Abstract
pET expression plasmids are widely used for producing recombinant proteins in Escherichia coli. Selection and maintenance of cells harboring a pET plasmid are possible using either a Tn3.1-type genetic fragment (which encodes a ß-lactamase and confers resistance to ß-lactam antibiotics) or a Tn903.1-type genetic fragment (which encodes an aminoglycoside-3’-phosphotransferase and confers resistance aminoglycoside antibiotics). Herein we have investigated how efficiently pET plasmids are maintained using these two fragments. The study reveals that pET plasmids are efficiently maintained with both Tn3.1 and Tn903.1 genetic fragments prior to the induction of recombinant protein production, and over short induction times (i.e., 2 h). However, over longer induction times (i.e., 20 h), the efficiency of plasmid maintenance depends on the host strain used, and the type of antibiotic selection cassette used. Based on our collective observations, we have 2 general tips for efficiently maintaining pET plasmids during recombinant production experiments.
-
Tip #1: Use a strain with lowered levels of the T7 RNA polymerase, such as C41(DE3). pET plasmids will be efficiently maintained over long induction times with both the Tn3.1 and Tn903.1 genetic fragments, regardless of whether antibiotics are present during cultivation.
-
Tip #2: If a strain with higher levels of T7 RNA polymerase strain is necessary, such as BL21(DE3)), keep induction times short or use a plasmid containing a Tn903.1-type fragment and select with kanamycin.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
pET plasmids are popular in both academia and industry for recombinant protein production (Heyde and Nørholm 2021; Rosano et al. 2019; Rosano and Ceccarelli 2014; Shilling et al. 2020). They contain φ10 promoter (T7p) and terminator (T7t), which are recognized by a phage-derived T7 RNA polymerase in the host strain. Recombinant coding sequences cloned downstream of T7p are therefore transcribed by the T7 RNA polymerase and translated by the host cell ribosomes. As the T7 RNA polymerase is orthogonal and approximately five times faster than the E. coli RNA polymerase (Chamberlin and Ring 1973; Golomb and Chamberlin 1974), large amounts of recombinant RNA are generated in a short period of time (Studier et al. 1990), and the recombinant protein can constitute up to 50% of the cells protein content (Mierendorf et al. 1998).
The first-generation pET plasmids (pET1–pET5) were developed using a pBR322 backbone, which contained a Tn3.1 fragment harboring the coding sequence for ß-lactamase (bla) (Rosenberg et al. 1987). These plasmids could therefore be selected and maintained using ampicillin and other ß-lactam antibiotics (Bolivar et al. 1977; Sutcliffe 1979). In the later generation pET9 expression plasmid, the Tn3.1 fragment was replaced by a Tn903.1 transposon from Streptomyces kanamyceticus, which contains the coding sequence for the aminoglycoside-3’-phosphotransferase type Ia enzyme (aph) (Oka et al. 1981; Studier et al. 1990; Umezawa 1979). Selection and maintenance of cells harboring this plasmid were therefore possible using kanamycin or other aminoglycoside antibiotics. When the early-generation pET plasmids were subsequently expanded by commercial vendors, Tn3.1 and Tn903.1 fragments acquired some nucleotide mutations, but the basic architecture remained essentially unchanged. Currently, there are 55 pET expression plasmids containing a Tn3.1-based fragment (Cumming et al. 2022), and 21 containing a Tn903.1-based fragment (Table 1).
In this study, we have investigated whether pET expression plasmids using the Tn3.1 and Tn903.1 fragments are efficiently maintained in cells, or whether the cultures become over-run with plasmid-less cells when these fragments are used. Previous work has indicated that they are maintained well in some experiments but not in others (Baheri et al. 2001; Cumming et al. 2022; Dumon-Seignovert et al. 2004; Pan and Malcolm 2000; Sieben et al. 2016). However, a clear picture is conspicuously absent from the literature as the aforementioned studies have not addressed the question in a broad sense. Herein we have therefore looked at the efficiency of plasmid maintenance for two of the most commonly used pET expression plasmids (pET28a, pET15b), using both the Tn3.1-type and the Tn903.1-type fragments, in two of the most commonly used strains (BL21(DE3), C41(DE3)). We have done this both with and without antibiotic selection, using two common induction conditions (0.5 mM IPTG for 2 or 20 h).
Materials and methods
Database searching
Nucleotide sequences of Tn903.1 and Tn3.1 fragments in commercially available pET expression plasmids were obtained from Addgene (https://www.addgene.org) and are shown in Table 1. Alignments were performed using the nucleotide BLAST (nBLAST) service from the National Center for Biotechnology Information (https://blast.ncbi.nlm.nih.gov/Blast.cgi), using the Tn903.1 fragment from the pET9 plasmid (Studier et al. 1990) and Tn3.1 fragment from pET3 (Rosenberg et al. 1987) as the reference.
