Abstract
A laser welding process using a 30-kW fiber laser with scanning mode optics is investigated in the paper. Welding is conducted in two ways: constant laser beam trajectory and wobbling trajectory with the use of lower speed and power. The main goal was to investigate the influence of the second wobbling laser welding pass on microstructure and mechanical properties of structural steel. The following parameters were monitored: visual control and mechanical properties (microhardness, three-point bend, and Charpy impact V-notch test); metallographic analysis and 2D and 3D computer tomography (CT) were also done. The results show that after the second welding pass, with wobbling trajectory of laser beam, middle and cap parts of the seam have a lower microhardness, in relation to the root part. It can be explained by annealing influence of the second wobbling pass at weld metal.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Casalino G, Campanelli SL, Ludovico AD (2013) Laser-arc hybrid welding of wrought to selective laser molten stainless steel. Int J Adv Manuf Technol 68:209–216
Fersini M, Sorrentino S, Zilli G (2010) Duplex stainless steel for bridges construction: comparison between SAW and Laser-GMA hybrid welding. Weld World 5(5/6):2010
M. Merklein, A. Giera (2008) Laser assisted friction stir welding of drawable steel-aluminium tailored Hybrids Springer // ESAFORM 1299–1302
Westin, Stelling K, Gumenyuk A (2011) Single-pass laser-GMA hybrid welding of 13.5 mm thick duplex stainless steel. Weld World 55:39–49
Kristensen JK (2009) Thick plate CO2-laser based hybrid welding of structural steels. Weld World 53(n° 1/2):48–58
Aalderink BJ, Pathiraj B (2010) Seam gap bridging of laser based processes for the welding of aluminium sheets for industrial applications. Int J Adv Manuf Technol 48:143–154
Gao M, Chen C, Mei S, Wang L, Zeng X (2014) Parameter optimization and mechanism of laser-arc hybrid welding of dissimilar Al alloy and stainless steel. Int J Adv Manuf Technol 74:199–208
Spottl M, Mohrbacher H (2014) Laser-based manufacturing concepts for efficient production of tailor welded sheet metals. Adv Manuf 2:193–202
Milberg J, Trautmann A (2009) Defect-free joining of zinc-coated steels by bifocal laser welding. Prod Eng Res Dev 3:9–15
Hayashi T, Matsubayashi K, Katayama S, Abe N, Matsunawa A, Ohmori A (2003) Reduction mechanism of porosity in tandem twin-spot laser welding of stainless steel. Weld Int 17(1):12–19
Yan J, Gao M, Li G, Zhang C, Zeng X, Jiang M (2013) Microstructure and mechanical properties of laser-MIG hybrid welding of 1420 Al-Li alloy. Int J Adv Manuf Technol 66:1467–1473
Yangchun Y, Wang C, Xiyuan H, Wang J, Shengfu Y (2010) Porosity in fiber laser formation of 5A06 aluminum alloy. J Mech Sci Technol 24(5):1077–1082
Chowdhury SH, Chen DL, Bhole SD, Powidajko E, Weckman DC, Zhou Y (2012) Fiber laser welded AZ31 magnesium alloy: the effect of welding speed on microstructure and mechanical properties. Metall Mater Trans A 43A:2133
Chen YB, Feng JC, Li LQ, Li Y, Chang S (2013) Effect of welding positions on droplet transfer in CO2 laser-MAG hybrid welding. Int J Adv Manuf Technol 68:1351–1359
Chen Q, Wang Y Effect of heat treatment temperature on dissimilar welded joint. China Weld (Engl Ed) 22 (3):60–65
Lu F, Liu P, Ji H, Xu X, Gao Y (2014) Dramatically enhanced impact toughness in welded 10%Cr rotor steel by high temperature post-weld heat treatment. Mater Charact 92:149–158
Wang X-Y, Lei W-J (2011) Effect of postweld heat-treatment on microstructure and properties of 12Cr1MoVG/12Cr2MoWVTiB steel welded joints. Heat Treat Met 36(6):92–96
Liu W, Ma J, Atabaki MM, Pillai R, Kumar B, Vasudevan U, Sreshta H, Kovacevic R (2015) Hybrid laser-arc welding of 17-4 PH martensitic stainless steel. Lasers Manuf Mater Process 2(2):74-90
Fang C, Song Y, Wu W, Wei J, Zhang S, Li H, Dolgetta N, Libeyre P, Cormary C, Sgobba S (2014) The laser welding with hot wire of 316LN thick plate applied on ITER correction coil case. J Fusion Energy 33:752–758
Karhu M, Kujanpaa V, Lippold J et al (eds) (2011) Solidification cracking studies in multi pass laser hybrid welding of thick section austenitic stainless steel. Hot cracking phenomena in welds III. Springer-Verlag, Berlin
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Below is the link to the electronic supplementary material.
ESM 1
(RAR 2264 kb)
Rights and permissions
About this article
Cite this article
Kuryntsev, S.V., Gilmutdinov, A.K. The effect of laser beam wobbling mode in welding process for structural steels. Int J Adv Manuf Technol 81, 1683–1691 (2015). https://doi.org/10.1007/s00170-015-7312-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7312-y