Abstract
As the application of industrial robots in machining is constantly increasing, many techniques have been developed to make this use more efficient and accurate. The robot controller is one of the key factors to influence the robot performance. This paper discusses the performance of a CNC kernel which is directly integrated into the industrial robot. The dynamic motion of the robot is thoroughly analyzed. A conventional robot controller is carefully evaluated to make a clear comparison.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Karim A, Verl A (2013) Challenges and obstacles in robot-machining, in: IEEE ISR. IEEE, Seoul 2013:1–4. doi:10.1109/ISR.2013.6695731
Chen Y, Dong F (2013) Robot machining: recent development and future research issues. Int J Adv Manuf Technol 66:1489–1497. doi:10.1007/s00170-012-4433-4
ABB, High Performance Robot, (n.d.). http://www.abb.com/product/seitp327/63bc9f7c7410ca74c125744200314d16.aspx. Accessed 2 Feb 2016
KUKA Roboter GmbH, Heavy duty robot in MT-version, (n.d.). http://www.kuka-robotics.com/germany/en/products/industrial_robots/heavy/kr500_fortec/kr480_r3330_mt/start.htm. Accessed 2 Feb 2016
Stäubli, High speed machning (hsm), (n.d.). http://www.staubli.com/en/robotics/6-axis-scara-industrial-robot/specialized-robot/high-speed-machining-robots/. Accessed 2 Feb 2016
Björkman M, Brogårdh T, Hanssen S, Lindström S-E, Moberg S, Norrlöf M (2008) A new concept for motion control of industrial robots. http://www.control.isy.liu.se/publications/
Jeon JW, Ha YY (2000) A generalized approach for the acceleration and deceleration of industrial robots and CNC machine tools. IEEE Trans Ind Electron 47:133–139. doi:10.1109/41.824135
Jiang Z, Ishita T (2008) A neural network controller for trajectory control of industrial robot manipulators. J Comput 3:1–9. doi:10.4304/jcp.3.8.1-8
Olabi A, Béarée R, Gibaru O, Damak M (2010) Feedrate planning for machining with industrial six-axis robots. Control Eng Pract 18:471–482. doi:10.1016/j.conengprac.2010.01.004
KUKA Roboter GmbH, KUKA.CNC for maximum robot performance in machining processes, 2011. http://www.kuka-robotics.com/res/sps/a737ee03-5832-4c95-9d91-84e0de80c664_kuka_cnc_englisch.pdf
Bay A (2012) KUKA.CNC—a direct approach. Auto Tech Rev 1:54–55. doi:10.1365/s40112-012-0194-6
Industrielle Steuerungstechnik GmbH, Programming manual, Stuttgart, 2010
KUKA Roboter GmbH, KUKA.CNC 2.0 for KUKA System Software 8.2, 2012
KUKA Roboter GmbH, KUKA System Software 8.2 operating and programming instructions for system integrators, 2011
Wu K, Brueninghaus J, Johnen B, Kuhlenkoetter B (2015) Applicability of stereo high speed camera systems for robot dynamics analysis. Int Conf Control Autom Robot, IEEE, Singapore 2015:44–48. doi:10.1109/ICCAR.2015.7165999
Janabi-Sharifi F, Hayward V, Chen CJ (2000) Discrete-time adaptive windowing for velocity estimation. IEEE Trans Control Syst Technol 8:1003–1009. doi:10.1109/87.880606
Cheng K (Ed) (2009) Machining dynamics: theory, applications and practices. Springer-Verlag London. doi:10.1007/978-1-84628-368-0
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wu, K., Krewet, C., Bickendorf, J. et al. Dynamic performance of industrial robot with CNC controller. Int J Adv Manuf Technol 90, 2389–2395 (2017). https://doi.org/10.1007/s00170-016-9584-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-9584-2