Abstract
Lipase biocatalysts offer unique properties which are often impaired by low thermal and methanol stability. In this study, the rational design was employed to engineer a disulfide bond in the protein structure of Geobacillus zalihae T1 lipase in order to improve its stability. The selection of targeted disulfide bond sites was based on analysis of protein spatial configuration and change of Gibbs free energy. Two mutation points (S2C and A384C) were generated to rigidify the N-terminal and C-terminal regions of T1 lipase. The results showed the mutant 2DC lipase improved methanol stability from 35 to 40% (v/v) after 30 min of pre-incubation. Enhancement in thermostability for the mutant 2DC lipase at 70 °C and 75 °C showed higher half-life at 70 °C and 75 °C for 30 min and 52 min, respectively. The mutant 2DC lipase maintained the same optimum temperature (70 °C) as T1 lipase, while thermally induced unfolding showed the mutant maintained higher rigidity. The kcat/Km values demonstrated a relatively small difference between the T1 lipase (WT) and 2DC lipase (mutant). The kcat/Km (s−1 mM−1) of the T1 and 2DC showed values of 13,043 ± 224 and 13,047 ± 312, respectively. X-ray diffraction of 2DC lipase crystal structure with a resolution of 2.04 Å revealed that the introduced single disulfide bond did not lower initial structural interactions within the residues. Enhanced methanol and thermal stability are suggested to be strongly related to the newly disulfide bridge formation and the enhanced compactness and rigidity of the mutant structure.
Key points
• Protein engineering via rational design revealed relative improved enzymatic performance.
• The presence of disulfide bond impacts on the rigidity and structural function of proteins.
• X-ray crystallography reveals structural changes accompanying protein modification.
Similar content being viewed by others
Data availability
The authors confirm that the datasets supporting the findings and conclusions of this study are available within the article and its supplementary materials file.
References
Alquéres SMC, Branco RV, Freire DMG, Alves TLM, Martins OB, and Almeida RV (2011) Characterization of the recombinant thermostable lipase (Pf2001) from pyrococcus furiosus: effects of thioredoxin fusion tag and triton X-100. Enzyme Res 2011(169393):1–7
Angkawidjaja C, You D, Matsumura H, Kuwahara K, Koga Y, Takano K, Kanaya S (2007) Crystal structure of a family I. 3 lipase from Pseudomonas sp. MIS38 in a closed conformation. FEBS Lett 581:5060–5064
Brzozowski AM, Derewenda U, Derewenda ZS, Dodson GG, Lawson DM, Turkenburg JP, Thim L (1973) A model for interfacial activation in lipases from the structure of a fungal lipase-inhibitor complex. Nature 246(5429):170
Bukhari N, Thean A, Leow C, Noor R, Raja Z, Rahman A (2020) Single residue substitution at N-terminal affects temperature stability and activity of L2 lipase. Molecules 25(3433):1–17
Carrasco-López C, Godoy C, de las Rivas B, Fernández-Lorente G, Palomo JM, Guisán JM, Hermoso JA (2009) Activation of bacterial thermo alkalophilic lipases is spurred by dramatic structural rearrangements. JBC 284(7):4365–4372
Charoenpanich J, Suktanarag S, Toobbucha N (2011) Production of a thermostable lipase by Aeromonas sp. EBB-1 isolated from marine sludge in Angsila. Thailand. Sci 37(2):105–114
Chen G, Khan IM, He W, Li Y, Jin P, Campanella OH, Miao M (2022) Rebuilding the lid region from conformational and dynamic features to engineering applications of lipase in foods: current status and future prospects. CRFSFS 21(3):2688–2714
Choi W, Hee M, Ro H, Ryeol S, Oh T, Lee J (2005) Zinc in lipase L1 from Geobacillus stearothermophilus L1 and structural implications on thermal stability. FEBS Lett 579:3461–3466
Clark DP, Pazdernik NJ, and McGehee MR (2019) Protein structure and function. In Mol Biol (pp. 445–483)
Creighton TE (1988) Disulphide bonds and protein stability. BioEssays 8(2–3):57–63