Molecular cloning
Construction of pET28a-sfGFP (Tn903.1), pET28a-Mth1 (Tn903.1), pET15b-sfGFP (Tn3.1), and pET15b-Mth1 (Tn3.1) was described in (Shilling et al. 2020). Construction of the pET28a-sfGFP (Tn3.1) as well as pET15b-sfGFP (Tn903.1) was done by (1) PCR amplification of the pET15b-sfGFP and pET28a-sfGFP backbones using forward and reverse primers annealing on either side of the antibiotic resistance fragments in order to create a plasmid backbone absent of the cassette. The PCR cycle used was composed of 30 cycles of 95 °C for 30 s, 49 °C for 30 s, 72 °C for 360 s. (2) The Tn903.1 and Tn3.1 fragments were PCR-amplified from pET28a-sfGFP (Tn903.1) and pET15b-sfGFP (Tn3.1) using forward and reverse primers annealing on either side of the fragment and containing an overhang region. The PCR cycle was composed of 30 cycles of 95 °C for 30 s, 46 °C for 30 s, 72 °C for 120 s. The subsequent PCR product was purified via in-gel extraction and introduced to MC1061 cells for in vivo assembly (Watson and García-Nafría, 2019).
All polymerase chain reactions were carried out with Q5 DNA polymerase (New England Biolabs, USA). All primers are described in (Supplementary information, Table S1). DNA sequencing and oligonucleotide synthesis were performed by Eurofins Scientific (Eurofins Genomics, Germany).
Plasmid selection and maintenance
To assess transformation efficiency, 50 ng of each plasmid was transformed into a 50 μL aliquot of chemically competent BL21(DE3) cells (B F− ompT gal dcm lon hsdSB (rB−mB−) λ(DE3 [lacI lac UV5-T7p07 ind1 sam7 nin5]) using a standard heat shock protocol. An aliquot of the cells was plated on LB agar, the appropriate antibiotic at the appropriate concentration (Tn903.1 at 50 μg/mL kanamycin, Tn3.1 at 100 μg/mL ampicillin). Images were taken using the upper white light in a GenoPlex (VWR International), and the number of colonies was counted using the OpenCFU software (Geissmann 2013).
To assess plasmid maintenance, a single colony of BL21(DE3), or the derivative strain C41(DE3) (Miroux and Walker 1996), containing a pET expression plasmid was grown in 5 mL of LB media for 16–20 h at 37 °C with agitation at 185 rpm in a 24-well plate. The cultures were back-diluted 1:100 in 5 mL LB media and grown to an OD600 of approximately 0.5. In certain experiments, antibiotics were omitted, otherwise the appropriate antibiotic was included at the appropriate concentration (see above). The cells were either induced with 0.5 mM IPTG, or simply cultured, then plated out on LB agar with the appropriate antibiotic at the appropriate concentration at designated times points. Images were taken using the upper white light in a GenoPlex (VWR International), and the number of colonies were counted using the OpenCFU software (Geissmann 2013).
Minimum inhibitory concentration
A single colony of BL21(DE3) was inoculated into 5 ml of LB media with 50 μg/mL of kanamycin (Tn903.1) and incubated overnight at 37 °C with agitation at 185 rpm. The cultures were back-diluted 1:100 the following morning in fresh LB media with kanamycin in a 5 mL 24-well plate and grown to an OD600 between 0.3 and 0.6. The cultures were then serially diluted and 100 μL was plated onto LB agar plates with varied concentrations of kanamycin. Images were taken using the upper white light in a GenoPlex (VWR International), and the number of colonies were counted using the OpenCFU software (Geissmann 2013).
Protein expression
A single colony of BL21(DE3) containing a pET expression plasmid was grown in 5 mL of LB media with the appropriate antibiotic at the appropriate concentration (see sub-section entitled ‘Plasmid selection and maintenance’) for 16–20 h at 37 °C with agitation at 185 rpm in a 5 mL 24-well plate. On the following day, the cultures were back-diluted 1:100 in 5 mL LB media with the same concentrations of antibiotic in a 5 mL 24-well plate. Growth was followed by taking 200 μL of cell culture into a 96-well plate (Thermo Scientific) and measuring absorbance at 600 nm (OD600) in a Spectramax M2e (Molecular Devices). Cells were induced with 0.5 mM IPTG at an OD600 between 0.3 and 0.6 and incubated for an additional 20 h at 37 °C with agitation at 185 rpm.
sfGFP fluorescence measurements
Fluorescence measurements were carried out as described previously (Daley et al. 2005). In short, 1 mL of the culture was pelleted at 13,000 × g for 1 min, and the cells were re-suspended in 200 μL of buffer (50 mM Tris–HCl, pH 8, 200 mM NaCl, 15 mM EDTA) and incubated at room temperature for 2 h. The cell suspension was then transferred to a 96-well optical bottom black-wall plate (Thermo Scientific), and the fluorescence was measured at excitation/emission wavelengths of 485/513 nm in a SpectraMax Gemini (Molecular Devices). Fluorescence was normalized against OD600.
