Abstract
The growth in the global vehicle number and in environmental pollution result in increased requirements with respect to reducing the exhaust emissions. State of the art techniques and technologies in all industries (including all modes of transport) induce ever-greater requirements as regards manufacturing of exhaust gas emission measurement devices. Recent studies under actual in-use conditions show that the emission of certain toxic substances is by several hundred percent greater than measured on test benches, and the range of measured values is incomparably greater than in steady-state tests [3, 7, 11].
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Directive 2004/26/EC of the European Parliament and of the Council amending Directive 97/68/EC on the approximation of the laws of the Member States relating to measures against the emission of gaseous and particulate pollutants from internal combustion engines to be installed in non-road mobile machinery (April 21, 2004)
Giechaskiel, B., Dilara, P., Sandbach, E., et al.: Particle Measurement Programme (PMP) Light-Duty Inter-laboratory Exercise: Comparison of Different Particle Number Measurement Systems. Measurement Science and Technology 19 (2008)
Khair, M., Khalek, I., Guy, J.: Portable Emissions Measurement for Retrofit Applications – The Beijing Bus Retrofit Experience. SAE Technical Paper Series 2008-01-1825 (2008)
Marciniak, Z., Pielecha, I.: Próby i badania silników spalinowych lokomotyw i lekkich pojazdów szynowych w aspekcie poprawy ich parametrów eksploatacyjnych. Paper presented at the XVIII Konferencja Naukowa, Pojazdy Szynowe, Katowice-Ustroń (2008)
Marciniak, Z., Pielecha, I.: Wpływ silników spalinowych pojazdów trakcyjnych eksploatowanych w kraju na środowisko – próby i badania oraz wytyczne dla redukcji emisji składników szkodliwych. Pojazdy Szynowe 1 (2009)
Merkisz, J., Lijewski, P., Fuć, P., et al.: Exhaust Emission Tests of Agricultural Machinery under Real Operating Conditions. SAE Technical Paper Series 2010-01-1949 (2010)
Merkisz, J., Pielecha, J., Pielecha, I.: Gaseous and PM Emission from Combat Vehicle Engines during Start and Warm-Up. SAE Technical Paper Series 2010-01-2283 (2010)
Norma PN-EN ISO 8178-4. Silniki spalinowe tłokowe. Pomiar emisji spalin. Cykle badawcze silników o różnym zastosowaniu (1999)
Pielecha, I., Pielecha, J.: Tendencje w przepisach dotyczących emisji związków toksycznych przez silniki spalinowe pojazdów szynowych. Pojazdy Szynowe 1 (2005)
Schwenger, C., Wagner, U., Spicher, U.: Investigation of the Inflow Behavior of a Diesel Particulate Filter Using Laser-Optical Measurement Techniques During Soot Loading and Filter Regeneration with the Aim of Improving these Processes. Paper presented at the THIESEL Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines, Valencia (2010)
Sharp, C.A., Feist, M.: Results of the HDIUT Gaseous PEMS Measurement Allowance Program and Update on PM Program Status. Paper presented at the Sensors 4th Annual SUN (SEMTECH User Network) Conference, Ann Arbor (2007)
Wei, Q., Rooney, R.: The On-Board PM Mass Calibration for the Real-Time PM Mass Measurement. SAE Technical Paper Series 2010-01-1283 (2010)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Merkisz, J., Pielecha, J., Radzimirski, S. (2014). Measurements of Exhaust Emissions In-use Conditions. In: New Trends in Emission Control in the European Union. Springer Tracts on Transportation and Traffic, vol 4. Springer, Cham. https://doi.org/10.1007/978-3-319-02705-0_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-02705-0_6
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-02704-3
Online ISBN: 978-3-319-02705-0
eBook Packages: EngineeringEngineering (R0)