Abstract
As machining is one of the fundamental technological disciplines, knowledge of cutting forces is of great importance, so this paper presents an information measurement system, which was developed with the aim of measuring cutting forceat the machining process of longitudinal turning. The contribution of this paper is that it allows for a simple acquisition of experimental data using a dynamometer (piezo-plate) to measure the cutting force during cutting and thus form a procedure for calibration of measuring devices. Measurements of three components of force were conducted in three mutually perpendicular directions Fc, Fr and Ft for bronze alloy, using modern measuring equipment, piezo-plate, as well as an eight-channel universal amplifier. The obtained digital data were processed in the MX Assistant and MATLAB software.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Kalpakjian, S., Schmid, S.: Manufacturing Processes for Engineering Materials, Fifth Edition. Pearson Prentice Halle (2008). ISBN-13 978–981–06–7953–8
Stanić, J., Kalajdžić, M., Kovačević, R.: Merna tehnika u tehnologiji obrade metala rezanjem. IRO „GRAĐEVINSKA KNJIGA”, Beograd (1983)
Bulatović, R.: Mašinski elementi I - Drugo izdanje. Univerzitet Crne Gore - Mašinski fakultet, Podgorica (2016). ISBN 978-9940-527-15-0
Kistler Group, Multicomponent Dynamometer, 9257B_000–151e-07.18 (2018). www.kistler.com
Kistler Group, Instruction Manual, 9257B_002–054e-03.15 (2015). www.kistler.com
Kistler Group, Cables, 1631C_000–346e-12.13 (2013). www.kistler.com
Kistler Instrument Corp, Piezo-Instrumentation, Nr. 11.5007, Ed. 8.82, P. 1...4
Hottinger Bruel & Kjaer GmbH, Operating Manual, HBM Test and Measurement, DVS: A03031_24_E00_01 (2021)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Šibalić, N., Mumović, M. (2022). Information Measurement System for Determination of Cutting Force at Turning Technology. In: Karabegović, I., Kovačević, A., Mandžuka, S. (eds) New Technologies, Development and Application V. NT 2022. Lecture Notes in Networks and Systems, vol 472. Springer, Cham. https://doi.org/10.1007/978-3-031-05230-9_45
Download citation
DOI: https://doi.org/10.1007/978-3-031-05230-9_45
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-05229-3
Online ISBN: 978-3-031-05230-9
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)