’s test for the comparison of means at a 90% confidence level.
Results and discussion
All experiments were performed in the summer months of August and September, during which the daylight periods had a recorded maximum solar radiation of 482.5 W m−2, with mean, maximum, and minimum temperature values of 31 °C, 33.7 °C, and 25.9 °C, respectively (Fig. 2). The photobioreactors were under temperature control, essential for outdoor cultures that may be exposed to varying temperatures, as experienced in summer. In this season, the room temperature can reach values above 40 °C with a greenhouse reporting well above 50 °C. As observed in Fig. 2, the heat exchange system efficiently kept the culture temperature below 35 °C. According to Arbib et al. [33], factors such as temperature and light have strong influences on the performance of microalgal cultures; and the monitoring of these parameters must be conducted in cultures under outdoor conditions [33]. Figueroa et al. [34] reported that the exposure of N. gaditana to 40 °C may cause irreversible damage to the cell photosynthesis apparatus. However, after a dark period at 25 °C, when the strain was maintained at 25–35 °C with a light incidence between 30 and 300 W m−2, it recovered full photochemical efficiency (Fv/Fm). Further, Camacho-Rodríguez et al. [5] evaluated the effects of reactor geometry, pH control, and dilution rates on the performance of N. gaditana cultures during different seasons. The authors noted that the strain when cultivated in the summer, in the same photobioreactor geometry as used in the present study, tolerated high temperatures (32 °C) and solar radiation, reaching biomass productivity (0.2 g L−1 d−1) higher than the values observed during the other seasons of the year.
This study has observed that dissolved oxygen (D.O.) gradually increased with an increase in solar radiation in the experiment cultures at pH 8.0. The D.O. between 0 and 8 h was 88.4% sat., increasing thereafter until a maximum concentration of 271.5% sat. (15 h) and maintained at 258.2% between 12 and 16 h (Fig. 2). D.O. in the photobioreactor did not accumulate to a large extent, which may be attributed to the continuous aeration of cultures in the bubble column that helped desorb the accumulated gases, mainly oxygen. In evaluating the D.O. concentration profile in Scenedesmus obliquus cultures in tubular photobioreactors under outdoor conditions, Arbib et al. [33] have observed D.O. concentration between 65 and 70% sat. in the first hours of the day, which increased to a maximum value of 150% sat. at 15 h, as solar radiation increases. These authors have also reported that an increase in temperature (above 35 °C) inhibited culture growth, thus reducing the D.O. concentration, even with the increase in solar radiation. Ippoliti et al. [14] studied Tisochrysis lutea cultures in tubular photobioreactors under outdoor conditions and observed a maximum D.O. value of 300% sat. It is known that the oxygen accumulation inside the photobioreactor may contribute to photorespiration and a resultant decrease in biomass productivity.
According to Acién et al. [1], reactions involving the consumption of nutrients, such as carbon and nitrogen, can cause variations in the pH of the cultures. Efficient methods must, therefore, be employed to maintain pH in the appropriate range. One of the most commonly used methods of pH control is the on-demand injection of CO2. In addition to maintaining the ideal pH value for the optimal performance of the cultures, CO2 injection supplies cells with a carbon source. Apart from pure CO2 injection, carbon may also be supplied mixed with air or flue gases. Regardless of the form used, the carbon supply to cultures should be properly designed to maximize the CO2 use efficiency by microalgae and to minimize the pH changes in the photobioreactor. According to reports from Jiang et al. [35], Godos et al. [26] and Santos et al. [36], the on-demand supply of CO2 is considered to be an appropriate method because it contributes to pH control, improves the conversion efficiency of carbon in biomass, and reduces losses to the atmosphere.