Dimitriou PS, Denesyuk AI, Nakayama T, Johnson MS, Denessiouk K (2018) Distinctive structural motifs co-ordinate the catalytic nucleophile and the residues of the oxyanion hole in the alpha/beta-hydrolase fold enzymes. Protein Sci 28(2):344–364
Douglas B, Craig Alan A, Dombkowski (2013) Disulfide by Design 2.0: a web-based tool for disulfide engineering in proteins. BMC Bioinform 14(1):346
Dror A, Kanteev M, Kagan I, Gihaz S, Shahar A, Fishman A (2015) Structural insights into methanol-stable variants of lipase T6 from Geobacillus stearothermophilus. Appl Microbiol Biotechnol 99(22):9449–9461
Ghosh PK, Saxena RK, Gupta R, Yadav RP, Davidson S (1996) Microbial lipases: production and applications. Sci Prog 79(Pt 2):119–157
Gihaz S, Bash Y, Rush I, Shahar A, Pazy Y, Fishman A (2020) Bridges to stability: engineering disulfide bonds towards enhanced lipase biodiesel synthesis. ChemCatChem 12(1):181–192
Golaki BP, Aminzadeh S, Karkhane AA, Yakhchali B, Farrokh P, Khaleghinejad SH, Mehrpooyan S (2015) Cloning, expression, purification, and characterization of lipase 3646 from thermophilic indigenous Cohnella sp. A01. Protein Expr Purif 109(October):120–126
Grimm C, Chari A, Reuter K, Fischer U (2010) A crystallization screen based on alternative polymeric precipitants. Acta Crystallogr d: Biol Crystallogr 66(6):685–697
Han ZL, Han SY, Zheng SP, Lin Y (2009) Enhancing thermostability of a Rhizomucor miehei lipase by engineering a disulfide bond and displaying on the yeast cell surface. Appl Microbiol Biotechnol 85(1):117–126
Hashizume Y, Inaka K, Furubayashi N, Kamo M (2020) Methods for obtaining better diffractive protein crystals : from sample evaluation to space crystallization. Cryst 10(78):1–21
Ishak SNH, Aris SNAM, Halim KBA, Ali MSM, Leow TC, Kamarudin NHA, Masomian M, Rahman RNZRA (2017) Molecular dynamic simulation of space and earth-grown crystal structures of thermostable T1 lipase geobacillus zalihae revealed a better structure. Mol 22(10):1574. https://doi.org/10.3390/molecules22101574
Jaeger KE, Dijkstra BW, Reetz MT (1999) Bacterial biocatalysts: molecular biology, three-dimensional structures, and biotechnological applications of lipases. Annu Rev Microbiol 53:315–351
Jo E, Kim J, Lee A, Moon K, Cha J (2021) Identification and characterization of a novel thermostable gdsl-type lipase from geobacillus thermocatenulatus. J Microbiol Biotechnol 31(3):483–491
Kawata T, Ogino H (2009) Enhancement of the organic solvent-stability of the LST-03 lipase by directed evolution. Biotechnol Prog 25(6):1605–1611
Khurana J, Singh R, Kaur J (2011) Engineering of Bacillus lipase by directed evolution for enhanced thermal stability: effect of isoleucine to threonine mutation at protein surface. Mol Biol Rep 38(5):2919–2926
Kim HK, Park SY, Lee JK, Oh TK (1998) Gene cloning and characterization of thermostable lipase from bacillus stearothermophilus L1. Biosci Biotechnol Biochem 62(1):66–71
Kong B, Guo GL (2014) Soluble expression of disulfide bond containing proteins FGF15 and FGF19 in the cytoplasm of Escherichia coli. PLoS ONE 9(1):1–8
Korman TP, Sahachartsiri B, Charbonneau DM, Huang GL, Beauregard M and Bowie JU (2013) Dieselzymes: development of a stable and methanol tolerant lipase for biodiesel production by directed evolution. Biotechnol Biofuels 6:70
Ktata A, Krayem N, Aloulou A, Bezzine S, Sayari A, Chamkha M, Karray A (2019) Purification, biochemical and molecular study of lipase producing from a newly thermoalkaliphilic Aeribacillus pallidus for oily wastewater treatment. J Infect Dis 220(4):89–99
Kumar A, Dhar K, Kanwar SS, Arora PK (2016) Lipase catalysis in organic solvents: advantages and applications. Biol Proced Online 18(1):1–11
Kwon DY, Rhee JS (1986) A simple and rapid colorimetric method for determination of free fatty acids for lipase assay. JAOCS 63(1):89–92