SDS-PAGE and Western blotting
SDS-PAGE was performed with a Tris–glycine 12% acrylamide gel, cast to a thickness of 1 mm and run using the Hoefer SE160 Mighty Small II Deluxe Mini Vertical Protein Electrophoresis Unit at 100 V for 3 h. For Western blotting, proteins were transferred into a nitrocellulose membrane using the semi-dry Trans-Blot SD cell (Bio-Rad) at 15 V for 1 h. The membrane was incubated in 5% (w/v) non-fat milk (PanReac AppliChem) in Tris-buffered saline (TBS) (50 mM Tris, pH 7.4, 200 mM NaCl) for either 1 h or overnight. Recombinant proteins bearing a His-tag were probed using a 1: 1000 diluted HisProbe–HRP conjugate (15,165, Thermo Scientific), and the SuperSignal West Pico PLUS chemiluminescence substrate was used as a substrate. Images were visualized on an Azure c600 Imaging System (Azure Biosystems).
Kanamycin activity assay
BL21(DE3) cells harboring pET15-sfGFP (Tn3.1) or pET28a-sfGFP (Tn903.1) were inoculated into LB media supplemented with the appropriate antibiotic at the appropriate concentration (see sub-section entitled ‘Plasmid selection and maintenance’) for 16–20 h at 37 °C with agitation at 185 rpm. To collect the spent media, a 5 mL aliquot of BL21(DE3) harboring pET28a-sfGFP (Tn903.1) was pelleted by centrifugation at 4 000 xg for 10 min, then sterile-filtered through a 0.2 µm filter (Whatman) and supplemented with 10% (w/v) glucose. BL21(DE3) harboring pET15b-sfGFP (Tn3.1) were diluted 1:100 into the spent media that had been supplemented with 100 µg/mL ampicillin. Separately, cultures of BL21(DE3) harboring pET15b-sfGFP were also inoculated 1:100 into fresh LB media with 100 µg/mL ampicillin. Growth was monitored by measuring the OD600 each hour for five hours in a 96-well SpectraMax m2e plate reader (Molecular Devices).
Results
Maintenance of pET plasmids in BL21(DE3)
pET28a and pET15b are two of the most popular pET expression plasmids (Shilling et al. 2020). pET28a contains a Tn903.1 fragment that enables selection and maintenance of cells carrying the plasmid using kanamycin (Fig. 1A, left panel). pET15b is similar, except that it lacks a C-terminal T7-His6 tag and the F1 ori and contains a Tn3.1 fragment that confers resistance to ß-lactam antibiotics (Fig. 1A, right panel). Initially, we compared the transformation efficiency of pET28a-sfGFP (Tn903.1) and pET15b-sfGFP (Tn3.1) by transforming 50 ng of each plasmid into the BL21(DE3) strain and plating on the appropriate antibiotic. Colony counting indicated that plasmid transformation worked equally when both expression plasmids were used (Supplementary information Figure S1). To assess how efficiently cells maintained the two expression plasmids, colonies were inoculated into LB media (with the appropriate antibiotic) and cultivated at 37 °C. Aliquots were taken after 4 and 22 h of cultivation and plated on LB agar. This enabled an assessment of the proportion of viable cells that were resistant to the antibiotic (hereafter referred to as plasmid maintenance; Fig. 1B). BL21(DE3) maintained both plasmids with approximately 100% efficiency after 22 h of cultivation in the presence of antibiotics in the culture media (Fig. 1C).
When the experiment was repeated and recombinant sfGFP production was induced at mid exponential phase (2 h after back-dilution) with 0.5 mM IPTG for 2 h, we observed that approximately 100% of the cells still maintained both of the plasmids. However, after 20 h of induction (i.e., 22 h of cultivation), approximately 50% of BL21(DE3) cells had maintained pET28a-sfGFP (Tn903.1) and < 15% had maintained pET15b-sfGFP (Tn3.1) (Fig. 1D) (see also (Cumming et al. 2022)). A difference in the efficiency of plasmid maintenance was also observed when the coding sequence for the human cancer target Mth1 (Gad et al. 2014) was expressed from pET28a-Mth1 (Tn903.1) compared to pET15b-Mth1 (Tn3.1) for 20 h (Fig. 1E).