The pH control of the current study was done on-demand by injection of CO2 with setpoints modified to the range of 6.0–10.0 (Fig. 3a–e). In cultures at pH 7.0, 8.0, and 9.0 (Fig. 3b–d), the system pH control was stable. However, at pH 6.0, the system remained at its maximal limit capacity during the entire light phase, but could not maintain the pH at the setpoint; it being verified a mean pH value of 6.51 (Table 1). Under this experimental condition, the maximum number of CO2 valve activations (698) (Fig. 3a) was observed, with valves remaining open nearly 100% of the time (Table 1) in the light period between 8 and 20 h (Fig. 4a). In cultures at pH 8.0 (mean pH value, 7.83), the system was more stable, with a significantly lower number of CO2 valve activations (158) (Fig. 3c), remaining open only on an average of 14.8% of the time in the light phase (Table 1), with significant difference of the other experiments (p < 0.10). According to Moraes et al. [28], the opening frequency of the CO2 valve may be used to determine the total CO2 injected and, in an ideal setting, would be similar to the net CO2 demand of the culture. In Fig. 4a, when the pH setpoint was 6.0, the CO2 injection valve remained open all the time and the CO2 injection was constant at 332.5 L h−1 between 8 and 20 h. On the other hand, at pH 8.0, the opening frequency was higher at midday than in the morning or afternoon, as expected. Thus, the CO2 injection rate profile follows the typical variation of sunlight, reaching a mean value of 82.9 L h−1 injected CO2 between 13 and 15 h, and peaking at 117.6 L h−1 (Fig. 4c). Therefore, an increase in the pH setpoint from 6.0 to 8.0 resulted in 85.1% reduction in the number of times the CO2 valve was activated during control pH, which resulted in higher biomass productivity. In the cultures at pH 10.0, the setpoint was not reached (mean value pH 9.15) (Table 1); thus, no activations of the CO2 valve were reported (Figs. 3e, 4e). In this case, as seen in Fig. 4b–e, the amount of CO2 injected was inversely proportional to the increase in the pH set. Pawlowski et al. [37, 38] reported the activation number of the CO2 valve during pH control as an important parameter in evaluating cost reduction along with energy, equipment maintenance, and carbon supply for the cultures.
Microalgae biomass productivity (Pb) is highly influenced by environmental (e.g., temperature and irradiance) and operating conditions (e.g., pH control, bioreactor width or dilution rate) [5]. For cultures of N. gaditana at pH 8.0, the highest biomass productivity obtained was 0.16 g L−1 d−1, with a biomass concentration of 0.98 g L−1; these values were statistically equal (p > 0.10) to those of cultures at pH 7.0 (mean pH value, 7.00) (Table 1). Cultures at lower (6.0) or higher than 8.0 (9.0 and 10.0) pH values demonstrated a reduction in biomass productivity. Corroborated results were reported by Barley et al. [18] in their study on the cultures of N. salina, with pH 8.0 found ideal for the maximum growth and lipids accumulation of the strain, as well as for minimizing the growth of undesirable microorganisms. Also, N. salina culture did not grow at pH 10.0, although it maintained growth at pH 7.0 until the 30th day of cultivation.
Using 40 mM Tris/HCl buffer to control their cultures pH, Rocha et al. [21] showed similar results in N. gaditana, while Khatoon et al. [16] observed that the highest cell densities in Nannochloropsis sp. cultures occurred in the pH range 7.5–8.5; above these values, growth decreased. According to Kosourov et al. [39], higher pH conditions promote a reduction in photosynthetic activities, thus affecting the metabolic processes of microalgal cells.
In the current study, it has been observed that at the pH range of 6.0–9.0, the Fv/Fm values varied from 0.64 to 0.68, with no statistical difference between experiments (p > 0.10). Cultures at pH 10.0 recorded the lowest Fv/Fm value (0.60), suggesting that these experimental conditions potentially reduce the photosynthetic efficiency of cells. Likewise, Sánchez et al. [40] attributed the reduction of the Fv/Fm value to stress in Scenedesmus almeriensis cells cultured at pH 10.0.
