Abstract
The paper presents the results of the physicochemical properties test of biodegradable polymer coating on CoCrMo alloy intended for applications in urology. The Co alloy was subjected to grinding, mechanical polishing and chemical passivation and was coated by the dip-coating method with a poly(L,L-lactide-\(\varepsilon \)-caprolactone)—PLCL biodegradable polymer. The paper shows the results of the macroscopic evaluation, study of wettability and surface roughness, potentiodynamic resistance to pitting corrosion in a solution of artificial urine and adhesion test. Based on these results, suitability/usefulness for use in urology of biodegradable PLCL polymer coating on CoCrMo alloy was assessed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Adam, A., de Jongh, R., Mathye, Ch., Bhattu, A.S., Patel, H.: The first report of 3 forgotten encrusted double J stents in the same ureter: an endourology nightmare! Afr. J. Urol. 23, 224–227 (2017)
Basiaga, M., Kajzer, W., Walke, W., Kajzer, A., Kaczmarek, M.: Evaluation of physicochemical properties of surface modified Ti6Al4V and Ti6Al7Nb alloys used for orthopedic implants. Mater. Sci. Eng. C 68, 851–860 (2016)
Baysens, M., Tailly, T.O.: Ureteral stents in urolithiasis. Asian J. Urol. 5, 274–286 (2018)
Belfield, K., Chen, X., Smith, E.F., Ashraf, W., Bayston, R.: An antimicrobial impregnated urinary catheter that reduces mineral encrustation and prevents colonization by multi-drug resistant organisms for up to 12 weeks. Acta Biomater. 90, 157–168 (2019)
Bzoma, B., Kostro, J., Hellman, A., Chamienia, A., Hać, S., Dębska-Ślizień, A., Śledziński, Z.: Ureteric stenting in kidney transplant recipients, Gdansk Centre Experience, Poland. Transplant. Proc. 50, 1858–1862 (2018)
Fabian, K.M.: The intra-prostatic ‘partial catheter’ (urological spiral) II. Der Urologe 19(4), 236–238 (1980)
Forbes, C., Scotland, K.B., Lange, D., Chew, B.H.: Innovations in ureteral stent technology. Urol. Clin. N. Am. 46(2), 245–255 (2019)
Georglev, P., Bonl, Ch., Dahm, F., Maurus, Ch.F., Wlldl, S., Rousson, V., Wuthrich, R.P., Clavlen, P.-A., Weber, M.: Routine stenting reduces urologic complications as compared with stenting “on demand” in adult kidney transplantation. Urology 70, 893–897 (2007)
Hildebrandt, P., Sayyad, M., Rzany, A., Schaaldach, M., Seiter, H.: Prevention of surface encrustation of urological implants by coating with inhibitors. Biomaterials 22, 503–507 (2001)
Jaworska, J., Jelonek, K., Kajzer, W., Szewczenko, J., Kaczmarczyk, B., Marcinkowski, A., Janeczek, H., Pastusiak, M., Basiaga, M., Kasperczyk, J.: Comparison of biodegradable poly(glycolide- \(\varepsilon \)-caprolactone) and poly(glycolide-\(\varepsilon \)-caprolactone-D, L-lactide) coatings enriched with ciprofloxacin formed on Ti6Al4V alloy. Polym. Degrad. Stab. 155, 136–144 (2018)
Jaworska, J., Jelonek, K., Sobota, M., Kasperczyk, J., Dobrzynski, P., Musial-Kulik, M., Smola-Dmochowska, A., Janeczek, H., Jarzabek, B.: Shape-memory bioresorbable terpolymer composite with antirestenotic drug. J. Appl. Polym. Sci. 17, 132 (2015)
Jelonek, K., Kasperczyk, J.: Polyesters and polyester carbonates for controlled drug delivery. Part I. Polymers 58, 654–662 (2013)
