Zusammenfassung
Die mit Einführung der Abgasemissionsstufe EPA Tier 2 (2005) für Großdieselmotoren (>560 kW) verschärften Emissionsbestimmungen führten in Verbindung mit reduzierten Verbrauchszielen dazu, dass auch in diesem Motorsegment Common Rail Systeme, die bis dahin beherrschenden nockengetriebenen Einspritzsysteme (kanten- bzw. zeitgesteuert) abgelöst wurden. Mit der Darstellung eines modular aufgebauten Speichereinspritzsystems ließen sich die speziellen Anforderungen dieser Anwendungsklasse umfassend erfüllen. Nachfolgend werden diese Anforderungen beschrieben und die daraus abgeleiteten Systemkomponenten in Aufbau und Funktion detailliert dargestellt. Neben den üblichen Common Rail Komponenten wie Injektor und Hochdruckpumpe werden auch die besonderen Bauelemente für Common Rail Systeme für Schwerölbetrieb behandelt.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
Literatur
Fenner, M., Barba, C., Fischer, S., Hofstädter, A., Kendlbacher, C.: Derivation of injection system requirements in the engine segment 2,5 l/cyl based on combustion design investigation on a single cylinder engine. 15. Tagung „Der Arbeitsprozess des Verbrennungsmotors“. Graz (2015)
Kendlbacher, C., Hlousek, J.: Common rail systems for large diesel engines. 24. CIMAC World Congress on Combustion Engine Technology. Kyoto (2004)
Kendlbacher, C., Müller, P., Bernhaupt, M., Rehbichler, G.: Large engine injection systems for future emission legislations. 26. CIMAC World Congress on Combustion Engine Technology. Bergen, May 2010 (2010)
Kendlbacher, C., Blatterer, D., Bernhaupt, M., Meisl, C.: The 2200 bar modular common rail injection system for large diesel and HFO engines. 27 CIMAC World Congress on Combustion Engine Technology. Shanghai, May 13.-16. 2013 (2013)
Kendlbacher, C.: A 2200 bar modular common rail injection system for diesel and dual fuel engines. Großmotorentagung Rostock, 09/2014 (2014)
Kendlbacher, C., Meisl, C., Bernhaupt, M., Schimon, R., Blatterer, D., Lengenfelder, T.: Das 2200 bar Modulare Common Rail Einspritzsystem für Diesel und Schweröl Großmotoren. 14. Tagung „Der Arbeitsprozess des Verbrennungsmotors“ in Graz, 24.-25. September (2013)
Kendlbacher, C., Blatterer, D., Bernhaupt, M.: Advanced injection systems for large marine and industrial engines. MTZ Industrial, 03/2015 (2015)
Weiterführende Literatur
Bernhaupt, M., Kendlbacher, C., Blatterer, D., Sassen, K., Lengenfelder, T.: Injection Technology for Marine Diesel Engines. MTZ Tagung Heavy Duty- on und off Highway Motoren. Kiel, Nov 2011 (2011)
Foelzer, Kammerdiener, Zallinger, Ludu; AVL List GmbH, Austria; Paper NO. 410, Aspects of a Tier 4 development for a multi-application high speed Diesel engine; CIMAC, Shanghai (2013)
Heim K., Coppo M., OMT S.p.A. Turin: Advanced common rail injection for medium speed engines. MTZ Industrial, Oct 2013 (2013)
Heim K., Coppo C., Negri C., Destro K., OMT S.p.A. Turin: Advanced HFO common rail injector for maximizing the performance of medium speed engines. 27 CIMAC World Congress on Combustion Engine Technology. Shanghai, May 13.-16 2013 (2013)
Kendlbacher, C.: Großdieseleinspritzsysteme für zukünftige Abgasgrenzwerte. MTZ Tagung Heavy Duty-,On- und Off-Highway-Motoren. Bonn, Nov 2008 (2008)
Kendlbacher, C.: Large engine injection systems for future emission legislations. Symposium about Injection Systems for IC Engines at IME in London, May 2009 (2009)
Kendlbacher, C., Leonhard, R., Parche, M.: Einspritztechnik für Schiffsdieselmotoren. MTZ Sonderheft: Die Einspritzung als Schlüsseltechnik. April 2011 (2011)
Kendlbacher, C., Blatterer, D., Bernhaupt, M.: Injection Technology for Marine Diesel Engines. MTZ Industrial, März (2012)
Ligensa M., L’Orange GmbH: Controlled common rail injector for high speed engines. CIMAC cascades, London (2014)
Marker J., Willmann M., L’Orange GmbH: Potential of INSITU closed-loop control of fuel injection in large LFO engines. 15. Tagung „Der Arbeitsprozess des Verbrennungsmotors“. Graz (2015)
Müller, P., Kendlbacher, C.: Large engine injection systems for future emission legislations. Haus der Technik. 6. Tagung Diesel- und Benzindirekteinspritzung. Berlin, Dez (2008)
Rehbichler, G., Kendlbacher, C., Bernhaupt, M.: The Bosch Electronic Diesel Control System for Medium & High Speed Engines. 27 CIMAC World Congress on Combustion Engine Technology. Shanghai, May 13.-16 2013 (2013)
Senghaas C., Ligensa M., L’Orange GmbH: New plattform based CR injector for MTU series 1163. 27 CIMAC World Congress on Combustion Engine Technology. Shanghai, May 13.-16 2013 (2013)
Thumser R., Wagner W., MDT Augsburg: Fatigue design of autofrettaged Diesel engine injection parts. 27 CIMAC World Congress on Combustion Engine Technology. Shanghai, May 13.-16 2013 (2013)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Fachmedien Wiesbaden GmbH
About this chapter
Cite this chapter
Gießauf, H., Haider, P., Schnedt, J., Kendlbacher, C. (2018). Common Rail-Systemkomponenten für Großdieselmotoren. In: Tschöke, H., Mollenhauer, K., Maier, R. (eds) Handbuch Dieselmotoren. Springer Reference Technik (). Springer Vieweg, Wiesbaden. https://doi.org/10.1007/978-3-658-07697-9_29
Download citation
DOI: https://doi.org/10.1007/978-3-658-07697-9_29
Published:
Publisher Name: Springer Vieweg, Wiesbaden
Print ISBN: 978-3-658-07696-2
Online ISBN: 978-3-658-07697-9
eBook Packages: Computer Science and Engineering (German Language)