Abstract
Elastic actuators are popular in human-robot interaction as they can improve human safety and efficiency. Yet, such actuators are more complex than rigid ones and might be subject to additional technical faults, e.g., stiffness changes. This paper extends previous studies on stiffness-fault-tolerant physical human-robot interaction (pHRI) through control adaptation, introducing new methods for stiffness estimation and fault evaluation. Kalman filters with different measurement signals and system models estimating the actual stiffness value of the elastic element are compared. Faults are evaluated by analyzing the structural durability and compensated by adapting an impedance controller to provide a desired interaction stiffness. Experiments with a series elastic actuator underline the feasibility of the evaluation and compensation methods for attaining safe and reliable pHRI. Results show that stiffness estimation during pHRI is possible when the actuator friction and interaction torque is either negligible or well known, or when the torque at the spring is measured.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Haddadin, S., Albu-Schaeffer, A., De Luca, A., Hirzinger, G.: Collision detection and reaction: a contribution to safe physical human-robot interaction. In: IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 3356–3363 (2008)
Haddadin, S., Albu-Schäffer, A., Hirzinger, G.: Safe physical human-robot interaction: measurements, analysis and new insights. In: ISRR, vol. 66, pp. 395–407. Springer, Heidelberg (2007)
Lens, T., von Stryk, O.: Investigation of safety in human-robot-interaction for a series elastic, tendon-driven robot driven robot arm. In: IEEE/RSJ International Conference on Intelligent Robots and Systems (2012)
Vanderborght, B., Van Ham, R., Lefeber, D., Sugar, T.G., Hollander, K.W.: Comparison of mechanical design and energy consumption of adaptable, passive-compliant actuators. Int. J. Robot. Res. 28(1), 90–103 (2009)
Verstraten, T., Beckerle, P., Furnémont, R., Mathijssen, G., Vanderborght, B., Lefeber, D.: Series and parallel elastic actuation: impact of natural dynamics on power and energy consumption. Mech. Mach. Theory 102, 232–246 (2016)
Beckerle, P.: Practical relevance of faults, diagnosis methods, and tolerance measures in elastically actuated robots. Control Eng. Pract. 50, 95–100 (2016)
Filippini, R., Sen, S., Bicchi, A.: Toward soft robots you can depend on. IEEE Robot. Autom. Mag. 15(3), 31–41 (2008)
Vanderborght, B., Albu-Schaeffer, A., Bicchi, A., Burdet, E., Caldwell, D., Carloni, R., Catalano, M., Eiberger, O., Friedl, W., Ganesh, G., Garabini, M., Grebenstein, M., Grioli, G., Haddadin, S., Hoppner, H., Jafari, A., Laffranchi, M., Lefeber, D., Petit, F., Stramigioli, S., Tsagarakis, N., Damme, M.V., Ham, R.V., Visser, L., Wolf, S.: Variable impedance actuators: a review. Robot. Auton. Syst. 61(12), 1601–1614 (2013)
Pratt, G.A., Williamson, M.M.: Series elastic actuators. In: IEEE/RSJ International Conference on Intelligent Robots and Systems (1995)
Schiavi, R., Grioli, G., Sen, S., Bicchi, A.: VSA-II: a novel prototype of variable stiffness actuator for safe and performing robots interacting with humans. In: IEEE International Conference on Robotics and Automation (2008)
Isermann, R.: Fault-Diagnosis Systems: An Introduction from Fault Detection to Fault Tolerance. Springer, Heidelberg (2006)
Blanke, M., Kinnaert, M., Lunze, J., Staroswiecki, M.: Diagnosis and Fault-Tolerant Control. Springer, Heidelberg (2010)
Stuhlenmiller, F., Perner, G., Rinderknecht, S., Beckerle, P.: A stiffness-fault-tolerant control strategy for reliable physical human-robot interaction. In: Human Friendly Robotics, pp. 3–14. Springer, Heidelberg (2019)
