Abstract
Synthetic fiber-reinforced epoxy composites have a broad spectrum in structural applications. The study of impact behavior of a structural element is a prime focus for any engineer or designer. The current chapter explain various impact testing methods, failure modes in impact testing, and factors affecting the impact strength of synthetic fiber-reinforced epoxy composites. Major testing methods used to analyze the impact behavior of composites are discussed in details along with different failure modes. Energy transferred from matrix to reinforcing fibers and the fracture mechanism in different testing methods are also elaborated. The methods used to enhance the impact toughness of composites are also highlighted in different sections.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
A.Y. Al-Maharma, P. Sendur, Review of the main factors controlling the fracture toughness and impact strength properties of natural composites. Mater. Res. Exp. 6(2), 022001 (2018). https://doi.org/10.1088/2053-1591/aaec28
K.N. Bharath, P. Madhu, T.G. Gowda, A. Verma, M.R. Sanjay, S. Siengchin, A novel approach for development of printed circuit board from biofiber based composites. Polym. Compos. 41(11), 4550–4558 (2020)
K.N. Bharath, P. Madhu, T.Y. Gowda, A. Verma, M.R. Sanjay, S. Siengchin, Mechanical and chemical properties evaluation of sheep wool fiber–reinforced vinylester and polyester composites. Mater. Perform. Charact. 10(1), 99–109 (2021)
N. Bisht, A. Verma, S. Chauhan, V.K. Singh, Effect of functionalized silicon carbide nano-particles as additive in cross-linked PVA based composites for vibration damping application. J. Vinyl Addit. Technol. 27(4), 920–932 (2021)
A. Chaudhary, S. Sharma, A. Verma, Optimization of WEDM process parameters for machining of heat treated ASSAB’88 tool steel using response surface methodology (RSM). Mat. Today Proceed. (2021a)
A. Chaudhary, S. Sharma, A. Verma, WEDM machining of heat treated ASSAB’88 tool steel: A comprehensive experimental analysis. Mater. Today Proc. (2021b)
A. Chaurasia, A. Verma, A. Parashar, R.S. Mulik, Experimental and computational studies to analyze the effect of h-BN nanosheets on mechanical behavior of h-BN/polyethylene nanocomposites. J. Phys. Chem. C 123(32), 20059–20070 (2019)
S.H. Deng, J.J. Zhao, Q.F. Lin, C.J. Fan, X.D. Zhou, Formation of interfacial network structure via photo-crosslinking in carbon fiber/epoxy composites. Express Polym Lett 8(7), 505–516 (2014). https://doi.org/10.3144/expresspolymlett.2014.54
A. Güneş, Ö.S. Şahin, Investigation of the effect of surface crack on low-velocity impact response in hybrid laminated composite plates. J. Braz. Soc. Mech. Sci. Eng. 42, 1–20 (2020). https://doi.org/10.1007/s40430-020-02422-2
Y. Hirai, H. Hamada, J.K. Kim, Impact response of woven glass-fabric composites – I: Effect of fibre surface treatment. Compos. Sci. Technol. 58(1), 91–104 (1998)
N. Jain, A. Verma, V.K. Singh, Dynamic mechanical analysis and creep-recovery behaviour of polyvinyl alcohol based cross-linked biocomposite reinforced with basalt fiber. Mater. Res. Express 6(10), 105373 (2019)
M. Jawaid, S.M. Sapuan, O.Y. Alotman, Green Biocomposites Manufacturing and Properties (2017), p. 409. https://doi.org/10.1007/978-3-319-46610-1
E. Kondryakov, O. Panasenko, A. Kravchyk, V. Kharchenko, Peculiarities of the crack initiation and propagation in different specimen types. Procedia Struct. Integr. 16, 43–50 (2019). https://doi.org/10.1016/j.prostr.2019.07.020
M.K. Marichelvam, P. Manimaran, A. Verma, M.R. Sanjay, S. Siengchin, K. Kandakodeeswaran, M. Geetha, A novel palm sheath and sugarcane bagasse fiber based hybrid composites for automotive applications: An experimental approach. Polym. Compos. 42(1), 512–521 (2021)
T. Miyamoto, T. Sugano, Impact strength of epoxy resin. Polym. J. 6(5), 451–452 (1974)
Z. Naghizadeh, M. Faezipour, M.H. Pol, G.H. Liaghat, A. Abdolkhani, Improvement in impact resistance performance of glass/epoxy composite through carbon nanotubes and silica nanoparticles. Proc. Instit. Mech. Eng. L 232(9), 785–799 (2018)
H. Park, H. Jung, J. Yu, M. Park, S.Y. Kim, Carbon fiber-reinforced plastics based on epoxy resin toughened with core shell rubber impact modifiers. E-Polymers 15(6), 369–375 (2015). https://doi.org/10.1515/epoly-2015-0068
