Abstract
Anti-rust aluminum is widely used in aviation, aerospace, communications, as well as weapons with non-corrosion, light, and other fine characteristics. In this study, in order to improve the machined surface quality and find the functional relation between cutting parameters and surface roughness, a series of cutting experiments for AlMn1Cu were conducted, and the surface roughness values in high-speed milling were obtained. Firstly, according to the analysis of variance (ANOVA) of factorial experiments, the cutting parameters significantly influencing the surface roughness were presented. Secondly, the mathematical prediction models of surface roughness based on the cutting parameters were established by using the partial least squares regression. Finally, experiments are further designed and carried out to validate the accuracy of the proposed prediction model.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Benardos PG, Vosniakos G-C (2003) Prediction surface roughness in machining: a review. Int J Mach Tool Manuf 43:833–844
Geoffrey B, Winston AK (1989) Fundamentals of machining and machine tools. Marcel dekker, INC, New York, US
Fang XD, Sfai-Jahanshaki H (1997) A new algorithm for developing a reference model for prediction surface roughness in finish machining of steels. Int J Prod Res 35:179–197
Hasan Ö, Tuncay E, Mustafa Ç (2006) A study of the Taguchi optimization method for surface roughness in finish milling of mold surfaces. Int J Adv Manuf Technol 28:694–700
Chen JC, Lee SS (2003) An on-line surface roughness recognition system using an accelerometer in turning operations. J Eng Technol 20:12–18
El-Axir MH, Othman OM, Abodiena AM (2008) Study on the inner surface finishing of aluminum alloy 2014 by ball burnishing process. J Mater Process Technol 202:435–442
Erol K, Mesut H, Ahmet Y (2011) Prediction and analysis of surface roughness characteristics of a non-ferrous material using ANN in CNC turning. Int J Adv Manuf Technol 52:79–88
Wang SJ, To S, Cheung CF (2013) An investigation into material-induced surface roughness in ultra-precision milling. Int J Adv Manuf Technol 68:607–616
Cakir CM, Ensrioglu C, Demirayak I (2009) Mathematical modeling of surface roughness for evaluating the effects of cutting parameters and coating material. J Mater Process Technol 209:102–109
Chinnasamy NS, Muthu PK (2011) Optimization of drilling parameters on surface roughness in drilling of AISI 1045 using response surface methodology and genetic algorithm. Int J Adv Manuf Technol 57:1043–1051
Karayel D (2009) Prediction and control of surface roughness in CNC lathe using artificial neural network. J Mater Process Technol 209:3125–3137
Huang BP, Chen JC, Li Y (2008) Artificial-neural-networks-based surface roughness Pokayoke system for end-milling operations. Neurocomputing 71:544–549
Öktem H (2009) An integrated study of surface roughness for modelling and optimization of cutting parameters during end milling operation. Int J Adv Manuf Technol 43:852–861
Lee BY, Liu HS, Tarng YS (1998) Modeling and optimization of drilling process. J Mater Process Technol 74:149–157
Çolak O, Kurbanoglu C, Kayacan MC (2007) Milling surface roughness prediction using evolutionary programming methods. Mater Des 28:657–666
Ding TC, Zhang S, Wang YW, Zhu XL (2010) Empirical models and optimal cutting parameters for cutting forces and surface roughness in hard milling of AISI H13 steel. Int J Adv Manuf Technol 51:45–55
Basak H, Goktas Haldun H (2009) Burnishing process on Al-alloy and optimization of surface roughness and surface hardness by fuzzy logic. Mater Des 30:1275–1281
Oktem H, Erzurumlu T, Erzincanli F (2006) Prediction of minimum surface roughness in end milling mold parts using neural network and genetic algorithm. Mater Des 27:735–744
Bozdemir M, Aykut Ş (2012) Optimization of surface roughness in end milling Castamide. Int J Adv Manuf Technol 62:495–503
Palani S, Natarajan U (2011) Prediction of surface roughness in CNC end milling by machine vision system using artificial neural network based on 2D Fourier transform. Int J Adv Manuf Technol 54:1033–1042
Dhokia VG, Kumar S, Vichare P, Newman ST (2008) An intelligent approach for the prediction of surface roughness in ball-end machining of polypropylene. Robotics Comput-Integ Manuf 24:835–842
Lu C (2008) Study on prediction of surface quality in machining process. J Mater Process Technol 205:439–450
Benardos PG, Vosniakos GC (2002) Prediction of surface roughness in CNC face milling using neural networks and Taguchi’s design of experiments. Robot Comput Integ Manuf 18:343–354
Çaydaş U, Hasçalik A (2008) A study on surface roughness in abrasive waterjet machining process using artificial neural networks and regression analysis method. J Mater Process Technol 202:574–582
EI-Sonbaty IA, Khashaba UA, Selmy AI, Ali AI (2008) Prediction of surface roughness profiles for milled surface using an artificial neural network and fractal geometry approach. J Mater Process Technol 200:271–278
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, Z.H., Yuan, J.T., Liu, T.T. et al. Study on surface roughness in high-speed milling of AlMn1Cu using factorial design and partial least square regression. Int J Adv Manuf Technol 76, 1783–1792 (2015). https://doi.org/10.1007/s00170-014-6400-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-014-6400-8