To eliminate the possibility that the differences in plasmid maintenance were caused by the pET15b and pET28a backbones rather than by the genetic fragments used for selection and maintenance, the Tn903.1 and Tn3.1 fragments were swapped, and plasmid maintenance was again assessed during production of recombinant sfGFP. Over a 20-h induction period (22 h of cultivation), approximately 2% of BL21(DE3) cells had maintained pET28a-sfGFP (Tn3.1) and 25% had maintained pET15b-sfGFP (Tn903.1) (Fig. 1F). The data presented indicate that during recombinant protein production experiments, pET plasmids are not efficiently maintained in BL21(DE3) cells. However, plasmids containing the Tn903.1 fragment (and selected on kanamycin) were maintained more efficiently in BL21(DE3) than those containing Tn3.1 (and selected on ampicillin).
Increased plasmid maintenance did not lead to increased protein production titers. When sfGFP and Mth1 yields were quantified by in cell fluorescence and Western blotting respectively, there were no major differences in protein yields between BL21(DE3) cells harboring pET expression plasmids with either the Tn903.1 fragment or the Tn3.1 fragment (Supplementary information Figure S2). This observation is most likely explained by the finding that, over long induction times, BL21(DE3) cells that maintain pET expression plasmids either down-regulate or shut-off the pET system via mutations because it is toxic to the cell (James et al. 2021; Kwon et al. 2015a; Schlegel et al. 2015).
Why are pET plasmids containing Tn903.1 (and selected on kanamycin) maintained more efficiently in BL21(DE3) during recombinant protein production experiments than those containing Tn3.1 (and selected on ampicillin)? We reason that this difference can be attributed to the half-life (t1/2) of the respective antibiotics. Previous work has demonstrated that ampicillin in the culture media is rapidly degraded by ß-lactamase (t1/2 approx. 6 min following back-dilution) (Cumming et al. 2022)). Cells that lose a pET plasmid containing the Tn3.1 fragment are therefore not selected against after approx. 70 min (following back-dilution)(Cumming et al. 2022). These cells can subsequently dominate the culture because they are freed from the metabolic burden of plasmid maintenance and recombinant protein production, which gives them a growth advantage. In contrast, kanamycin is active in spent media after + 20 h of culturing (i.e., it can select against cells without a plasmid) (Supplementary information Figure S3). Cells that lose a pET plasmid containing the Tn903.1 fragment are therefore selected against and cannot dominate the culture, even though they are freed from the metabolic burden of recombinant protein production and have a growth advantage. It is worth noting however, that approx. 50–75% of cells in the culture did not survive when re-plated on 50 ug /mL kanamycin. Possible reasons for this are discussed below.
The importance of antibiotic selection for plasmid maintenance is well established. However, many pET users do not have the luxury of using antibiotics during production experiments (i.e., in industrial settings where antibiotic residues and metabolites are unwanted). We repeated key experiments in the absence of antibiotics and observed that pET28a-sfGFP (Tn903.1) and pET15b-sfGFP (Tn3.1) were maintained with approximately 100% efficiency in BL21(DE3) over a 20-h period. However, when recombinant protein production was induced for 20 h (22 h of culturing), < 10% of the cells in the cultures maintained the plasmid (Supplementary information Figure S4). This observation further emphasizes the importance of selection during recombinant protein production.
In summary, these data indicate that pET plasmids harboring both Tn903.1 and Tn3.1 fragments are efficiently maintained over short induction times in BL21(DE3). Over longer induction times, the cultures become overgrown with cells lacking plasmid. Nevertheless, the Tn903.1 fragment is more efficient than the Tn3.1 fragment at maintaining cells with plasmid, because kanamycin persists in the culture media, whereas ampicillin is rapidly degraded (Cumming et al. 2022; Korpimäki et al. 2003). Finally, increased plasmid maintenance did not result in higher production titers.