S. Rastogi, A. Verma, V.K. Singh, Experimental response of nonwoven waste cellulose fabric–reinforced epoxy composites for high toughness and coating applications. Mater. Perform. Charact. 9(1), 151–172 (2020)
K. Singh, N. Jain, A. Verma, V.K. Singh, S. Chauhan, Functionalized graphite–reinforced cross-linked poly (vinyl alcohol) nanocomposites for vibration isolator application: Morphology, mechanical, and thermal assessment. Mater. Perform. Charact. 9(1), 215–230 (2020)
V. Singla, A. Verma, A. Parashar, A molecular dynamics based study to estimate the point defects formation energies in graphene containing STW defects. Mater. Res. Express 6(1), 015606 (2018)
M.S. Sohn, X.Z. Hu, J.K. Kim, L. Walker, Impact damage characterisation of carbon fibre/epoxy composites with multi-layer reinforcement. Compos. Part B 31(8), 681–691 (2000). https://doi.org/10.1016/S1359-8368(00)00028-7
W.F. Thomas, Factors affecting the impact strength of glass-fibre-reinforced polyester composites. Composites 4(3), 105–110 (1973). https://doi.org/10.1016/0010-4361(73)90583-1
A. Verma, A. Parashar, The effect of STW defects on the mechanical properties and fracture toughness of pristine and hydrogenated graphene. Phys. Chem. Chem. Phys. 19(24), 16023–16037 (2017)
A. Verma, A. Parashar, Structural and chemical insights into thermal transport for strained functionalised graphene: A molecular dynamics study. Mater. Res. Express 5(11), 115605 (2018a)
A. Verma, A. Parashar, Molecular dynamics based simulations to study the fracture strength of monolayer graphene oxide. Nanotechnology 29(11), 115706 (2018b)
A. Verma, A. Parashar, Molecular dynamics based simulations to study failure morphology of hydroxyl and epoxide functionalised graphene. Comput. Mater. Sci. 143, 15–26 (2018c)
A. Verma, A. Parashar, Characterization of 2D nanomaterials for energy storage, in Recent Advances in Theoretical, Applied, Computational and Experimental Mechanics, (Springer, Singapore, 2020), pp. 221–226
A. Verma, V.K. Singh, Experimental investigations on thermal properties of coconut shell particles in DAP solution for use in green composite applications. J. Mater. Sci. Eng. 5(3), 1000242 (2016)
A. Verma, V.K. Singh, Mechanical, microstructural and thermal characterization of epoxy-based human hair–reinforced composites. J. Test. Eval. 47(2), 1193–1215 (2019)
A. Verma, V.K. Singh, S.K. Verma, A. Sharma, Human hair: A biodegradable composite fiber–a review. Int J Waste Resour 6(206), 2 (2016a)
A. Verma, V.K. Singh, M. Arif, Study of flame retardant and mechanical properties of coconut shell particles filled composite. Res. Rev. J. Mater. Sci. 4(3), 1–5 (2016b)
A. Verma, A. Gaur, V.K. Singh, Mechanical properties and microstructure of starch and sisal fiber biocomposite modified with epoxy resin. Mater. Perform. Charact. 6(1), 500–520 (2017)
A. Verma, A. Parashar, M. Packirisamy, Atomistic modeling of graphene/hexagonal boron nitride polymer nanocomposites: A review. Wiley Interdiscip. Rev. Comput. Mol. Sci. 8(3), e1346 (2018a)
A. Verma, P. Negi, V.K. Singh, Physical and thermal characterization of chicken feather fiber and crumb rubber reformed epoxy resin hybrid composite. Adv. Civil Eng. Mater. 7(1), 538–557 (2018b)
A. Verma, P. Negi, V.K. Singh, Experimental investigation of chicken feather fiber and crumb rubber reformed epoxy resin hybrid composite: Mechanical and microstructural characterization. J. Mech. Behav. Mater. 27(3–4) (2018c)
A. Verma, K. Joshi, A. Gaur, V.K. Singh, Starch-jute fiber hybrid biocomposite modified with an epoxy resin coating: Fabrication and experimental characterization. J. Mech. Behav. Mater. 27(5–6) (2018d)
A. Verma, A. Parashar, M. Packirisamy, Tailoring the failure morphology of 2D bicrystalline graphene oxide. J. Appl. Phys. 124(1), 015102 (2018e)
A. Verma, P. Negi, V.K. Singh, Experimental analysis on carbon residuum transformed epoxy resin: Chicken feather fiber hybrid composite. Polym. Compos. 40(7), 2690–2699 (2019a)
A. Verma, A. Parashar, M. Packirisamy, Effect of grain boundaries on the interfacial behaviour of graphene-polyethylene nanocomposite. Appl. Surf. Sci. 470, 1085–1092 (2019b)