Kwon J, Cho H, Kim S, Ryu Y, Lee JJ (2021) A combination strategy of solubility enhancers for effective production of soluble and bioactive human enterokinase. J Biotechnol 340(August):57–63
Laskowski RA, Furnham N, and Thornton JM (2012) The Ramachandran plot and protein structure validation. Biomol Forms Funct. IISc Press -WSPC Publication: 62–75
Latip W, Noor R, Raja Z, Rahman A, Thean A, Leow C, Shariff FM and Ali MSM (2016) Expression and characterization of thermotolerant lipase with broad pH profiles isolated from an Antarctic Pseudomonas sp strain AMS3. PeerJ 2420:1–20
Leow TC, Noor R, Raja Z, Rahman A, Salleh AB, Basri M (2007) High-temperature crystallization of thermostable T1 lipase. Cryst Growth Des 7(2):406–410
Leow TC, Rahman RNZRA, Basri M, Salleh AB (2007) A thermoalkaliphilic lipase of Geobacillus sp. T1. Extremophiles 11(3):527–535
Li C, Ban X, Zhang Y, Gu Z, Hong Y, Cheng L, Li Z (2020) Rational design of disulfide bonds for enhancing the thermostability of the 1,4-α-glucan branching enzyme from Geobacillus thermoglucosidans STB02. J Agric Food Chem 68(47):13791–13797
Li C, Zhao J, Zhang Z, Jiang Y, Bilal M, Jiang Y, Cui J (2020) Self-assembly of activated lipase hybrid nanoflowers with superior activity and enhanced stability. Biochem Eng J 158(March):107582
Liu Q, Xun G, Feng Y (2019) The state-of-the-art strategies of protein engineering for enzyme stabilization. Biotechnol Adv 37(4):530–537
Liu ZQ, Yang PC (2012) Construction of pET-32 α (+) vector for protein expression and purification. N Am J Med Sci 4(12):651–655
Maiangwa J, Shukuri M, Ali M, Salleh AB, Noor R, Raja Z, Normi YM, Shariff FM and Leow TC (2017) Lid opening and conformational stability of T1 Lipase is mediated by increasing chain length polar solvents. PeerJ 5:e3341
Marinelli P, Navarro S, Bano-Polo M, Morel B, Grana-Montes R, Sabe A, Ventura S (2018) Global protein stabilization does not suffice to prevent amyloid fibril formation. ACS Chem Biol 13(8):2094–2105
Matsumura H, Yamamoto T, Thean CL, Mori T, Salleh AB, Basri M, Rahman RNZRA (2007) Novel cation pi interaction revealed by crystal structure of thrmoalkalophilic lipase. Proteins 5(2):592–598
Melani NB, Tambourgi EB, Silveira E (2020) Lipases: from production to applications. Sep Purif Rev 49(2):143–158
Messaoudi A, Belguith H, Ghram I, Hamida JB (2011) LIPABASE: a database for “true” lipase family enzymes. IJBRA 7(4):390–401
Mohamed RA, Bakar A, Thean A, Leow C (2017) Ability of T1 lipase to degrade amorphous P (3HB ): structural and functional study. Mol Biotechnol 59(7):284–293
Mohammadi M, Sepehrizadeh Z, Ebrahim-Habibi A, Shahverdi AR, Faramarzi MA, Setayesh N (2016) Enhancing activity and thermostability of lipase A from Serratia marcescens by site-directed mutagenesis. Enzyme Microb Technol 93–94:18–28
Nawani N, Kaur J (2000) Purification, characterization and thermostability of lipase from a thermophilic Bacillus sp. J33. Mol Cell Biochem 206:91–96
Ogino H, Uchiho T, Yokoo J, Kobayashi R, Ichise R, Ishikawa H (2001) Role of intermolecular disulfide bonds of the organic solvent-stable PST-01 protease in its organic solvent stability. Appl Environ Microbiol 67(2):942–947
Rahman MBA, Latif MAM (2019) Interaction studies of putative chemical ligands in binding sites of thermostable lipase from Geocillus zalihae STRAIN T1. MJAS 23(4):613–624
Rahman MZA, Salleh AB, Rahman RNZRA, Rahman MBA, Basri M, Leow TC (2012a) Unlocking the mystery behind the activation phenomenon of T1 lipase: a molecular dynamics simulations approach. Protein Sci 21(8):1210–1221
Rahman RNZRA, Shariff FM, Basri M (2012b) 3D structure elucidation of thermostable L2 lipase from Thermophilic Bacillus sp. L2. Int J Mol Sci 13:9207–9217
Saxena R, Davidson W, Sheoran A, Giri B (2003) Purification and characterization of an alkaline thermostable lipase from Aspergillus carneus. Process Biochem 39(2):239–247
Shariff FM, Rahman RNZRA, Basri M, Salleh AB (2011) A newly isolated thermostable lipase from bacillus sp. Int J Mol Sci 12(5):2917–2934
