Abstract
The objective of this study is to investigate the feasibility of utilizing the signal features in vibration measurements during the milling process and the cutting parameters for predicting the surface roughness of S45C steel. The features of vibration signals are extracted by means of the envelope analysis, statistical computation, such as RMS (root-mean-square), kurtosis, skewness, and multi-scale entropy (MSE), as well as the frequency normalization. Through the correlation analysis, the features of higher priority are sifted out so that the prediction computation efforts can be reduced. The sifted vibration signal features are then collected as the input layer parameters of artificial neural network (ANN) for surface roughness prediction. The prediction results and accuracy through using different classes of input features are also discussed and compared. The experimental results show that the surface roughness is affected not only by the cutting parameters, but also by the vibration behavior during the milling process. Therefore, the cutting parameters combining the essential vibration features can be utilized to enhance the prediction accuracy of surface roughness during the milling process.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Change history
15 February 2019
The article Prediction of surface roughness in milling process using vibration signal analysis and artificial neural network, written by T. Y. Wu and K. W. Lei, was originally published electronically on the publisher’s internet portal (currently SpringerLink) on 03 January 2019 without open access.
References
Karayel D (2009) Prediction and control of surface roughness in CNC lathe using artificial neural network. J Mater Process Technol 209:3125–3137
Asiltürk İ, Çunkaş M (2011) Modeling and prediction of surface roughness in turning operations using artificial neural network and multiple regression method. Expert Syst Appl 38:5826–5832
Chang HK, Kim JH, Kim IH, Jang DY, Han DC (2007) In-process surface roughness prediction using displacement signals from spindle motion. Int J Mach Tools Manuf 47:1021–1026
Abouelatta OB, Mádl J (2001) Surface roughness prediction based on cutting parameters and tool vibrations in turning operations. J Mater Process Technol 118:269–277
Abu-Mahfouz I, El Ariss O, Esfakur Rahman AHM, Banerjee A (2017) Surface roughness prediction as a classification problem using suport vector machine. Int J Adv Manuf Technol 92:803–815
Daniel KE, Chen JC (2007) Development of a fuzzy-nets-based surface roughness prediction system in turning operations. Comput Ind Eng 53:30–42
Yang CY, Wu TY (2015) Diagnostics of gear deterioration using EEMD approach and PCA process. Measurement 61:75–87
Yan R, Gao RX (2007) Approximate entropy as a diagnosis tool for machine health monitoringm. Mech Syst Signal Process 21:824–839
Wu TY, Yu CL, Liu DC (2016) On multi-scale entropy analysis of order-tracking measurement for bearing fault diagnosis under variable speed. Entropy 18(2):292
Tangjitsitcharoen S, Thesniyom P, Ratanakuakangwan S (2017) A wavelet approach to predict surface roughness in ball-end milling. Proc Inst Mech Eng B J Eng Manuf 231(14):2468–2478
Khorasani A, Yazdi MRS (2017) Development of a dynamic surface roughness monitoring system based on artificial neural networks (ANN) in milling operation. Int J Adv Manuf Technol 93:141–151
Wu TY, Lai CH, Liu DC (2016) Defect diagnostics of roller bearing using instantaneous frequency normalization under fluctuant rotating speed. J Mech Sci Technol 30(3):1037–1048
Huang NE, Shen Z, Long SR, Wu MC, Shih HH, Zheng Q, Yen NC, Tung CC, Liu HH (1998) The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis. Proc R Soc Lond A 454:903–995
Shannon CE (1948) A mathematical theory of communication. Bell Syst Tech J 27:379–423
Richman JS, Moorman JR (2000) Physiological time-series analysis using approximate entropy and sample entropy. Am J Physiol Heart Circ Physiol 278:H2039–H2049
Costa M, Goldberger AL, Peng CK (2002) Multiscale entropy analysis of complex physiologic time series. Phys Rev Lett 89:068102
Costa M, Goldberger AL, Peng CK (2005) Multiscale entropy analysis of biological signals. Phys Rev E 71:021906
McClelland JL, Rumelhart DE (1986) Parallel distributed processing: explorations in the microstructure of cognition 1. MIT Press
Lewis CD (1982) Industrial and business forecasting methods. Butterworths, London
Funding
This research is partially financially supported by the Ministry of Science and Technology in Taiwan, Republic of China, under the project numbers MOST 105-2221-E-005-025-MY3 and MOST 106-2218-E-194-002.
Author information
Authors and Affiliations
Corresponding author
Additional information
The original version of this article was revised due to a retrospective Open Access order.
Rights and permissions
About this article
Cite this article
Wu, T.Y., Lei, K.W. Prediction of surface roughness in milling process using vibration signal analysis and artificial neural network. Int J Adv Manuf Technol 102, 305–314 (2019). https://doi.org/10.1007/s00170-018-3176-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-018-3176-2