Abstract
Metrology, in a broad term, is defined as the science of measurement or the study of measurement. The term metrology is the combination of Greek terminologies “metron” and “logos,” which refers to the study of measurement, including both experimental and theoretical. In the present era of globalization, it is an imperative element in many fields, including manufacturing, engineering, science, and technology. It is used in diversified applications, including characterization and structural analysis in engineering; construction of different products in aerospace; process and quality controls in manufacturing; energy generation, transmission, and distribution in energy; and the development of medical products, devices, safety standards, diagnostic, monitoring, control, and therapeutic purpose in healthcare. The list of applications is endless, and only a few are mentioned. Metrology is applied to corroborate and confirm already defined specifications and standards in these applications. The metrological traceability of the standards is often established by calibrating, testing, and verifying them against better standard(s), supported through a well-recognized quality system implemented in the certified, accredited laboratories authorized by certification bodies. A fleeting investigation of the metrological practices being followed is presented in this chapter, enabling an understanding emphasizing the evolution of industrial revolutions, some of the application-oriented trends in industrial metrology, the contribution of metrology in achieving Sustainable Development Goals (SDGs) set by United Nations Organisation (UNO), and the role of industrial metrological measurements in the national quality infrastructure. It is hoped that the chapter will provide a good resource material in a single window for the readers following and working in the field of industrial metrology.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Ačko B, Weber H, Hutzschenreuter D, Smith I (2020) Communication and validation of metrological smart data in IoT-networks. Adv Prod Eng Manag 15(1):107
Aswal DK (ed) (2020a) Metrology for inclusive growth of India. Springer Nature, Singapore
Aswal DK (2020b) Quality infrastructure of India and its importance for inclusive national growth. Mapan 35(2):139–150
Bailey DC (2017) Not Normal: the uncertainties of scientific measurements. R Soc Open Sci 4(1):160600
Bauer JM, Bas G, Durakbasa NM, Kopacek P (2015) Development trends in automation and metrology. IFAC-PapersOnLine 48(24):168–172
Bhardwajan AA, Dakkumalla S, Arora A, Ganesh TS, Sen Gupta A (2021) Navigation with Indian constellation and its applications in metrology. Mapan 36(2):227–236
Carmignato S, Pierobon A, Rampazzo P, Parisatto M, Savio E (2012, September) CT for industrial metrology-accuracy and structural resolution of CT dimensional measurements. In 4th conference on industrial computed tomography (iCT), pp 19–21
Chakrabarti S, Kyriakides E, Bi T, Cai D, Terzija V (2008) Measurements get together. IEEE Power Energ Mag 7(1):41–49
Chourasia S, Tyagi A, Pandey SM, Walia RS, Murtaza Q (2022) Sustainability of industry 6.0 in global perspective: benefits and challenges. Mapan 37:1–10
Chua CK, Wong CH, Yeong WY (2017) Standards, quality control, and measurement sciences in 3D printing and additive manufacturing. Academic, London
da Cruz AL, Fisher WP Jr, Pendrill L, Felin A (2019) Accelerating the realization of the United Nations sustainable development goals through metrological multi-stakeholder interoperability. J Phys Conf Ser 1379(1):012046. IOP Publishing
Davis RS (2018) How to define the units of the revised SI starting from seven constants with fixed numerical values. J Res Natl Inst Stand Technol 123:1
De Chiffre L, Carmignato S, Kruth JP, Schmitt R, Weckenmann A (2014) Industrial applications of computed tomography. CIRP Ann 63(2):655–677
Emmer C, Glaesner KH, Pfouga A, Stjepandić J (2017) Advances in 3D measurement data management for industry 4.0. Procedia Manuf 11:1335–1342
Fanton JP (2019) A brief history of metrology: past, present, and future. Int J Metrol Qual Eng 10:5
Fisher WP Jr, Pendrill L, da Cruz AL, Felin A (2019) Why metrology? Fair dealing and efficient markets for the United Nations’ sustainable development goals. J Phys Conf Ser 1379(1):012023. IOP Publishing
Galimullina NM, Vagaeva OA, Lomakin DE, Melnik TE, Novakovskaya AV (2020) Soft skills in training specialists in the sphere of standardization, metrology and quality management as a part of education for sustainable development. J Phys Conf Ser 1515(2):022023. IOP Publishing