According to Moraes et al. [28], to determine the total amount of CO2 effectively fixed in the microalgal biomass, a global mass balance must be performed. In the present study, cultures at pH 6.0 and 7.0 demanded significantly higher CO2 mass supply rate for pH control, compared to the other treatments (p < 0.10) (Table 1). This is observed in the CO2 mass (Fig. 3a, b) and CO2 flow rate profiles (Fig. 4a, b) over the light period for cultures at these pH values. The estimated CO2 demand by cultures is a function of their biomass productivity. The highest CO2 demands were required by experiments at pH 7.0 and 8.0, with corresponding higher Pb values that are significantly different from the other treatments (p < 0.10). The CO2 use efficiency (\(E_{\text{CO}_{2}}\)) correlated for the cultures at pH 6.0 and 7.0 were 8.0% and 23.2% (w w−1), respectively. Therefore, these experimental conditions resulted in reduced assimilation and increased exhaustion of the supplied CO2 mass. However, cultures at pH 8.0 efficiently utilized the CO2 mass supplied, maintaining sufficient growth of the microalgae while controlling the culture pH (Table 1). This was demonstrated by the statistically higher (p < 0.10) value of \(E_{\text{CO}_{2}}\) (74.6% w w−1) achieved in these cultures. Thus, pH 8.0 was ideal for growth and the efficient conversion of CO2 into biomass in N. gaditana cultures. In the experiments at pH 9.0 and 10.0, the mass of injected CO2 did not meet the carbon demand of the cultures. In that case, the recirculated medium may have supplied the carbon needed for the growth of cultures at these pHs.
In an evaluation by Acién et al. [23], the raw materials for microalgae cultivation are 7.8% of the overall production costs, with CO2 contributing 36.5%. When the \(R_{\text{CO}_{2}}\)/biomass value is close to the theoretical value, a high CO2 use efficiency is indicated. The calculated \(R_{\text{CO}_{2}}\)/biomass values were statistically different (p < 0.10) in all experiments. To produce 1 g of the biomass of N. gaditana at pH 6.0 and 7.0, the cultures required 21.8 and 7.8 g of CO2, respectively. However, at pH was 8.0, the \(R_{\text{CO}_{2}}\)/biomass was 2.42 \(\text{g}_{\text{CO}_{2}}\) gbiomass−1, close to the theoretical value of 1.8 \(\text{g}_{\text{CO}_{2}}\) gbiomass−1 reported by Acién et al. [23]. To determine the ideal value for Chlorella sorokiniana DOE1412 cultures, Qiu et al. [15] have evaluated different pH values and observed that the ideal pH for the growth of this strain was 6.5. Under this condition, excess CO2 injected resulted in higher biomass productivity, howbeit, with poor use efficiency (13.3 \(\text{g}_{\text{CO}_{2}}\) to produce 1 g of biomass). However, pH 8.0, an experimental condition considered more profitable for the cultivation of C. sorokiniana, the \(R_{\text{CO}_{2}}\)/biomass achieved is 2.01 \(\text{g}_{\text{CO}_{2}}\).
The total inorganic carbon concentration (TIC) has found in the inlet culture medium used at each dilution was between 118 and 122 mg L−1. This medium was not supplemented with bicarbonate since the TIC from the water used in media preparation and the carbon supply accumulates in the recirculated medium. TIC concentrations in the outlet medium, at pH values of 6.0 (110 mg L−1), 8.0 (106 mg L−1), 9.0 (116 mg L−1), and 10.0 (95 mg L−1) were lower than those observed in the inlet medium. Thus, some of the inorganic carbon in the culture medium may have been consumed by the microalgae during photosynthesis or lost by exhaust. In the cultures at pH 7.0 (118 mg L−1), the TIC in the inlet and media was the same. Andrade et al. [24] reported that the CO2 consumption during photosynthesis or lost to the atmosphere may cause disturbances in the culture chemical equilibrium, with possible reestablishment through displacement reactions. The injection of CO2 caused a reduction in pH by the formation of H2CO3; whereas the consumption or loss of CO2 triggered a shift in this CO32− ions equilibrium, causing a rise in pH and a decrease in the TIC concentration. According to Acién et al. [25] and Andrade et al. [24], the pH of the aqueous phase determines the relative concentration of carbon species, with CO2 being the predominant form of carbon at an acidic pH, HCO3− being the predominant chemical species between pH 6.5 and 10.5, and CO32− being the predominant form above this range. According to Acién et al. [25], the concentration of each species is influenced by the TIC, which determines if or not the aqueous phase is CO2 saturated with respect to the gaseous phase. In this study, when the average pH was 6.51 (pH setpoint 6.0), CO2 (54 mg L−1) and bicarbonate (56 mg L−1) were the predominant chemical species of carbon. However, the increase in pH from 6.51 to 7.83 resulted in an increase in the concentration of HCO3− by 80.5%. In that sense, the predominant chemical species carbon was HCO3−, which according to Kassim and Meng [41] can be dehydrated by the enzyme carbonic anhydrase or transported into the cell and metabolized by microalgae during the Calvin cycle.
