Abstract
The manufacturing assembly process includes the manipulation of rigid and non-rigid parts. This paper discusses a method for the estimation of the cables’ shape for robotic manipulation. The paper uses methods that take into account the mechanical behaviour of materials. More specifically, in the framework of static analyses, a higher-order analytic model of cables is introduced and the need for model calibration is pointed out. To this effect, analytical solutions are compared against experimental data. In addition, the performance of computational models is taken into consideration.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Chryssolouris G (2006) Manufacturing systems—theory and practice, 2nd edn. Springer, New York
Makris S, Michalos G, Chryssolouris G (2012) Virtual commissioning of an assembly cell with cooperating robots, advances in decision sciences. Volume, Article ID 428060
Papakostas N, Michalos G, Makris S, Zouzias D, Chryssolouris G (2011) Industrial applications with cooperating robots for the flexible assembly. Int J Comput Integr Manuf 24(7):650–660
Michalos G, Makris S, Rentzos L, Chryssolouris G (2010) Dynamic job rotation for workload balancing in human based assembly systems. CIRP J Manuf Sci Technol 2(3):153–160
Ni J, Tang W, Xing Y (2014) Three-dimensional precision analysis with rigid and compliant motions for sheet metal assembly. Int J Adv Manuf Technol 73:805–819
Liu SC, Hu SJ (1997) Variation simulation for deformable sheet metal assemblies using finite element methods. J Manuf Sci Eng 119(3)
Dini G, Santochi M (1992) Automated sequencing and subassembly detection in assembly planning. CIRP Ann Manuf Technol 41(1):1–4
Fantoni G, Santochi M, Dini G, Trach K, Scholz-Reiter BJ, Lien TK, Seliger G, Reinhart G, Franke ., Nørgaard Hansen H, Verl A (2014) Grasping devices and methods in automated production processes. CIRP Ann Manuf Technol 63
Hu SJ, Ko J, Weyand L, ElMaraghy HA, Lien TK, Koren Y, Bley H, Chryssolouris G, Nasr N, Shpitalni S (2011) Assembly system design and operations for product variety. CIRP Ann Manuf Technol 60(2):715–733
Hermansson T, Bohlin R, Carlson JS, Söderberg R (2013) Automatic assembly path planning for wiring harness installations. J Manuf Syst 32:417–422
Carlson JS, Spensieri D, Söderberg R, Bohlin R, Lindkvist L (2013) Non-nominal path planning for robust robotic assembly. J Manuf Syst 32:429–435
Koo K, Jiang X, Konno A, Uchiyama M (2011) Development of a wire harness assembly motion planner for redundant multiple manipulators. J Rob Mechatronics 23(6):907–918
Barzel R (1997) Faking dynamics of ropes and springs. IEEE Comput Graph Appl 17(3):31–39
Wakamatsu H, Hirai S, Iwata K (1995) Modeling of linear objects considering bend, twist, and extensional deformations. Robot Autom, Proc 1995 I.E. Int Conf, Vol. 1
Linn J, Stephan T, Carlsson J, Bohlin (2008) Fast simulation of quasistatic rod deformations for VR applications, progress in industrial mathematics at ECMI 2006. Math Ind 12(2008):247–253
Linn, J., Stephan, T. (2007), Fast simulation of quasistatic cable deformations using discrete rod models. Multibody Dynamics 2007, ECCOMAS Thematic Conference, Milano, Italy
Giannakopoulos AE, Petridis S, Sophianopoulos DS (2012) Dipolar gradient elasticity of cables. Int J Solids Struct 49(10):1259–1265
Papacharalampopoulos A, Stavropoulos P, Doukas C, Foteinopoulos P, Chryssolouris G (2013) Acoustic emission signal through turning tools: a computational study. (CIRP CMMO) Procedia CIRP, 14th CIRP Conference on Modelling of Machining Operations, Turin, 13-14 June
Papacharalampopoulos A, Karlis GF, Charalambopoulos A, Polyzos D (2010) BEM solutions for 2D and 3D dynamic problems in Mindlin’s strain gradient theory of elasticity. CMES 1622(1):1–29
Papacharalampopoulos A, Vavva MG, Protopappas VC, Fotiadis DI, Polyzos D (2011) A numerical study on the propagation of Rayleigh and guided waves in cortical bone according to Mindlin’s form II gradient elastic theory. J Acoust Soc Am 130:1060
Irvine HM (1992) Cable structures, Dover Publications
Landau LD, Lifshitz EM (2003-Reprint) Theory of elasticity, Pergamon Press
Timoshenko SP (1922) On the transverse vibrations of bars of uniform cross-section, Philos Mag
Davis PJ, Rabinowitz P (1984) Methods of numerical integration, Acad. Press
Ben-Amoz M (1976) A dynamic theory for composite material. J Appl Math Phys (ZAMP) Vol. 27
Papini D (2010) On shape control of cables under vertical static loads, Master’s thesis, Lund University
Mindlin RD (1964) Micro-structure in linear elasticity. Arch Ration Mech Anal 16(1):51–78
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Papacharalampopoulos, A., Makris, S., Bitzios, A. et al. Prediction of cabling shape during robotic manipulation. Int J Adv Manuf Technol 82, 123–132 (2016). https://doi.org/10.1007/s00170-015-7318-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7318-5