Maintenance of pET plasmids in C41(DE3)
A large body of work has suggested that the burden of recombinant protein production contributes to poor plasmid maintenance (Bentley et al. 1990; Dumon-Seignovert et al. 2004; Pan and Malcolm 2000; Popov et al. 2009; Silva et al. 2012). We too observed this when we induced sfGFP and Mth1 in BL21(DE3) for + 20 h (both with and without antibiotics) (see above). We investigated whether we could increase the efficiency of plasmid maintenance in these induction conditions by reducing the burden of recombinant protein production. In this set of experiments, we switched to the C41(DE3) strain (Miroux and Walker 1996), which has lowered levels of the T7 RNA polymerase and a lower protein production rate (Kwon et al. 2015). pET28a-sfGFP (Tn903.1) and pET15b-sfGFP (Tn3.1) were transformed into C41(DE3), and sfGFP production was again induced with 0.5 mM IPTG for 20 h (22 h of cultivation). Fluorescence readings indicated that the expression levels of sfGFP in C41(DE3) were > 4 times lower than that those observed in BL21(DE3) (Supplementary information Figure S5). Both pET28a-sfGFP (Tn903.1) and pET15b-sfGFP (Tn3.1) were efficiently maintained with approximately 100% efficiency in the C41(DE3) strain during recombinant protein production experiments when antibiotics were present in the culture media (Fig. 2A). We repeated the above experiment in the absence of antibiotics in the culture media and were surprised to observe that pET28a-sfGFP (Tn903.1) and pET15b-sfGFP (Tn3.1) were still maintained with approximately 100% efficiency in C41(DE3) over a 20-h induction (Fig. 2B). Taken together, these data indicate that over long inductions, the C41(DE3) strain maintains pET plasmids efficiently, irrespective of the resistance fragment used (Tn903.1 and Tn3.1), or the presence or absence of antibiotics.
Discussion
The Tn3.1-based and Tn903.1-based fragments are essential components of pET expression plasmids. They confer resistance to antibiotics and enable selection of bacterial cells with a plasmid following transformation (by plating on the appropriate antibiotic). They also enable maintenance of the plasmid during long cultivations (by including the appropriate antibiotic in the growth media). In this study, we have investigated how efficiently pET plasmids are maintained when using these fragments.
Initially, we used the most common pET resources and protocols, such as the pET28a and pET15b expression plasmids, the BL21(DE3) strain, and standard media/induction protocols (Aguilar Lucero et al. 2021; Novagen 2005; Rosano et al. 2019; Shilling et al. 2020; Structural Genomics Consortium et al. 2008). We then monitored plasmid maintenance by plating the cells with and without antibiotics. This allowed us to determine the percentage of cells in the culture that were resistant to a given antibiotic (a proxy for plasmid maintenance). The data indicated that, prior to induction of recombinant protein production, most cells contained a pET plasmid for long cultivation times (i.e., 22 h). This observation was irrespective of whether or not antibiotics were present in the culture media (a phenomenon known as the plasmid paradox (Carroll and Wong 2018)). However, when recombinant protein production was induced, most BL21(DE3) cells contained a pET plasmid for short cultivation times (i.e., 2 h post induction) but not over longer cultivation times (i.e., 20 h post induction). In these conditions, we observed that pET expression plasmids containing Tn903.1 (and selected with kanamycin) were more efficiently maintained in BL21(DE3) than those containing Tn3.1 (and selected with ampicillin).
Why are plasmids containing Tn903.1 (and selected with kanamycin) more efficiently maintained in BL21(DE3) than those containing Tn3.1 (and selected with ampicillin)? Decades old literature has indicated that pBR322-based plasmids (which the pET plasmids are derived from) are randomly segregated to daughter cells during cell division (Chiang and Bremer 1988). As the principle of random segregation also implies, daughters can receive unequal amounts of the plasmid pool at each division. Chiang and Bremer estimated that 1:10,000 divisions would yield a cell without a plasmid (Chiang and Bremer 1988). Thus, over the course of a 24-h incubation, plasmid-less cells would accumulate and could represent a small proportion of the total population (Fig. 3A). However, in the context of a protein production experiment, the plasmid-less cells would be freed from the metabolic burdens of both plasmid replication and plasmid-related protein production, and have a significant growth advantage. Plasmid-less cells would eventually outgrow their plasmid-containing counterparts in the population during a long induction. It is therefore important to select against plasmid-less cells during recombinant protein production experiment, by including antibiotics in the growth media. The scenario above stated explains why plasmids containing Tn3.1 (and selected with ampicillin) are less efficiently maintained in BL21(DE3) than those containing Tn903.1 (and selected with kanamycin). Ampicillin is short-lived in the culture media while kanamycin is long-lasting. Thus, BL21(DE3) cells that lose a plasmid containing Tn3.1 are not selected against and can outgrow those that maintain a plasmid (Fig. 3B). In contrast, BL21(DE3) cells that lose a plasmid containing Tn903.1 are selected against. All said, it is worth noting that even though kanamycin was still active in the culture media (i.e., above the MIC90 of BL21(DE3)), we did not observe 100% plasmid maintenance (Fig. 3C). The reasons why some plasmid-less cells can accumulate in the culture are not fully understood at this point in time. It may relate to the fact that a population of cells can survive in the spent culture media through community protection.
