Abstract
In this paper we consider the problem of simultaneously stabilizing a civil flying wing aircraft and optimizing the control surfaces physical parameters, such as control surfaces sizes and actuators bandwidth. This flying wing configuration is characterized by unstable longitudinal modes, badly damped lateral modes, and a lack of control efficiency despite large movables. The question is then to determine the energy penalty associated to the control of these unstable modes, and more precisely to optimize the control surfaces architecture in order to minimize the control-associated energy. Our approach uses latest nonsmooth optimization techniques, which allows more possibilities on requirements specifications and controller structure compared to other approaches such as LMI-based optimizations. Results show a consistent behaviour for tuned parameters of the control surfaces.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Alazard, D.: Reverse Engineering in Control Design. John Wiley & Sons (2013)
Alazard, D., Loquen, T., de Plinval, H., Cumer, C.: Avionics/control co-design for large flexible space structures. In: AIAA Guidance, Navigation, and Control (GNC) Conference, Guidance, Navigation, and Control and Co-located Conferences. American Institute of Aeronautics and Astronautics (2013), http://dx.doi.org/10.2514/6.2013-4638
Apkarian, P.: Tuning controllers against multiple design requirements. In: 2012 16th International Conference on System Theory, Control and Computing (ICSTCC), pp. 1–6. IEEE (2012)
Apkarian, P., Noll, D., Rondepierre, A., et al.: Nonsmooth optimization algorithm for mixed h2/h∞ synthesis. In: Proc. of the 46th IEEE Conference on Decision and Control, pp. 4110–4115 (2007)
Bansal, V., Ross, R., Perkins, J., Pistikopoulos, E.: The interactions of design and control: double-effect distillation. Journal of Process Control 10(2-3), 219–227 (2000)
Fathy, H., Reyer, J., Papalambros, P., Ulsov, A.: On the coupling between the plant and controller optimization problems, vol. 3, pp. 1864–1869 (2001)
Leitmann, G.: The calculus of variations and optimal control, vol. 24. Springer (1981)
Liao, F., Lum, K.Y., Wang, J.L.: An LMI-based optimization approach for integrated plant/output-feedback controller design. In: Proceedings of the 2005 American Control Conference, pp. 4880–4885. IEEE (2005)
Liebeck, R.: Design of the blended-wing body subsonic transport. 2005-06. von Karman Institute for Fluid Dynamics (2005)
MATLAB: version 2013a. Robust Control Toolbox. The MathWorks Inc., Natick, Massachusetts, USA (2013)
Niewhoener, R.J., Kaminer, I.: Linear matrix inequalities in integrated aircraft/controller design. In: Proceedings of the 1995 American Control Conference, vol. 1, pp. 177–181. IEEE (1995)
Niewoehner, R., Kaminer, I.: Integrated aircraft-controller design using linear matrix inequalities. Journal of Guidance, Control, and Dynamics 19(2), 445–452 (1996)
Saucez, M.: Handling qualities of the airbus flying wing resolution. PhD thesis, ISAE-Airbus, Toulouse (2013)
Saucez, M., Boiffier, J.L.: Optimization of engine failure on a flying wing configuration. AIAA, Minneapolis (2012)
Silvestre, C., Pascoal, A., Kaminer, I., Healey, A.: Plant/controller optimization with applications to integrated surface sizing and feedback controller design for autonomous underwater vehicles (AUVs) (1998)
Sridharan, S., Echols, J.A., Rodriguez, A.A., Mondal, K.: Integrated design and control of hypersonic vehicles. In: American Control Conference (ACC), pp. 1371–1376. IEEE (2014)
Stein, G.: The practical, physical (and sometimes dangerous) consequences of control must be respected, and the underlying principles must be clearly and well taught. IEEE Control Systems Magazine 272(1708/03) (2003)
Taquin, G.: Flight mechanics- master of science supaero (2009)
Yang, G.H., Lum, K.Y.: An optimization approach to integrated aircraft-controller design. In: Proceedings of the 2003 American Control Conference, vol. 2, pp. 1649–1654. IEEE (2003)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this paper
Cite this paper
Denieul, Y., Bordeneuve, J., Alazard, D., Toussaint, C., Taquin, G. (2015). Integrated Design and Control of a Flying Wing Using Nonsmooth Optimization Techniques. In: Bordeneuve-Guibé, J., Drouin, A., Roos, C. (eds) Advances in Aerospace Guidance, Navigation and Control. Springer, Cham. https://doi.org/10.1007/978-3-319-17518-8_27
Download citation
DOI: https://doi.org/10.1007/978-3-319-17518-8_27
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-17517-1
Online ISBN: 978-3-319-17518-8
eBook Packages: EngineeringEngineering (R0)