Conclusions
The data presented in this study demonstrated that optimizing the pH for the N. gaditana, and set control of this parameter in cultures under outdoor conditions allows for higher biomass productivities and CO2 use efficiencies, reducing carbon losses to the atmosphere and overall process costs. In this context, the pH control by CO2 on-demand, besides promoting the control this one, also contributes to the carbon supply by the cultures. At pH 8.0, N. gaditana cultures in tubular photobioreactors, under outdoor conditions, have presented the highest biomass productivity (0.16 g L−1 d−1), CO2 use efficiency (74.6% w w−1) with \(R_{\text{CO}_{2}}\)/biomass (2.42 \(\text{g}_{\text{CO}_{2}}\) gbiomass−1) close to the theoretical value, indicating that the CO2 supply was adequate.
References
Acién FG, Grima EM, Reis A et al (2017) Photobioreactors for the production of microalgae. In: Gonzalez-Fernandez C, Muñoz R (eds) Microalgae-based biofuels and bioproducts from feedstock cultivation to end-products. Woodhead Publishing, Cambridge, pp 1–44
Trentin G, Bertucco A, Sforza E (2019) Mixotrophy in Synechocystis sp. for the treatment of wastewater with high nutrient content: effect of CO2 and light. Bioprocess Biosyst Eng 42:1661–1669. https://doi.org/10.1007/s00449-019-02162-1
Ramos-Ibarra JR, Snell-Castro R, Neria-Casillas JA, Choix FJ (2019) Biotechnological potential of Chlorella sp. and Scenedesmus sp. microalgae to endure high CO2 and methane concentrations from biogas. Bioprocess Biosyst Eng 42:1603–1610. https://doi.org/10.1007/s00449-019-02157-y
Rizwan M, Mujtaba G, Memon SA et al (2018) Exploring the potential of microalgae for new biotechnology applications and beyond: a review. Renew Sustain Energy Rev 92:394–404. https://doi.org/10.1016/j.rser.2018.04.034
Camacho-Rodríguez J, González-Céspedes AM, Cerón-García MC et al (2014) A quantitative study of eicosapentaenoic acid (EPA) production by Nannochloropsis gaditana for aquaculture as a function of dilution rate, temperature and average irradiance. Appl Microbiol Biotechnol 98:2429–2440. https://doi.org/10.1007/s00253-013-5413-9
Camacho-Rodríguez J, Cerón-García MC, Fernández-Sevilla JM, Molina-Grima E (2015) The influence of culture conditions on biomass and high value product generation by Nannochloropsis gaditana in aquaculture. Algal Res 11:63–73. https://doi.org/10.1016/j.algal.2015.05.017
Chua ET, Schenk PM (2017) A biorefinery for Nannochloropsis: Induction, harvesting, and extraction of EPA-rich oil and high-value protein. Bioresour Technol 244:1416–1424. https://doi.org/10.1016/j.biortech.2017.05.124
Chukhutsina VU, Fristedt R, Morosinotto T, Croce R (2017) Photoprotection strategies of the alga Nannochloropsis gaditana. Biochim Biophys Acta Bioenerg 1858:544–552. https://doi.org/10.1016/j.bbabio.2017.05.003
San Pedro A, González-López CV, Acién FG, Molina-Grima E (2013) Marine microalgae selection and culture conditions optimization for biodiesel production. Bioresour Technol 134:353–361. https://doi.org/10.1016/j.biortech.2013.02.032
González-López CV, Cerón-García MC, Fernández-Sevilla JM et al (2013) Medium recycling for Nannochloropsis gaditana cultures for aquaculture. Bioresour Technol 129:430–438. https://doi.org/10.1016/j.biortech.2012.11.061
San Pedro A, González-López CV, Acién FG, Molina-Grima E (2015) Outdoor pilot production of Nannochloropsis gaditana: Influence of culture parameters and lipid production rates in raceway ponds. Algal Res 18:205–213. https://doi.org/10.1016/j.algal.2015.02.013