pET expression plasmids are typically chosen based on salient features, such as purification, detection or secretion tags rather than on the antibiotic resistance cassette. One notable exception is when producing recombinant membrane or secreted proteins, where preference is given to the Tn903.1 fragment, as the Tn3.1 fragment encodes for the periplasmic ß-lactamase that needs the same machinery as the recombinant protein for its biogenesis (Kaderabkova et al. 2022). In contrast, the aminoglycoside-3’-phosphotransferase encoded by Tn903.1 is cytosolic and doesn’t compete with the recombinant protein for the secretion machinery. The data presented here suggest that more consideration should be given to the choice of antibiotic resistance fragment when choosing a pET expression plasmid, as the Tn3.1- and Tn903.1-type fragments perform differently and need to be matched with the production experiment. Specifically, BL21(DE3) maintained pET plasmids with a Tn903.1-type fragment more efficiently than those containing a Tn3.1-type fragment when the appropriate antibiotic was present in the culture media. Even though better plasmid maintenance was observed when using a Tn903.1-type fragment, we did not observe increased production titers. This can be attributed to the fact that, in BL21(DE3), the T7 system is either down-regulated or shut-off by mutations over long induction times (James et al. 2021; Kwon et al. 2015; Schlegel et al. 2015).
If poor plasmid maintenance is not acceptable, one solution identified in this study is to switch strain background. When we used C41 (DE3), we observed that the plasmid maintenance was unaffected by induction of recombinant protein production, culturing times, presence or absence of antibiotics, and resistance fragments chosen (Fig. 3D and E). The reason why C41(DE3) was able to better maintain plasmids compared to BL21(DE3) is because it has lower levels of the T7 RNA polymerase, and thus recombinant protein production places a lower metabolic burden on the cell. As a consequence, plasmid-less C41(DE3) do not outgrow the plasmid-containing cells during long inductions. One caveat to consider, is that it may be possible to place a metabolic load on C41(DE3) and enable plasmid-less cells to take over the culture, if the recombinant protein is particularly toxic to the cell, or if the pET plasmid lacks genetic modules that help regulate inducible expression (Dumon-Seignovert et al. 2004). Efficient plasmid maintenance does come at a cost, as we observed that titers of recombinant sfGFP were > 4 times lower in C41(DE3) than they were in BL21(DE3) after 20 h of induction. These observations highlight the conundrum. It is not possible to choose a strain which efficiently maintains the expression plasmid and produces high titers.
A large body of work has investigated factors that contribute to plasmid maintenance. This body of work has been carried out using a variety of different plasmids, cell strains, recombinant proteins, antibiotic resistance fragments and culturing conditions. The knowledge is not immediately transferable to the pET system, which is the gold standard for recombinant protein production (Heyde and Nørholm 2021; Rosano et al. 2019; Rosano and Ceccarelli 2014; Shilling et al. 2020). In this study, we have addressed this knowledge gap by investigating how efficiently pET plasmids are maintained using the Tn3.1-type and Tn903.1-type fragments. The study identified factors that contribute to both efficient and poor maintenance. Based on this work, we have two simple tips for efficiently maintaining pET expression plasmids:
-
#1: Use a strain with lowered levels of the T7 RNA polymerase, such as C41(DE3). pET plasmids will be efficiently maintained over long induction times with both the Tn3.1 and Tn903.1 genetic fragments, regardless of whether antibiotics are present during cultivation. This strategy will most likely lower the overall titers of recombinant protein but it will also allow you to work in the absence of antibiotic selection while ensuring high levels of plasmid maintenance. This is particularly relevant to industrial fermentations where antibiotic residues and metabolites are problematic.
-
Tip #2: If a strain with higher levels of T7 RNA polymerase strain is necessary, such as BL21(DE3)), keep induction times short or use a plasmid containing a Tn903.1-type fragment and select with kanamycin. Keeping inductions short will also help to avoid mutations that either down-regulate or shut-off the T7 RNA polymerase (James et al. 2021; Kwon et al. 2015a; Schlegel et al. 2015).
Data availability
All primary data and materials are available from the authors upon request.
Abbreviations
- LB:
-
Lysogeny broth
- sfGFP:
-
Superfolder green fluorescent protein
- OD600 :
-
Optical density at 600 nm
- PCR:
-
Polymerase chain reaction
- IPTG:
-
Isopropyl-ß-D-1-thiogalactopyranoside
References
Aguilar Lucero, D., Cantoia, A., Ceccarelli, E.A., Rosano, G.L., 2021. Starting a new recombinant protein production project in Escherichia coli, in: Methods in Enzymology. Elsevier, pp. 3–18.
