Abstract
Elevations are one of the positional attributes embedded in all geospatial data. They are essential for a wide range of engineering and scientific activities. Some of the activities requiring precise elevations are activities of high societal impacts, such as sea level rise, storm surges and coastal inundation, floods and evacuation route planning, and crustal motion, subsidence, and other surface deformations due to seismic, mining, or other events. In order to successfully monitor and manage such events regionally (e.g., floods) or globally (e.g., sea level rise), the elevation information needs to not only be accurate but to also refer to the same zero-height reference surface (vertical datum). Accurate elevations can be obtained using spirit leveling, or by combining Global Navigation Satellite Systems (GNSS) positioning methods with a model of the geoid (the equipotential surface of the Earth’s gravity field approximating the idealized mean sea surface). So although the high accuracy requirements can in general be met, the need for a common reference surface often cannot. This is because there are currently over 100 different vertical datums around the world. Their unification is therefore a scientific problem of high practical significance.
Similar content being viewed by others
References
Amjadiparvar B, Sideris MG, Rangelova E (2013) North American height datums and their offsets: evaluation of the GOCE-based global geopotential models in Canada and USA. J Appl Geodesy 7(3):191–203
Amos MJ, Feathersone WE (2009) Unification of New Zealand’s local vertical datums: iterative gravimetric quasi-geoid computations. J Geodesy 83:57–68. doi:10.1007/s00190-008-0232-y
Argus DE, Peltier WR (2010) Constraining models of postglacial rebound using space geodesy: a detailed assessment of model ICE-5G (VM2) and its relatives. Geophys J Int 181:697–723
Bursa M et al (2008) Mean Earth’s equipotential surface from Topex/Poseidon altimetry. Stud Geophys et Geod 42:459–466
Cartwright DE, Crease J (1963) A Comparison of the geodetic-reference levels of England and France by means of the sea surface. Proc R Soc Lond Ser A Math Phys Sci 273(1355):558–580
Colombo O (1980) A world vertical network. Report 296, Department of Geodetic Science and Surveying, Ohio State University, Columbus
Featherstone WE, Filmer MS (2012) The north-south tilt in the Australian Height Datum is explained by the ocean’s mean dynamic topography. J Geophys Res 117:C08035. doi:10.1029/2012JC007974
Fischer I (1977) Mean sea level and the marine geoid – an analysis of concepts. Mar Geodesy 1:37. doi:10.1080/01490417709387950
Gatti A, Reguzzoni M, Venuti G (2013) The height datum problem and the role of satellite gravity models. J Geodesy 87:15–22. doi:10.1007/s00190-012-0574-3
Gerlach C, Fecher F (2012) Approximations of the GOCE error variance-covariance matrix for least-squares estimation of height datum offsets. J Geod Sci 2(4):247–256
Gerlach C, Rummel R (2013) Global height system unification with GOCE: a simulation study on the indirect bias term in the GBVP approach. J Geodesy 87:57–67
Heck B (2005) Problems in the definition of vertical reference frames. In: Proceedings of V Hotine Marussi Symposium on Mathematical Geodesy, Matera. International Association of Geodesy symposia, vol 127. Springer, pp 164–173
Heck B, Rummel R (1990) Strategies for solving the vertical datum problem using terrestrial and satellite geodetic data. In: Proceedings of Sea Surface Topography and the Geoid, Edinburgh. International Association of Geodesy symposia, vol 104. Springer, New York, pp 116–128
Hofmann-Wellenhof B, Moritz H (2006) Physical geodesy, 2nd edn. Springer, Wien/New York
Jekeli C (2000) Heights, the geopotential and vertical datums. OSU report no. 459. Depart of Civil and Environmental Engineering and Geodetic Science, Ohio State University, Columbus
Moritz H (2013) Classical physical geodesy. In: Freeden W, Nashed MZ, Sonar T (eds) Handbook of Geomathematics. Springer, Berlin/Heidelberg