A. Verma, L. Budiyal, M.R. Sanjay, S. Siengchin, Processing and characterization analysis of pyrolyzed oil rubber (from waste tires)-epoxy polymer blend composite for lightweight structures and coatings applications. Polym. Eng. Sci. 59(10), 2041–2051 (2019c)
A. Verma, R. Kumar, A. Parashar, Enhanced thermal transport across a bi-crystalline graphene–polymer interface: An atomistic approach. Phys. Chem. Chem. Phys. 21(11), 6229–6237 (2019d)
A. Verma, C. Singh, V.K. Singh, N. Jain, Fabrication and characterization of chitosan-coated sisal fiber–Phytagel modified soy protein-based green composite. J. Compos. Mater. 53(18), 2481–2504 (2019e)
A. Verma, A. Parashar, M. Packirisamy, Role of chemical Adatoms in fracture mechanics of graphene Nanolayer. Mater. Today Proceed. 11, 920–924 (2019f)
A. Verma, K. Baurai, M.R. Sanjay, S. Siengchin, Mechanical, microstructural, and thermal characterization insights of pyrolyzed carbon black from waste tires reinforced epoxy nanocomposites for coating application. Polym. Compos. 41(1), 338–349 (2020a)
A. Verma, A. Parashar, N. Jain, V.K. Singh, S.M. Rangappa, S. Siengchin, Surface modification techniques for the preparation of different novel biofibers for composites, in Biofibers and Biopolymers for Biocomposites, (Springer, Cham, 2020b), pp. 1–34
A. Verma, N. Jain, V.K. Avinash Parashar, S.M.R. Singh, S. Siengchin, Chapter 7: Design and modeling of lightweight polymer composite structures, in Lightweight Polymer Composite Structures: Design and Manufacturing Techniques, (Taylor & Francis Group (CRC Press), Boca Raton, 2020c), pp. 193–224
A. Verma, N. Jain, V.K. Avinash Parashar, S.M.R. Singh, S. Siengchin, Chapter 1: Lightweight graphene composite materials, in Lightweight Polymer Composite Structures: Design and Manufacturing Techniques, (Taylor & Francis Group (CRC Press), Boca Raton, 2020d), pp. 1–20
A. Verma, A. Parashar, S.K. Singh, N. Jain, M.R. Sanjay, S. Siengchin, Chapter 16: Modeling and simulation in polymer coatings, in Polymer Coatings: Technologies and Applications, (Taylor & Francis Group (CRC Press), Boca Raton, 2020e), pp. 309–324
A. Verma, N. Jain, S. Rastogi, V. Dogra, M.R. Sanjay, S. Siengchin, R. Mansour, Chapter 4: Mechanism, anti-corrosion protection and components of anti-corrosion polymer coatings, in Polymer Coatings: Technologies and Applications, (Taylor & Francis Group (CRC Press), Boca Raton, 2020f), pp. 53–66
A. Verma, N. Jain, S.M.R. Kalpana, S. Siengchin, M. Jawaid, Chapter 10: Natural fibers based bio-phenolic composites, in Phenolic Polymers Based Composite Materials, (Springer Nature, Singapore, 2020g), pp. 153–168
A. Verma, A. Parashar, N. Jain, V.K. Singh, S.M. Rangappa, S. Siengchin, Surface modification techniques for the preparation of different novel biofibers for composites, in Biofibers and Biopolymers for Biocomposites, (2020h), pp. 1–34
A. Verma, N. Jain, A. Parashar, A. Gaur, M.R. Sanjay, S. Siengchin, Lifecycle assessment of thermoplastic and thermosetting bamboo composites, in Bamboo Fiber Composites, (Springer, Singapore, 2021a), pp. 235–246
A. Verma, W. Zhang, A.C. van Duin, ReaxFF reactive molecular dynamics simulations to study the interfacial dynamics between defective h-BN nanosheet and water nanodroplets. Phys. Chem. Chem. Phys. 23, 10822–10834 (2021b)
S. Yadav, V.K. Srivastava, Effect of thickness and crack length on the impact behaviour of particle loaded GFRP composite. Int. Res. J. Eng. Technol. 2(02), 115 (2015)
Acknowledgments
Monetary and academic support from the University of Petroleum and Energy Studies, Dehradun, India, is highly appreciable.
Conflicts of Interest
“There are no conflicts of interest to declare by the authors.”
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Springer Nature Singapore Pte Ltd.
About this entry
Cite this entry
Lila, M.K., Verma, A., Bhurat, S.S. (2022). Impact Behaviors of Epoxy/Synthetic Fiber Composites. In: Mavinkere Rangappa, S., Parameswaranpillai, J., Siengchin, S., Thomas, S. (eds) Handbook of Epoxy/Fiber Composites . Springer, Singapore. https://doi.org/10.1007/978-981-19-3603-6_55
Download citation
DOI: https://doi.org/10.1007/978-981-19-3603-6_55
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-3602-9
Online ISBN: 978-981-19-3603-6
eBook Packages: Chemistry and Materials ScienceReference Module Physical and Materials ScienceReference Module Chemistry, Materials and Physics