Garg N, Rab S, Varshney A, Jaiswal SK, Yadav S (2021) Significance and implications of digital transformation in metrology in India. Meas Sens 18:100248
Garner CM, Vogel EM (2006) Metrology challenges for emerging research devices and materials. IEEE Trans Semicond Manuf 19(4):397–403
Global Newswire (2022, Oct 18) Reportlinker.com announces the release of the report “Industrial Metrology Market by Offering, Equipment, Application, End-User Industry, Region – Global Forecast to 2027”. https://www.reportlinker.com/p05391640/?utm_source=GNW
Grek S (2020) Prophets, saviours and saints: symbolic governance and the rise of a transnational metrological field. Int Rev Educ 66(2):139–166
Gupta SV (2009) Units of measurement: past, present and future. International system of units, vol 122. Springer Science & Business Media
Javaid M, Haleem A, Rab S, Singh RP, Suman R (2021) Sensors for daily life: a review. Sens Int 2:100121
Javaid M, Haleem A, Singh RP, Suman R, Hussain B, Rab S (2022) Extensive capabilities of additive manufacturing and its metrological aspects. Mapan 37:1–14
Koc TC, Teker S (2019) Industrial revolutions and its effects on quality of life. Press Academia Procedia 9(1):304–311
Kumar V, Albashrawi S (2022) Quality infrastructure of Saudi Arabia and its importance for vision 2030. Mapan 37(1):97–106
Kuster M (2020, June) A measurement information infrastructure’s benefits for industrial metrology and IoT. In: 2020 IEEE international workshop on metrology for industry 4.0 & IoT. IEEE, Piscataway, pp 479–484
Lazzari A, Pou JM, Dubois C, Leblond L (2017) Smart metrology: the importance of metrology of decisions in the big data era. IEEE Instrum Meas Mag 20(6):22–29
Lean J (2015) Measurements: what and why? Climate 2020, facing the future
Mari L, Wilson M (2014) An introduction to the Rasch measurement approach for metrologists. Measurement 51:315–327
Meškuotienė A, Dobilienė J, Raudienė E, Gaidamovičiūtė L (2022) A review of metrological supervision: towards the common understanding of metrological traceability in legal and industrial metrology. Mapan 37:1–9
Mission 500 GW by 2030, India takes one more step to reduce carbon emission and reduce the cost of power to consumers, Ministry of Power allows bundling of renewable to replace thermal power under existing PPAs. https://pib.gov.in/PressReleaseIframePage.aspx?PRID=1772347. Accessed 31 Oct 2022
Mustapää T, Autiosalo J, Nikander P, Siegel JE, Viitala R (2020, June) Digital metrology for the internet of things. In: 2020 global internet of things summit (GIoTS). IEEE, Piscataway, pp 1–6
Peiser HS, Sangster R., Jung W (eds) (1979) Metrology in industry and government: how to find out who needs what services, NBS Special Publication 539, U.S. Department of Commerce/National Bureau of Standards as Proceedings of a Regional Seminar Held during September 27–28, 1978 at the Korea Standards Research Institute (KRISS), Dae Jeon
Popkova EG, Ragulina YV, Bogoviz AV (2019) Fundamental differences of transition to industry 4.0 from previous industrial revolutions. In: Industry 4.0: industrial revolution of the 21st century. Springer, Cham, pp 21–29
Pozdnyakova UA, Golikov VV, Peters IA, Morozova IA (2019) Genesis of the revolutionary transition to industry 4.0 in the 21st century and overview of previous industrial revolutions. In: Industry 4.0: industrial revolution of the 21st century. Springer, Cham, pp 11–19
Rab S, Yadav S (2022) Concept of unbroken chain of traceability. Resonance 27(5):835–838
Rab S, Yadav S, Garg N, Rajput S, Aswal DK (2020) Evolution of measurement system and SI units in India. Mapan 35(4):475–490
Rab S, Yadav S, Jaiswal SK, Haleem A, Aswal DK (2021a) Quality infrastructure of national metrology institutes: a comparative study. Indian J Pure Appl Phys (IJPAP) 59:285
Rab S, Yadav S, Haleem A, Jaiswal SK, Aswal DK (2021b) Improved model of global quality infrastructure index (GQII) for inclusive national growth. J Sci Ind Res (JSIR) 80(9):790–799
Rab S, Wan M, Yadav S (2022a) Let’s get digital. Nat Phys 18(8):960–960
Rab S, Zafer A, Kumar Sharma R, Kumar L, Haleem A, Yadav S (2022b) National and global status of the high pressure measurement and calibration facilities. Indian J Pure Appl Phys (IJPAP) 60(1):38–48
Sanjay Y, Dilawar SN, Titus SSK, Jaiswal SK, Jaiswal VK, Naveen G, Komal B, Aswal DK (2020a) Physico-mechanical metrology-part I: impetus for inclusive industrial growth. In: Aswal DK (ed) Metrology for inclusive growth of India. Springer, Singapore, pp 237–252. https://doi.org/10.1007/978-981-15-8872-3_6