San Pedro A, González-López CV, Acién FG, Molina-Grima E (2014) Outdoor pilot-scale production of Nannochloropsis gaditana: influence of culture parameters and lipid production rates in tubular photobioreactors. Bioresour Technol 169:667–676. https://doi.org/10.1016/j.biortech.2014.07.052
Gupta S, Pawar SB, Pandey RA et al (2019) Outdoor microalgae cultivation in airlift photobioreactor at high irradiance and temperature conditions: effect of batch and fed-batch strategies, photoinhibition, and temperature stress. Bioprocess Biosyst Eng 42:331–344. https://doi.org/10.1007/s00449-018-2037-6
Ippoliti D, González A, Martín I et al (2016) Outdoor production of Tisochrysis lutea in pilot-scale tubular photobioreactors. J Appl Phycol 28:3159–3166. https://doi.org/10.1007/s10811-016-0856-x
Qiu R, Gao S, Lopez PA, Ogden KL (2017) Effects of pH on cell growth, lipid production and CO2 addition of microalgae Chlorella sorokiniana. Algal Res 28:192–199. https://doi.org/10.1016/j.algal.2017.11.004
Khatoon H, Abdu Rahman N, Banerjee S et al (2014) Effects of different salinities and pH on the growth and proximate composition of Nannochloropsis sp. and Tetraselmis sp. isolated from South China Sea cultured under control and natural condition. Int Biodeterior Biodegrad 95:11–18. https://doi.org/10.1016/j.ibiod.2014.06.022
Zhou W, Wang J, Chen P et al (2017) Bio-mitigation of carbon dioxide using microalgal systems: advances and perspectives. Renew Sustain Energy Rev 76:1163–1175. https://doi.org/10.1016/j.rser.2017.03.065
Bartley ML, Boeing WJ, Dungan BN et al (2014) pH effects on growth and lipid accumulation of the biofuel microalgae Nannochloropsis salina and invading organisms. J Appl Phycol 26:1431–1437. https://doi.org/10.1007/s10811-013-0177-2
Wang B, Lan CQ, Horsman M (2012) Closed photobioreactors for production of microalgal biomasses. Biotechnol Adv 30:904–912. https://doi.org/10.1016/j.biotechadv.2012.01.019
Vonshak A (1997) Physiology, cell-biology and biotechnology. In: Vonshak A (ed) Spirulina platensis (Arthrospira). Taylor & Francis, London
Rocha JMS, Garcia JEC, Henriques MHF (2003) Growth aspects of the marine microalga Nannochloropsis gaditana. Biomol Eng 20:237–242. https://doi.org/10.1016/S1389-0344(03)00061-3
Grobbelaar JU (2013) Inorganic algal nutrition. In: Richmond A, Hu Q (eds) Handbook of microalgal culture, 2nd edn. Wiley, Oxford, pp 123–133
Acién FG, Fernández JM, Magán JJ, Molina E (2012) Production cost of a real microalgae production plant and strategies to reduce it. Biotechnol Adv 30:1344–1353. https://doi.org/10.1016/j.biotechadv.2012.02.005
Andrade GA, Pagano DJ, Guzmán JL et al (2016) Distributed sliding mode control of pH in tubular photobioreactors. IEEE Trans Control Syst Technol 24:1160–1173. https://doi.org/10.1109/TCST.2015.2480840
Acién F, Fernández-Sevilla J, Grima E (2016) Supply of CO2 to closed and open photobioreactors. In: Slocombe SP, Benemann JR (eds) Microalgal production for biomass and high-value products. CRC Press, Boca Raton, pp 225–252
Godos I, Mendoza JL, Acién FG et al (2014) Evaluation of carbon dioxide mass transfer in raceway reactors for microalgae culture using flue gases. Bioresour Technol 153:307–314. https://doi.org/10.1016/j.biortech.2013.11.087
Camacho-Rodríguez J, Cerón-García MC, González-López CV et al (2013) A low-cost culture medium for the production of Nannochloropsis gaditana biomass optimized for aquaculture. Bioresour Technol 144:57–66. https://doi.org/10.1016/j.biortech.2013.06.083
Moraes L, Rosa GM, España AM et al (2019) Engineering strategies for the enhancement of Nannochloropsis gaditana outdoor production: influence of the CO2 flow rate on the culture performance in tubular photobioreactors. Process Biochem 76:171–177. https://doi.org/10.1016/j.procbio.2018.10.010