Shibuya R, Miyafusa T, Honda S (2019) Stabilization of backbone-circularized protein is attained by synergistic gains in enthalpy of folded structure and entropy of unfolded structure. FEBS J 287(8):1554–1575
Singh Y, Gupta N, Verma VV, Goel M, Gupta R (2016) Selective disruption of disulphide bonds lowered activation energy and improved catalytic efficiency in TALipB from Trichosporon asahii MSR54: MD simulations revealed flexible lid and extended substrate binding area in the mutant. BBRC 472(1):223–230
Smyth DR, Mrozkiewicz MK, McGrath WJ, Listwan P, Kobe B (2003) Crystal structures of fusion proteins with large-affinity tags. Protein Sci 12(7):1313–1322
Tyndall JDA, Sinchaikul S, Fothergill-gilmore LA, Taylor P, Walkinshaw MD (2002) Crystal structure of a thermostable lipase from Bacillus stearothermophilus P1. J Mol Biol 2836(02):859–869
Vahedi F, Talebi AF, Ghorbani E, Behroozikhah AM, Shahriari Ahmadi F, Mahmoudi M (2011) Isolation, cloning and expression of the Brucella melitensis Omp31 gene. Iran J Vet Res 12(2):156–162
Verma N, Thakur S, Bharr AK (2012) Microbial lipases: industrial applications and properties (a review). Int J Biol Sci 1(08):88–92
Wang Y, Fu Z, Huang H, Zhang H, Yao B, Xiong H, Turunen O (2012) Improved thermal performance of Thermomyces lanuginosus GH11 xylanase by engineering of an N-terminal disulfide bridge. Bioresour Technol 112:275–279
Wiedemann C, Kumar A, Lang A, Ohlenschläger O (2020) Cysteines and disulfide bonds as structure-forming units: insights from different domains of life and the potential for characterization by NMR. Front Chem 8(April):1–8
Wongwatanapaiboon J, Klinbunga S, Thummadetsak G, Chulalaksananukul S, Marty A, Chulalaksananukul W, Marty A (2016) Cloning, expression, and characterization of Aureobasidium melanogenum lipase in Pichia pastoris. Biosci Biotechnol Biochem 8451:1–10
Xu Z, Cen YK, Zou SP, Xue YP, Zheng YG (2020) Recent advances in the improvement of enzyme thermostability by structure modification. Crit Rev Biotechnol 40(1):83–98
Yin S, Ding F, Dokholyan NV (2007) Eris: an automated estimator of protein stability. Nat Methods 4(6):466–467
Yu XW, Tan NJ, Xiao R, Xu Y (2012) Engineering a disulfide bond in the lid hinge region of Rhizopus chinensis lipase: increased thermostability and altered acyl chain length specificity. PLoS ONE 7(10):1–7
Acknowledgements
We thank Dr. Anuar from Malaysia Genome Institute (MGI) for the guidance, assistance, and service during protein diffraction via X-ray crystallography. We thank Universiti Putra Malaysia for granted the High-Performance Individual Research Grants Scheme (UPM/700-1/2/GPPI/2017/9532200) for this research project.
Funding
This research was funded by Universiti Putra Malaysia through the High-Performance Individual Research Grants Scheme (UPM/700–1/2/GPPI/2017/9532200).
Author information
Authors and Affiliations
Contributions
SHH, JM, and TCL have conceived, designed, verified the data, and wrote the manuscript. SHH performed the research, tabulated, and analyzed the data. NGN conducted some part of the research and analyzed the data. MSMA, YMN, FMS, and RNZRA contributed to the materials used in the preparation, expressed, and purified the protein. All authors read and approved the manuscript.
Corresponding author
Ethics declarations
Ethical approval
This article complies with ethical standards and does not contain any studies with human participants or animals performed by any of the authors.
Conflict of interest
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Hamdan, S.H., Maiangwa, J., Nezhad, N.G. et al. Knotting terminal ends of mutant T1 lipase with disulfide bond improved structure rigidity and stability. Appl Microbiol Biotechnol 107, 1673–1686 (2023). https://doi.org/10.1007/s00253-023-12396-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00253-023-12396-5