Sanjay Y, Goutam M, Nidhi S, Santwana P, Rina S, Girija M, Mukesh J, Shivagan DD, Komal B, Jaiswal SK, Jaiswal VK, Aswal DK (2020b) Physico-mechanical metrology-part II: mass and length metrology. In: Aswal DK (ed) Metrology for inclusive growth of India. Springer, Singapore, pp 253–306. https://doi.org/10.1007/978-981-15-8872-3_7
Sanjay Y, Shivagan DD, Komal B, Jaiswal VK, Parag S, Shibu S, Mahavir S, Naveen G, Kirti S, Titus SSK, Aswal DK (2020c) Physico-mechanical metrology-part III: thermal, optical radiation and acoustic metrology. In: Aswal DK (ed) Metrology for inclusive growth of India. Springer, Singapore, pp 307–376. https://doi.org/10.1007/978-981-15-8872-3_8
Sanjay Y, Titus SSK, Kumar R, Elizabeth I, Sharma ND, Ashok K, Dubey PK, Zafer A, Jaiswal SK, Naveen G, Komal B, Aswal DK (2020d) Physico-mechanical metrology-part IV: force, pressure and flow metrology. In: Aswal DK (ed) Metrology for inclusive growth of India. Springer, Singapore, pp 377–456. https://doi.org/10.1007/978-981-15-8872-3_9
Schmitt RH, Peterek M, Morse E, Knapp W, Galetto M, Härtig F, …, Estler WT (2016) Advances in large-scale metrology–review and future trends. CIRP Ann 65(2):643–665
Sharma C, Mandal TK, Singh S, Gupta G, Kulshrestha MJ, Johri P, Ranjan A, Upadhayaya AK, Das RM, Soni D, Mishra SK, Muthusamy SK, Sharma SK, Singh P, Aggarwal SG, Radhakrishnan SR, Kumar M (2020) Metrology for atmospheric environment – part I: atmospheric constituents. In: Aswal DK (ed) Metrology for inclusive growth of India. Springer, Singapore, pp 639–689. https://doi.org/10.1007/978-981-15-8872-3_13
Sullivan DC, Bresolin L, Seto B, Obuchowski NA, Raunig DL, Kessler LG (2015) Introduction to metrology series. Stat Methods Med Res 24(1):3–8
Thiel F (2018) Digital transformation of legal metrology–the European metrology cloud. OIML Bull 59(1):10–21
Tsukahara H (2007) Three-dimensional measurement technologies for advanced manufacturing. Fujitsu Sci Tech J 43(1):76–86
Tzalenchuk A, Spethmann N, Prior T, Hendricks JH, Pan Y, Bubanja V, …, Goldstein BL (2022) The expanding role of National Metrology Institutes in the quantum era. Nat Phys 18(7):724–727
Varshney A, Garg N, Nagla KS, Nair TS, Jaiswal SK, Yadav S, Aswal DK (2021) Challenges in sensors technology for industry 4.0 for futuristic metrological applications. Mapan 36(2):215–226
Wang C, Song L, Li S (2018) The industrial internet platform: trend and challenges. Strategic Stud Chinese Acad Eng 20(2):15–19
Yadav S, Aswal DK (2020) Redefined SI units and their implications. Mapan 35(1):1–9
Yadav S, Zafer A, Kumar A, Sharma ND, Aswal DK (2018) Role of national pressure and vacuum metrology in Indian industrial growth and their global metrological equivalence. Mapan 33(4):347–359
Yadav S, Mandal G, Shivagan DD, Sharma P, Zafer A, Aswal DK (2020a) International harmonization of measurements-part I: international measurement system. In: Aswal DK (ed) Metrology for inclusive growth of India. Springer, Singapore, pp 37–82. https://doi.org/10.1007/978-981-15-8872-3_2
Yadav S, Mandal G, Shivagan DD, Sharma P, Zafer A, Aswal DK (2020b) International harmonization of measurements – part II: international and national dissemination mechanism. In: Aswal DK (ed) Metrology for inclusive growth of India. Springer, Singapore, pp 83–143. https://doi.org/10.1007/978-981-15-8872-3_3
Yadav S, Mandal G, Jaiswal VK, Shivagan DD, Aswal DK (2021) 75th foundation day of CSIR-National Physical Laboratory: celebration of achievements in metrology for national growth. Mapan 36(1):1–32
Zafer A, Yadav S, Sharma ND, Kumar A, Aswal DK (2019) Economic impact studies of pressure and vacuum metrology at CSIR-NPL, India. Mapan 34(4):421–429
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Section Editor information
Rights and permissions
Copyright information
© 2023 Springer Nature Singapore Pte Ltd.
About this entry
Cite this entry
Yadav, S., Rab, S., Jaiswal, S.K., Kumar, A., Aswal, D.K. (2023). Industrial Metrology. In: Aswal, D.K., Yadav, S., Takatsuji, T., Rachakonda, P., Kumar, H. (eds) Handbook of Metrology and Applications. Springer, Singapore. https://doi.org/10.1007/978-981-99-2074-7_34
Download citation
DOI: https://doi.org/10.1007/978-981-99-2074-7_34
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-2073-0
Online ISBN: 978-981-99-2074-7
eBook Packages: EngineeringReference Module Computer Science and Engineering