Kajzer, W., Jaworska, J., Jelonek, K., Szewczenko, J., Kajzer, A., Nowińska, K., Hercog, A., Kaczmarek, M., Kasperczyk, J.: Odporność korozyjna stopu Ti6Al4V pokrytego biodegradowalnymi powłokami polimerowymi na bazie kaprolaktonu. Maint. Reliab. 20(1), 30–38 (2018)
Kajzer, W., Jaworska, J., Jelonek, K., Szewczenko, J., Nowińska, K., Kajzer, A.: Effect of sterilization and long-term exposure to artificial urine on corrosion behavior of metallic biomaterials with poly(glicolide-co-caprolactone) coatings. In: Gzik, M., Tkacz, Ew., Paszenda, Z., Piętka, E. (eds.) Innovations in Biomedical Engineering, pp. 391–398. Springer International Publishing, Cham (2018)
Kallidonis, P., Kotsiris, D., Sanguedolce, F., Natasiotis, P., Liatsikos, E., Papatsoris, A.: The effectiveness of ureteric metal stents in malignant ureteric obstruction: a systematic review. Arab J. Urol. 15, 280–288 (2017)
Kotsar, A., Nleminen, R., Isotalo, T., Mlkkonen, J., Uurto, I., Kellomaki, M., Talja, M., Mollanen, E., Tammela, T.L.J.: Biocompatibility of new drug-eluting biodegradable urethral stent materials. Urology 75, 229–234 (2010)
Liatsikos, E.N., Karnabatidis, D., Kagadis, G.C., Katsakiori, P.F., Stolzenburg, J.-U., Nikiforidis, G.C., Permenis, P., Siblis, D.: Metal stents in the urinary tract. EAU-EBU Update Ser. 5, 77–88 (2007)
Matiz, M.F.: Applications of synthetic polymers in clinical medicine. Biosurface Biotribology 1, 161–176 (2015)
Szewczenko, J., Kajzer, W., Grygiel-Pradelok, M., Jaworska, J., Jelonek, K., Nowińska, K., Gawliczek, M., Libera, M., Marcinkowski, A., Kasperczyk, J.: Corrosion resistance of PLGA-coated biomaterials. Acta Bioeng. Biomech. 19(1), 173–179 (2017)
Tao, G., Wu, G., Yang, L., Wang, F., Han, Ch., Liu, F., Yuan, J.: Fragmentation of severely encrusted ureteral stent indwelled for 4 years in a boy. Urol. Case Rep. 12, 1–3 (2017)
Tian, Q., Zhang, Ch., Deo, M., Rivera-Castaneda, L., Masoudipour, N., Guan, R., Liu, H.: Responses of human urothelial cells to magnesium-zinc-strontium alloys and associated insoluble degradation products for urological stent applications. Mater. Sci. Eng. C 96, 248–262 (2019)
Walke, W., Basiaga, M., Paszenda, Z., Kajzer, A., Kajzer, W., Pustelny, T., Drewniak, S., Opilski, Z., Jendruś, R., Szewczenko, J.: Influence of surface modification on physico-chemical properties of Ti6Al7Nb alloy. Surf. Coat. Technol. 307, 753–760 (2016)
Yang, L., Whiteside, S., Cadieux, P.A., Denstedt, J.D.: Ureteral stent technology: drug-eluting stents and stent coatings. Asian J. Urol. 2, 164–201 (2015)
Acknowledgements
The work has been financed from research project no \(07/020/BK_19/0050\).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Kajzer, W. et al. (2021). Study of Physicochemical Properties of CoCrMo Alloy with PLCL Polymer Coating Intended for Urology. In: Gzik, M., Paszenda, Z., Pietka, E., Tkacz, E., Milewski, K. (eds) Innovations in Biomedical Engineering. AAB 2020. Advances in Intelligent Systems and Computing, vol 1223. Springer, Cham. https://doi.org/10.1007/978-3-030-52180-6_28
Download citation
DOI: https://doi.org/10.1007/978-3-030-52180-6_28
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-52179-0
Online ISBN: 978-3-030-52180-6
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)