Baheri HR, Hill GA, Roesler WJ (2001) Modelling plasmid instability in batch and continuous fermentors. Biochem Eng J 8:45–50
Bentley WE, Mirjalili N, Andersen DC, Davis RH, Kompala DS (1990) Plasmid-encoded protein: The principal factor in the “metabolic burden” associated with recombinant bacteria. Biotechnol Bioeng 35:668–681
Bolivar F, Rodriguez RL, Betlach MC, Boyer HW (1977) Construction and characterization of new cloning vehicles. I. Ampicillin-resistant derivatives of the plasmid pMB9. Gene 2:75–93
Carroll AC, Wong A (2018) Plasmid persistence: costs, benefits, and the plasmid paradox. Can J Microbiol 64:293–304
Chamberlin M, Ring J (1973) Characterization of T7-specific ribonucleic acid polymerase. 1. General properties of the enzymatic reaction and the template specificity of the enzyme. J Biol Chem 248:2235–2244
Chiang C-S, Bremer H (1988) Stability of pBR322-derived plasmids. Plasmid 20:207–220
Cumming AJ, Khananisho D, Harris R, Bayer CN, Nørholm MHH, Jamshidi S, Ilag LL, Daley DO (2022) Antibiotic-efficient genetic cassette for the TEM-1 β-lactamase that improves plasmid performance. ACS Synth Biol 11:241–253
Daley DO, Rapp M, Granseth E, Melén K, Drew D, von Heijne G (2005) Global topology analysis of the Escherichia coli inner membrane proteome. Science 308:1321–1323
Dumon-Seignovert L, Cariot G, Vuillard L (2004) The toxicity of recombinant proteins in Escherichia coli: a comparison of overexpression in BL21(DE3), C41(DE3), and C43(DE3). Protein Expr Purif 37:203–206
Gad H, Koolmeister T, Jemth A-S, Eshtad S, Jacques SA, Ström CE, Svensson LM, Schultz N, Lundbäck T, Einarsdottir BO, Saleh A, Göktürk C, Baranczewski P, Svensson R, Berntsson RP-A, Gustafsson R, Strömberg K, Sanjiv K, Jacques-Cordonnier M-C, Desroses M, Gustavsson A-L, Olofsson R, Johansson F, Homan EJ, Loseva O, Bräutigam L, Johansson L, Höglund A, Hagenkort A, Pham T, Altun M, Gaugaz FZ, Vikingsson S, Evers B, Henriksson M, Vallin KSA, Wallner OA, Hammarström LGJ, Wiita E, Almlöf I, Kalderén C, Axelsson H, Djureinovic T, Puigvert JC, Häggblad M, Jeppsson F, Martens U, Lundin C, Lundgren B, Granelli I, Jensen AJ, Artursson P, Nilsson JA, Stenmark P, Scobie M, Berglund UW, Helleday T (2014) MTH1 inhibition eradicates cancer by preventing sanitation of the dNTP pool. Nature 508:215–221
Geissmann Q (2013) OpenCFU, a New free and open-source software to count cell colonies and other circular objects. PLoS ONE 8:e54072
Golomb M, Chamberlin M (1974) Characterization of T7-specific ribonucleic acid polymerase. IV. Resolution of the major in vitro transcripts by gel electrophoresis. J Biol Chem 249:2858–2863
Heyde SAH, Nørholm MHH (2021) Tailoring the evolution of BL21(DE3) uncovers a key role for RNA stability in gene expression toxicity. Commun Biol 4:963
James J, Yarnall B, Koranteng A, Gibson J, Rahman T, Doyle DA (2021) Protein over-expression in Escherichia coli triggers adaptation analogous to antimicrobial resistance. Microb Cell Fact 20:13
Kaderabkova N, Bharathwaj M, Furniss, RCD, Gonzalez D, Palmer T, Mavridou DAI, (2022) The biogenesis of β-lactamase enzymes. Microbiology 168.
Korpimäki T, Kurittu J, Karp M (2003) Surprisingly fast disappearance of beta-lactam selection pressure in cultivation as detected with novel biosensing approaches. J Microbiol Methods 53:37–42
Kwon S-K, Kim SK, Lee D-H, Kim JF (2015) Comparative genomics and experimental evolution of Escherichia coli BL21(DE3) strains reveal the landscape of toxicity escape from membrane protein overproduction. Sci Rep 5:16076
Mierendorf RC, Morris BB, Hammer B, Novy RE (1998) Expression and purification of recombinant proteins using the pET system. Methods Mol Med 13:257–292
Miroux B, Walker JE (1996) Over-production of proteins in Escherichia coli: mutant hosts that allow synthesis of some membrane proteins and globular proteins at high levels. J Mol Biol 260:289–298
Novagen, 2005. pET System Manual 11th Edition.
