Abstract
A significant size effect will occur on the tool part of micro-end mill due to its small diameter, which means the internal structure of the tool part material will affect the mechanical properties of the tool part. In view of this, a comprehensive method considering size effect is proposed in this paper to predict both the static and dynamic behaviors of micro-end mill more accurately. Based on the strain gradient elasticity theory (SGET) and Hamilton’s principle, dynamic model of micro-end mill tool is presented, in which the Timoshenko beam model (TBM) considering the shear deformations and rotary inertia effects is employed. Based on the presented model, the static and dynamic behaviors of micro-end mill is obtained utilizing the finite element method (FEM). The influences of size effect on micro-end mill are investigated in detail by contrasting the static and dynamic behaviors of micro-end mill with different tool diameters and different length-to-diameter ratios, respectively. In order to verify the accuracy and efficiency of the presented method, an improved experiment is performed in this paper.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Oliaei SNB, Karpat Y (2016) Influence of tool wear on machining forces and tool deflections during micro milling. Int J Adv Manuf Technol 84(9–12):1963–1980
Bang Y, Lee K, Oh S (2005) 5-axis micro milling machine for machining micro parts. Int J Adv Manuf Technol 25(9–10):888–894
Gao P, Liang Z, Wang X, Li S, Zhou T (2018) Effects of different chamfered cutting edges of micro end mill on cutting performance. Int J Adv Manuf Technol 96(1–4):1215–1224
Lu X, Wang F, Jia Z, Si L, Zhang C, Liang SY (2017) A modified analytical cutting force prediction model under the tool flank wear effect in micro-milling nickel-based superalloy. Int J Adv Manuf Technol 91(9–12):3709–3716
Zhang X, Ehmann KF, Yu T, Wang W (2016) Cutting forces in micro-end-milling processes. Int J Mach Tools Manuf 107:21–40
Huo D, Chen W, Teng X, Lin C, Yang K (2017) Modeling the influence of tool deflection on cutting force and surface generation in micro-milling. Micromachines 8(6):188
Mustapha KB, Zhong ZW (2013) A new modeling approach for the dynamics of a micro end mill in high-speed micro-cutting. J Vib Control 19(6):901–923
Filiz S, Ozdoganlar OB (2011) A three-dimensional model for the dynamics of micro-endmills including bending, torsional and axial vibrations. Precis Eng 35(1):24–37
Yılmaz EE, Budak E, Özgüven N (2016) Modeling and measurement of micro end mill dynamics using inverse stability approach. Procedia CIRP 46:242–245
Rodriguez P, Labarga JE (2015) Tool deflection model for micromilling processes. Int J Adv Manuf Technol 76(1–4):199–207
Duncan GS, Schmitz TL (2005) An improved RCSA model for tool point frequency response prediction. Precis Eng 33(1):26–36
Mijušković G, Krajnik P, Kopač J (2015) Analysis of tool deflection in micro milling of graphite electrodes. Int J Adv Manuf Technol 76(1–4):209–217
Li P, Oosterling JAJ, Hoogstrate AM, Langen HH, Schmidt RHM (2011) Design of micro square endmills for hard milling applications. Int J Adv Manuf Technol 57(9–12):859–870
Filiz S, Ozdoganlar OB (2008) Microendmill dynamics including the actual fluted geometry and setup errors—part I: model development and numerical solution. J Manuf Sci Eng 130(3):031119
Filiz S, Ozdoganlar OB (2008) Microendmill dynamics including the actual fluted geometry and setup errors—part II: model validation and application. J Manuf Sci Eng 130(3):031120
Jun MBG, Devor RE, Kapoor SG (2006) Investigation of the dynamics of microend milling—part II: model validation and interpretation. J Manuf Sci Eng 128(4):901–912
Kong S, Zhou S, Nie Z, Wang K (2009) Static and dynamic analysis of micro beams based on strain gradient elasticity theory. Int J Eng Sci 47(4):487–498
Liang B, Zhang L, Wang B, Zhou S (2015) A variational size-dependent model for electrostatically actuated NEMS incorporating nonlinearities and Casimir force. Phys E 71:21–30
Ataei H, Beni YT, Shojaeian M (2016) The effect of small scale and intermolecular forces on the pull-in instability and free vibration of functionally graded nano-switches. J Mech Sci Technol 30(4):1799–1816
Mindlin RD, Tiersten HF (1962) Effects of couple-stresses in linear elasticity. Arch Ration Mech Anal 11(1):415–448
Yang F, Chong ACM, Lam DCC, Tong P (2002) Couple stress based strain gradient elasticity theory for elasticity. Int J Solids Struct 39(10):2731–2743
Mindlin RD, Eshel NN (1968) On first strain-gradient theories in linear elasticity. Int J Solids Struct 4(1):109–124
Lam DCC, Yang F, Chong ACM, Wang J, Tong P (2003) Experiments and theory in strain gradient elasticity. J Mech Phys Solids 51(8):1477–1508
Song Q, Liu Z, Shi Z (2014) Chatter stability for micromilling processes with flat end mill. Int J Adv Manuf Technol 71(5–8):1159–1174
Chen CC, Liu NM, Chiang KT, Chen HL (2012) Experimental investigation of tool vibration and surface roughness in the precision end-milling process using the singular spectrum analysis. Int J Adv Manuf Technol 63(5–8):797–815
Singh KK, Singh R (2018) Chatter stability prediction in high-speed micromilling of Ti6Al4V via finite element based microend mill dynamics. Adv Manuf 6(1):95–106
Kahrobaiyan MH, Asghari M, Ahmadian MT (2014) A Timoshenko beam element based on the modified couple stress theory. Int J Mech Sci 79(75–83):75–83
Wang B, Zhao J, Zhou S (2009) A micro scale Timoshenko beam model based on strain gradient elasticity theory. Eur J Mech-A/Solids 29(4):591–599
Shi Y, Mahr F, Wagner UV, Uhlmann E (2013) Gyroscopic and mode interaction effects on micro-end mill dynamics and chatter stability. Int J Adv Manuf Technol 65(5–8):895–907
Reddy JN (1999) On the dynamic behaviour of the Timoshenko beam finite elements. Sadhana 24(3):175–198
Voyiadjis GZ, Almasri AH (2009) Variable material length scale associated with nanoindentation experiments. J Eng Mech 135(3):139–148
Song JR, Liu JY, Wei YG (2011) A kind of physics interpretations of material length scales. ICHMM:341–347
Lee AC, Hoang TD (2016) Coupled lateral and torsional vibrations of the micro-drilling spindle systems. Int J Adv Manuf Technol 87(5–8):2063–2079
Maekawa A, Noda M, Shintani M (2016) Experimental study on a noncontact method using laser displacement sensors to measure vibration stress in piping systems. Measurement 79:101–111
Yuan Y, Jing X, Ehmann KF, Zhang D (2018) Surface roughness modeling in micro end-milling. Int J Adv Manuf Technol 95(5–8):1655–1664
Funding
The authors are grateful to the financial supports of the National Natural Science Foundation of China (no. 51875320), Young Scholars Program of Shandong University (no. 2015WLJH31), the United Fund of Ministry of Education for Equipment Pre-research (no. 6141A02022116), and the Key Research and Development Plan of Shandong Province (no. 2018GGX103007).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Du, Y., Song, Q., Liu, Z. et al. Size-dependent responses of micro-end mill based on strain gradient elasticity theory. Int J Adv Manuf Technol 100, 1839–1854 (2019). https://doi.org/10.1007/s00170-018-2821-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-018-2821-0