Fernández I, Acién FGF, Berenguel M et al (2014) A lumped parameter chemical-physical model for tubular photobioreactors. Chem Eng Sci 112:116–129. https://doi.org/10.1016/j.ces.2014.03.020
Fernández I, Acién FG, Fernández JM et al (2012) Dynamic model of microalgal production in tubular photobioreactors. Bioresour Technol 126:172–181. https://doi.org/10.1016/j.biortech.2012.08.087
Andrade GA, Berenguel M, Guzmán JL et al (2016) Optimization of biomass production in outdoor tubular photobioreactors. J Process Control 37:58–69. https://doi.org/10.1016/j.jprocont.2015.10.001
Molina-Grima E, Acién FG, García-Camacho F, Chisti Y (1999) Photobioreactors: light regime, mass transfer, and scaleup. J Biotechnol 70:231–247. https://doi.org/10.1016/S0079-6352(99)80118-0
Arbib Z, Ruiz J, Álvarez-Díaz P et al (2013) Effect of pH control by means of flue gas addition on three different photo-bioreactors treating urban wastewater in long-term operation. Ecol Eng 57:226–235. https://doi.org/10.1016/j.ecoleng.2013.04.040
Figueroa FL, Jiménez C, Lubián LM et al (1997) Effects of high irradiance and temperature on photosynthesis and photoinhibition in Nannochloropsis gaditana Lubián (Eustigmatophyceae). J Plant Physiol 151:6–15. https://doi.org/10.1016/S0176-1617(97)80030-2
Jiang Y, Zhang W, Wang J et al (2013) Utilization of simulated flue gas for cultivation of Scenedesmus dimorphus. Bioresour Technol 128:359–364. https://doi.org/10.1016/j.biortech.2012.10.119
Santos TD, Mendoza-Martín JL, Acién Fernández FG et al (2016) Optimization of carbon dioxide supply in raceway reactors: influence of carbon dioxide molar fraction and gas flow rate. Bioresour Technol 212:72–81. https://doi.org/10.1016/j.biortech.2016.04.023
Pawlowski A, Mendoza JL, Guzmán JL et al (2014) Effective utilization of flue gases in raceway reactor with event-based pH control for microalgae culture. Bioresour Technol 170:1–9. https://doi.org/10.1016/j.biortech.2014.07.088
Pawlowski A, Fernández I, Guzmán JL et al (2014) Event-based predictive control of pH in tubular photobioreactors. Comput Chem Eng 65:28–39. https://doi.org/10.1016/j.compchemeng.2014.03.001
Kosourov S, Seibert M, Ghirardi ML (2003) Effects of extracellular pH on the metabolic pathways in sulfur-deprived H2-producting Chlamydomonas reinhardtii cultures. Plant Cell Physiol 44:146–155
Sánchez JF, Fernández JM, Acién FG et al (2008) Influence of culture conditions on the productivity and lutein content of the new strain Scenedesmus almeriensis. Process Biochem 43:398–405. https://doi.org/10.1016/j.procbio.2008.01.004
Kassim MA, Meng TK (2017) Carbon dioxide (CO2) biofixation by microalgae and its potential for biorefinery and biofuel production. Sci Total Environ 584–585:1121–1129. https://doi.org/10.1016/j.scitotenv.2017.01.172
Acknowledgements
The authors would like to thank CAPES (Coordination for the Improvement of Higher Education Personnel) for their support with the Sandwich Doctorate Scholarship Abroad (PDSE) under the process Number: 88881.131625/2016-01, the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreement No. 727874 SABANA. Besides, G.M. Rosa would like to thank the postdoctoral fellowship from CNPq (process number 15297/2018-1).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Moraes, L., Rosa, G.M., Cara, I.M. et al. Bioprocess strategies for enhancing the outdoor production of Nannochloropsis gaditana: an evaluation of the effects of pH on culture performance in tubular photobioreactors. Bioprocess Biosyst Eng 43, 1823–1832 (2020). https://doi.org/10.1007/s00449-020-02373-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00449-020-02373-x