Oka A, Sugisaki H, Takanami M (1981) Nucleotide sequence of the kanamycin resistance transposon Tn903. J Mol Biol 147:217–226
Pan S, Malcolm BA (2000) Reduced background expression and improved plasmid stability with pET vectors in BL21 (DE3). Biotechniques 29:1234–1238
Popov M, Petrov S, Kirilov K, Nacheva G, Ivanov I (2009) Segregational Instability in E. Coli of expression plasmids carrying human interferon gamma gene and its 3’-End truncated variants. Biotechnol Biotechnol Equip 23:840–843
Rosano GL, Morales ES, Ceccarelli EA (2019) New tools for recombinant protein production in Escherichia coli: A 5-year update. Protein Sci 28:1412–1422
Rosano GL, Ceccarelli EA, (2014) Recombinant protein expression in Escherichia coli: advances and challenges. Front Microbiol 5.
Rosenberg AH, Lade BN, Dao-shan C, Lin S-W, Dunn JJ, Studier FW (1987) Vectors for selective expression of cloned DNAs by T7 RNA polymerase. Gene 56:125–135
Schlegel S, Genevaux P, de Gier J-W (2015) De-convoluting the genetic adaptations of E. coli C41(DE3) in real time reveals how alleviating protein production stress improves yields. Cell Rep 10:1758–1766
Shilling PJ, Mirzadeh K, Cumming AJ, Widesheim M, Köck Z, Daley DO (2020) Improved designs for pET expression plasmids increase protein production yield in Escherichia coli. Communications Biology 3:214
Sieben M, Steinhorn G, Müller C, Fuchs S, Ann Chin L, Regestein L, Büchs J (2016) Testing plasmid stability of Escherichia coli using the Continuously Operated Shaken BIOreactor System. Biotechnol Prog 32:1418–1425
Silva F, Queiroz JA, Domingues FC (2012) Evaluating metabolic stress and plasmid stability in plasmid DNA production by Escherichia coli. Biotechnol Adv 30:691–708
Structural Genomics Consortium, Architecture et Fonction des Macromolécules Biologiques, Berkeley Structural Genomics Center, China Structural Genomics Consortium, Integrated Center for Structure and Function Innovation, Israel Structural Proteomics Center, Joint Center for Structural Genomics, Midwest Center for Structural Genomics, New York Structural GenomiX Research Center for Structural Genomics, Northeast Structural Genomics Consortium, Oxford Protein Production Facility, Protein Sample Production Facility, Max Delbrück Center for Molecular Medicine, RIKEN Structural Genomics/Proteomics Initiative, SPINE2-Complexes, 2008. Protein production and purification. Nat Methods 5, 135–146
Studier WF, Rosenberg, AH, Dunn JJ, Dubendorff JW, 1990. Use of T7 RNA polymerase to direct expression of cloned genes, in: Methods in Enzymology. Elsevier, pp. 60–89.
Studier FW, Moffatt BA (1986) Use of bacteriophage T7 RNA polymerase to direct selective high-level expression of cloned genes. J Mol Biol 189:113–130
Sutcliffe JG (1979) Complete nucleotide sequence of the Escherichia coli plasmid pBR322. Cold Spring Harb Symp Quant Biol 43:77–90
Umezawa H (1979) Studies on aminoglycoside antibiotics: enzymic mechanism of resistance and genetics. Jpn J Antibiot 32(Suppl):S1-14
Watson JF, García-Nafría J (2019) In vivo DNA assembly using common laboratory bacteria: A re-emerging tool to simplify molecular cloning. J Biol Chem 294:15271–15281
Acknowledgements
We would like to thank Sokeina Al Obeidi and Tiago Dias for technical assistance.
Funding
Open access funding provided by Stockholm University. The work was supported by grants from Novo Nordisk Fonden (0071844) and Carl Trygger stiftelse (CTS 21:1637) to D.O.D.
Author information
Authors and Affiliations
Contributions
DiK, AJC and DOD conceived the study and designed the experiments. DiK, AJC and DaK acquired the data. All authors interpreted the data. PJS and DOD managed the project. DK, AJC and DOD wrote the manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no competing interests.
Ethical approval and consent to participate
Not applicable.
Additional information
Communicated by M. Polymenis.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Khananisho, D., Cumming, A.J., Kulakova, D. et al. Tips for efficiently maintaining pET expression plasmids. Curr Genet 69, 277–287 (2023). https://doi.org/10.1007/s00294-023-01276-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00294-023-01276-0