Pail R et al (2011) First GOCE gravity field models derived by three different approaches. J Geodesy 85(11):819–843
Pavlis NK, Holmes SA, Kenyon SC, Factor JK (2012) The development and evaluation of the Earth Gravitational Model 2008 (EGM2008). J Geophys Res 117:B04406. doi:10.1029/2011JB008916
Pugh DT (1987) Tides, surges, and mean sea level. Wiley, Chichester
Rangelova E, Sideris MG, Amjadiparvar P, Hayden T (2014) Height datum unification by means of the GBVP approach using tide gauges. In: Proceedings of the VIII Hotine-Marussi Symposium on Mathematical Geodesy, Rome. International Association of Geodesy Symposia, vol 142. Springer (in press)
Rangelova E, van der Wal W, Sideris MG (2012) How significant is the dynamic component of the North American vertical datum? J Geod Sci 2(4):281–289. doi:10.2478/v10156-012-0005-7
Rapp RH, Balasubramania N (1992) A conceptual formulation of a world height system. Report 421, Department of Geodetic Science and Surveying, Ohio State University, Columbus
Rummel R, Gruber T, Sideris MG, Rangelova E, Woodworth P, Hughes C, Ihde J, Liebsch G, Rülke A, Schafer U (2014) STSE–GOCE+: height system unification with GOCE – summary and final results. ESA Study Contract Report No. GO-HSU-PR-0021. Available online at: http://www.goceplushsu.eu/gpweb/gc-cont.php?p=65
Rummel R, Ilk KH (1995) Height datum connection – the ocean part. Allg Vermessungs 8–9:321–330
Rummel R, Teunissen P (1988) Height datum definition, height datum connection and the role of the geodetic boundary value problem. Bull Géod 62:477–498
Sanchez L (2007) Definition and realization of the SIRGAS vertical reference system within a globally unified height system. In: Proceedings of Dynamic Planet, Cairns. International Association of Geodesy symposia, vol 130. Springer, pp 638–645
Sanchez L (2008) Approach for the establishment of a global vertical reference level. In: Proceedings of VI Hotine-Marussi Symposium on Theoretical and Computational Geodesy, Wuhan. International Association of Geodesy symposia, vol 132. Springer, pp 119–125
Sansò F, Sideris MG (eds) (2013) Geoid determination – theory and methods. Lecture Notes in Earth-Sciences. Springer, Berlin/Heidelberg, 734pp
Sansò F, Usai S (1995) Height datum and local geodetic datum in the theory of geodetic boundary value problems. Allg Vermussungsnachreichten, Wichmann, Heft 8–9:343–385
Sansò F, Venuti G (2002) The height datum/geodetic datum problem. Geophys J Int 149:768–775
Sideris MG, Fotopoulos G (eds) (2012) Special issue on regional and global geoid-based vertical datums. J Geod Sci 2(4):246–376
Tenzer R, Vatrt V, Gan L, Abdalla A, Dayoub N (2011) Combined approach for the unification of leveling networks in New Zealand. J Geod Sci 1(4):324–332. doi:10.2478/v10156-011-0012-0
Woodworth PL, Hughes CW, Bingham RJ, Gruber T (2012) Towards worldwide height system unification using ocean information. J Geod Sci 2(4):302–318
Xu P (1992) A quality investigation of global vertical datum connection. Geophys J Int 110:361–370. doi:10.1111/j.1365-246X.1992.tb00880.x
Xu P, Rummel R (1991) A quality investigation of global vertical datum connection. New Series, vol 34. Netherlands Geod Commission, Delft
Acknowledgements
The financial supports provided by the Natural Sciences and Engineering Research Council (NSERC) of Canada and by the European Space Agency (ESA) for the project STSE GOCE+: Height System Unification with GOCE are gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer-Verlag Berlin Heidelberg
About this entry
Cite this entry
Sideris, M. (2014). Geodetic World Height System Unification. In: Freeden, W., Nashed, M., Sonar, T. (eds) Handbook of Geomathematics. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-27793-1_83-1
Download citation
DOI: https://doi.org/10.1007/978-3-642-27793-1_83-1
Received:
Accepted:
Published:
Publisher Name: Springer, Berlin, Heidelberg
Online ISBN: 978-3-642-27793-1
eBook Packages: Springer Reference MathematicsReference Module Computer Science and Engineering