Lendermann, M., Singh, B.R.P., Stuhlenmiller, F., Beckerle, P., Rinderknecht, S., Manivannan, P.V.: Comparison of passivity based impedance controllers without torque-feedback for variable stiffness actuators. In: IEEE/ASME International Conference on Advanced Intelligent Mechatronics (2015)
Schuy, J., Beckerle, P., Wojtusch, J., Rinderknecht, S., von Stryk, O.: Conception and evaluation of a novel variable torsion stiffness for biomechanical applications. In: IEEE/RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics, pp. 713–718 (2012)
Spong, M.W.: Adaptive control of flexible joint manipulators. Syst. Control Lett. 13, 15–21 (1989)
Andersson, S., Söderberg, A., Björklund, S.: Friction models for sliding dry, boundary and mixed lubricated contacts. Tribol. Int. 40(4), 580–587 (2007)
Lemaitre, J., Dufailly, J.: Damage measurements. Eng. Fract. Mech. 28(5), 643–661 (1987)
Flacco, F., De Luca, A.: Residual-based stiffness estimation in robots with flexible transmissions. In: 2011 IEEE International Conference on Robotics and Automation (ICRA), pp. 5541–5547. IEEE (2011)
Julier, S., Uhlmann, J.: Unscented filtering and nonlinear estimation. Proc. IEEE 92(3), 401–422 (2004)
Wan, E.A., Van Der Merwe, R.: The unscented Kalman filter for nonlinear estimation. In: Adaptive Systems for Signal Processing, Communications, and Control Symposium 2000. AS-SPCC. The IEEE2000, pp. 153–158. IEEE (2000)
Wu, M., Smyth, A.: Application of the unscented kalman filter for real-time nonlinear structural system identification. Struct. Control Health Monit. 14, 971–990 (2007)
Schuy, J., Beckerle, P., Faber, J., Wojtusch, J., Rinderknecht, S., von Stryk, O.: Dimensioning and evaluation of the elastic element in a variable torsion stiffness actuator. In: IEEE/ASME International Conference on Advanced Intelligent Mechatronics (2013)
de Souza Neto, E.A., Perić, D., Owen, D.R.J.: Computational Methods for Plasticity. Wiley, Hoboken (2008)
Ott, C.: English Cartesian Impedance Control of Redundant and Flexible-Joint Robots. Springer, Heidelberg (2008)
Kaur, N., Kaur, A.: A review on tuning of extended kalman filter using optimization techniques for state estimation. Int. J. Comput. Appl. 145(15), 1–5 (2016)
Acknowledgment
This work was supported by a Deutsche Forschungsgemeinschaft (DFG) Research Grant (no. BE 5729/1).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Appendices
Appendix
A Filter Covariance Matrices
-
EKF with complete actuator model:
$$\begin{aligned} \mathbf {Q}= 1 \times 10^{-7} \text {diag}\left( 1,1000,1,1000,100000,100,100\right) , \,\, \mathbf {R}= 1 \times 10^{-7} \mathbf {I}_7. \end{aligned}$$ -
EKF with torque sensor at the spring:
$$\begin{aligned} \mathbf {Q} = \text {diag}\left( 1 \times 10^{-20},1 \times 10^{-15}\right) , \,\, \mathbf {R} = 1 \times 10^{-20}\mathbf {I}_2. \end{aligned}$$ -
UKF with torque sensor at the spring:
$$\begin{aligned} \mathbf {Q}=\left[ 1 \times 10^{-5}\right] , \,\, \mathbf {R}= \left[ 1 \times 10^{-8}\right] . \end{aligned}$$
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Stuhlenmiller, F., Velasco-Guillen, R.J., Rinderknecht, S., Beckerle, P. (2020). Fault-Tolerant Physical Human-Robot Interaction via Stiffness Adaptation of Elastic Actuators. In: Ferraguti, F., Villani, V., Sabattini, L., Bonfè, M. (eds) Human-Friendly Robotics 2019. HFR 2019. Springer Proceedings in Advanced Robotics, vol 12. Springer, Cham. https://doi.org/10.1007/978-3-030-42026-0_6
Download citation
DOI: https://doi.org/10.1007/978-3-030-42026-0_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-42025-3
Online ISBN: 978-3-030-42026-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)